Vizio CPU-55 - Manual

Camp-On Privacy When the party you are calling has his station on Privacy mode, by simply waiting you will automatically "Camp-On" the line. (Busy tone sounds continuously.) As soon as the Privacy mode is released, you will be automaticallyconnected. This function is cancelled automatically ...

Personal Number Call A personal number may be registered at any master station which the person to whom the number is assigned expects to be. A party wishing to receive personal number calls ata specific station may register his number at that station by touch dialing Personal Number. Those who are ...

Single Digit Dialing Single digit registration Register in advance as follows: Confirmation tone Station number (2 digits for 2-digit dial) Confirmation tone Personal number Confirmation tone Paging zone Confirmation tone 0 : All call response : Confirmation tone Any four digits Confirmation tone Co...

Master Sub Relationship Master/Substation associations are set up by using station #200 as the programming station. Once these relationships have been established, substations can then contact their designated master stations by simply touch dialing With respect to this function, the stations in the...

Secretary Transfer This function is only available when a specified station is programmed for this purpose with use of Station #200 in the programming mode. Automatic transfer of incomingcalls by an executive to his secretary is accomplished by placing the Privacy Switch on his station in the ON pos...

Call Transfer Call Transfer from Called Station During the conversation, first dial (the Station Number of the person the call is to be trans- ferred to). The original call is then held and the holding tone is trans- mitted to the other party, while the third party is called and asked whether he wil...

Priority When the party called is on the line, as indicated by the busy tone, dialing transmits a priority tone to the called party. The same tone is audible at the calling station. The call is connected if the called party also responds by dialing In this event, the original conversation partner of...

Talk Back First, call the "Talk-Back" station as in a normal c a l l . ( " T a l k - B a c k " station) The Calling tone will sound and the message is transmitted. In this case, while the calling station has the Press-To-Talk bar depressed, the caller can transmit a one-way message. ...

Conference A "Hands-Free" conference call can be made with up to 4 persons. For a conference under this function the other participants may be called either through their station num-ber, personal number or by Single Digit Dialing. Addition of stations or personal numbers (total of only 4) m...

Paging A variety of paging modes allows paging over a wide areafrom any master station. The paged party may respondfrom the nearest master station. Paging modes include external PA systems and/or Stationpaging and Zone paging is for calling a limited area, and A l l - c a l l paging is for calling o...

Note: Priority of Paging Emergency a l l - c a l l paging > A l l - c a l l paging > Combination paging = ( I n d i v i d u a l ) zone paging 1. The higher priority page overrides the lower priority one. The lower priority page w i l l berestored when the higher priority page is termi-nated. 2...

Paging area All-call paging Calling Maximum of 15 zones Combination pagingof up to 10 zones No. 0 1 7 8 15 90 99 Paging External PA paging All-call and maximum of 7 zones paging Combination zone Available Available, provided the combination zone is withinthe zone of 1 through 15. Station paging All-...

All-Call Paging and Individual Zone Paging External PA paging to a specific zone is possible from any master station by pressing and the desired zone number ('0' = a l l - c a l l ) . It is possible towait for a response in this mode, but anything said will be broadcast over the entire zone. It is b...

Combination Paging Several zones can be called simultaneously using external PA paging and station paging. This is combination paging and is initiated by pressing Paging will be broadcast to predetermined zones. It is possible to wait for a response in this mode, but it is usually preferable to ter-...

To operate combination paging, No. 200 registration indi- cating the individual zones to be included in the combina-tion zone-must be made. For further details, refer to Installation Hand Book forEXES-5000 CPU-55. Table of zones included in combination zones (Example) Combination zone 90 91 92 93 94...

Paging Priority When using the standard paging functions, paging is not < Example > heard while other calls are in progress. Using paging priority: 1. Dial When the station being paged is already on the line, the call is interrupted. And the calling party is put on hold while the paging messag...

Programmable Station Numbering This function allows the system to have "Programmable station numbers", other than the "Hardwired stationnumbers" by programming. The unprogrammed stations (unit station numbers) are used as original hardwired station numbers. 1. Numbering schedules can...

1. For a conference call, only those stations allowed to use the conference link can dial. The other members of the conference need not beallowed conference access. 2. No. 200 programming of the specified station must be made in the exchange. For further details, please refer to Installation Hand Bo...

Calling Party Indication (7-SEG Display Type) A numerical type calling party indication panel can be provided for certain specified stations (32 stations from No. 200 to No. 231). 1. The party receiving the call is indicated in the area for the calling station number with 7 segment display. 2. When ...

General Purpose Control Station may be restricted from access to this function. This function can control other equipments by employing the Data Transmitting and Receiving Units. Select the required type of output. (Mode 1) One-shot make output Dial (000 ~ 499, max. of 500 contacts) and the relay ou...