Page 3 - Welcome; THANK YOU FOR CHOOSING VIZIO; Extended Warranties; WHEN READING THIS MANUAL
Welcome THANK YOU FOR CHOOSING VIZIO And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged pa...
Page 6 - Lightning Protection
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical...
Page 7 - Table of Contents; Changing the Appearance of Digital Closed Captions . 32
Table of Contents 1 Installing the TV ................................................ 3 Inspecting the Package Contents ..................................... 3Installing the TV ................................................................... 3 Installing the TV Stand ...............................
Page 9 - Installing the TV; INSPECTING THE PACKAGE CONTENTS; Installing the TV Stand; PACKAGE CONTENTS
3 1 Installing the TV INSPECTING THE PACKAGE CONTENTS Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. VIZIO LED HDTV with Stand INSTALLING THE TV After removing the TV from the box and inspecting the package ...
Page 13 - Controls and Connections; Stereo Audio Out; sound bar or headset.; USB; - Connect USB thumb drive to play photos.; REAR PANEL; - Connect component or composite device.
2 7 REAR PANEL Controls and Connections Stereo Audio Out - Connect 3.5mm audio device, such as a sound bar or headset. USB - Connect USB thumb drive to play photos. REAR PANEL RGB - Connect VGA cable from PC. PC Audio In - Connect 3.5mm audio cable from PC. HDMI - Connect HDMI device. Component/Comp...
Page 14 - SIDE PANEL; Press and hold to
2 8 SIDE PANEL SIDE PANEL POWER - Press and hold to turn TV on or off. INPUT - Press to change input source.
Page 15 - REMOTE SENSOR & POWER INDICATOR; When using the remote, aim it directly at this sensor.; FRONT PANEL
2 9 FRONT PANEL REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on pa...
Page 16 - REMOTE CONTROL
2 10 REMOTE CONTROL REMOTE CONTROL INPUT EXIT GUIDE BACK 1 4 7 WIDE MENU OK VOL VOL CH CH 3 6 9 — 2 5 8 0 INPUT Change the currently-displayed input. ARROW Navigate the on-screen menu. EXIT Close the on-screen menu. WIDE Switch the display mode. MUTE Turn the audio off or on. BACK Go to the previous...
Page 17 - Replacing the Batteries; Insert two batteries into the remote control. Make sure that
2 11 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
Page 18 - Connecting Your Devices; CONNECTING A DEVICE; Game Console; BEST; GOOD; BACK OF TV; BETTER
3 12 Connecting Your Devices CONNECTING A DEVICE Game Console Cable/Satellite Box DVD/Blu-ray Player Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). 2. Turn the TV and your device of...
Page 19 - CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
3 13 COAXIAL CABLE Coaxial cables are the traditional way of connecting antennas and cable television signals to your TV. Coaxial cables carry both audio and video signals through a single connector. AV CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to your ...
Page 21 - CONNECTING A COMPUTER; VGA Cable
3 15 CONNECTING A COMPUTER Personal Computer Your TV can be used to display output from a personal computer. To use your TV as a PC display: 1. Connect a VGA cable (not included) to your PC and the RGB port on the back of the TV. This cable transmits video. 2. Connect a 3.5mm cable (not included) to...
Page 22 - CONNECTING AN AUDIO DEVICE
3 16 CONNECTING AN AUDIO DEVICE Home Audio Receiver VIZIO Sound Bar Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has an audio port that matches an available port on the TV (HDMI, RCA, etc). 2. Turn the TV and your audio device off. 3. Conne...
Page 23 - • ARC 2-way Communication; CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES
3 17 HDMI CABLE HDMI technology transmits crystal-clear digital multi-channel surround audio through a single HDMI cable. Audio Return Channel-enabled (ARC) TVs allow audio to be sent over an already connected HDMI cable, eliminating the need for a separate audio cable. See Connecting an Audio Devic...
Page 24 - CONNECTING AN AUDIO DEVICE - ARC
3 18 Without HDMI ARC With HDMI ARC CONNECTING AN AUDIO DEVICE - ARC HDMI HDMI Your Home Audio Receiver Your Blu-Ray Player Your TV HDMI HDMI Your Home Audio Receiver Your Blu-Ray Player With an HDMI ARC setup, the audio connection between your TV and Home Audio Receiver can be removed. The HDMI cab...
Page 25 - Completing the First-Time Setup
4 19 Completing the First-Time Setup The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use. Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. ...
Page 26 - Using the On-Screen Menu; VIZIO; NAVIGATING THE ON-SCREEN MENU
5 20 Using the On-Screen Menu Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the MENU button on the remote. From this menu, you can: • Adjust the Picture settings• Adjust the Audio settings• Activate the Sleep Timer • Adjust the Tuner settings• Set up Closed Captio...
Page 28 - ADJUSTING THE PICTURE SETTINGS
5 22 ADJUSTING THE PICTURE SETTINGS Your TV display can be adjusted to suit your preferences and viewing conditions. To adjust the picture settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Picture and press OK . The...
Page 32 - ADJUSTING THE AUDIO SETTINGS
5 26 ADJUSTING THE AUDIO SETTINGS To adjust the audio settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK . The AUDIO menu is displayed. 3. Use the Arrow buttons to highlight the setting you wish to...
Page 33 - ACTIVATING THE SLEEP TIMER
5 27 Resetting the Audio Settings To reset the audio settings to the factory default settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK . The AUDIO menu is displayed. 3. Use the Arrow buttons to hi...
Page 34 - SETTING UP THE TUNER
5 28 Setting the Auto Power Off Feature To help save energy, your TV is set by default to turn off after 10 minutes if no signal is being displayed on the screen. This feature can be deactivated. To set the Auto Power Off feature: 1. From the TIMER menu, use the Up/Down Arrow buttons on the remote t...
Page 38 - SETTING UP CLOSED CAPTIONING
5 32 SETTING UP CLOSED CAPTIONING Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. The Closed Captioning menu only appears when the input is an antenna for Over-the-Air signals, cable TV directly from the wall (no ca...
Page 39 - Closed caption text sample
5 33 Typical choices include: • Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode. • Opaque background and window in the same color— When text appears, the entire line fills with co...
Page 40 - RENAMING DEVICES ON THE INPUT MENU
5 34 RENAMING DEVICES ON THE INPUT MENU Inputs can be renamed to make them easier to recognize on the Input menu (see Changing the Input Source on page 22). For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” To change the name o...
Page 41 - CHANGING THE TV SETTINGS
5 35 CHANGING THE TV SETTINGS Using the system menu, you can: • View the System Information• Set up Parental Controls• Change the on-screen menu language • Set the Time• Adjust the CEC Settings• Adjust the Power Indicator settings • Reset TV Settings & Set up Admin Controls Help VIZIO Network Sl...
Page 46 - USING THE RESET & ADMIN MENU
5 40 USING THE RESET & ADMIN MENU You can use the TV’s Reset & Admin menu to: • Restore the TV to its factory default settings Help VIZIO Network Sleep Timer Input CC ABC Audio Wide Normal Picture Settings Panoramic Wide Zoom 2D 3D Exit RESET & ADMIN Reset TV to Factory Defaults Restorin...
Page 47 - USING THE GUIDED SETUP MENU
5 41 USING THE GUIDED SETUP MENU Using Guided Setup The TV’s Setup App can be used to easily set up the TV tuner. To use guided setup: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Highlight Guided Setup and press OK . The GUIDED SETUP menu is displayed. 3. Highlight th...
Page 48 - USING THE INFO WINDOW; GUIDE; Oliver’s Holiday Surprise; he’ll encounter on the way?; Program Description; Channel/Input Information
5 42 USING THE INFO WINDOW The Info Window can be displayed by pressing the GUIDE button on the remote: • Press the GUIDE button one time to display channel, input, and display information. • Press the GUIDE button two times to display the program title, program rating, audio information, and the st...
Page 49 - Using the USB Media Player; USING THE USB MEDIA PLAYER
6 43 Using the USB Media Player USING THE USB MEDIA PLAYER The USB Media Player allows you to connect a USB thumb drive to your TV and view photos. Connecting a USB Thumb Drive to the TV 1. Turn the TV off. Connect your USB thumb drive to the USB port on the back of the TV. 2. Press the Power/Standb...
Page 50 - View Thumbnails or
6 44 Start Slideshow Name A-Z Thumbnails Settings View: Sort: Photo VIZIO_2GB\Photo\root File Name: D 1920x1080 Resolution: 1920x1080 Size: 1607270KB USB1: A.jpg root B.jpg C.jpg D.jpg E.jpg F.jpg G.jpg H.jpg I.jpg Page 1 of 1 VIZIO Folder Contents This area displays the contents of the currently se...
Page 51 - Troubleshooting & Technical Support; DO YOU HAVE QUESTIONS?; YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT; Hours of operation:; We speak English • Se habla Español • Nous parlons Français
A Troubleshooting & Technical Support DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT Phone: Email: Web: (877) 878-4946 (TOLL-FREE) [email protected] www.VIZIO.com/support Hours of operation: Monday - Friday: 5 AM TO 8 PM (PST) Saturday - Sunday: 7 AM TO ...
Page 54 - Specifications; LED; Component Video Inputs:; Optical Digital
B 48 Specifications E231-B1 E241-B1 Screen Size: 23” Class 24” Class Viewable Area: 22.95” 23.54” Dimensions w/ Stand: w/o Stand: 21.49” x 14.67” x 4.43” 21.49” x 13.94” x 2.11” 21.55” x 14.55” x 4.39” 21.55” x 13.80” x 2.11” Weight w/ Stand: w/o Stand: 6.39 lbs 6.17 lbs 7.05 lbs 6.83 lbs TV Type: L...
Page 55 - Remote Control Model:; Energy Star
B 49 E231-B1 E241-B1 OSD Language: English, Spanish, French English, Spanish, French Remote Control Model: XRT020 XRT020 Certifications: UL, FCC Class B, HDMI, Dolby Digital UL, FCC Class B, HDMI, Dolby Digital Compliance: Energy Star Energy Star Voltage Range: 120V @ 60 Hz 120V @ 60 Hz Power Consum...
Page 56 - Limited Warranty
C 50 Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of...
