Vivotek IP71353 - Manual

- 7 - www.vivotek.com Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. Hardware installation Please verify that your product packa...

- 9 - www.vivotek.com Once installation is complete, the Administrator should proceed to the next section "Initial access to the Network Camera" for necessary checks and configurations. Initial Access to the Network Camera Check Network Settings The Network Camera can be connected either bef...

- 11 - www.vivotek.com Installing plug-in For the initial access to the Network Camera in Windows, the web browser may prompt for permission to install a new plug-in for the Network Camera. Permission request depends on the Internet security settings of the user’s PC or notebook. If the highest secu...

- 14 - www.vivotek.com Client settings At the initial access to the “Connection type” page in Windows, the web browser will ask for a new plug-in installation, the plug-in being the Network Camera. This plug-in has been registered for certification and can be used to change the parameters at the cli...

- 17 - www.vivotek.com Administrator’s capability Fine-tuning for Best Performance Best performance generally equates to the fastest image refresh rate with the best video quality, and at the lowest network bandwidth as possible. The three factors, “Maximum frame rate”, “Constant bit rate”, and “Fix...

- 19 - www.vivotek.com speed and adjust the frame rate. Start from 30 fps down for best results but not below 15 fps. If the image qualities are not improved, select a lower bandwidth setting. - 20 - www.vivotek.com Opening accounts for new users Protect Network Camera by passwords The Network Camer...

- 21 - www.vivotek.com Build a security application The Administrator can use the built-in motion detection to monitor any movement to perform many useful security applications. To upload the snapshots, users can choose either email or FTP according to user’s needs. Both e-mail and FTP use the netwo...

- 22 - www.vivotek.com Software revision upgrade Customers can obtain the up-to-date software from the web site of Vivotek. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system,...

- 23 - www.vivotek.com Definitions in Configuration Only the Administrator can access system configuration. Each category in the left column will be explained in the following pages. The bold texts are the specific phrases on the Option pages. The Administrator may type the URL below the figure to d...

- 25 - www.vivotek.com Security settings “Root password” Change the Administrator’s password by typing in the new password identically in both text boxes. The typed entries will be displayed as asterisks for security purposes. After pressing , the web browser will ask the Administrator for the new p...

- 29 - www.vivotek.com DDNS “Enable DDNS” This option turns on the DDNS function. “Provider” The provider list contains four hosts that provide DDNS services. Please connect to the service provider’s website to make sure the service charges. “Host Name” If the User wants to use DDNS service, this fi...

- 31 - www.vivotek.com Audio and Video General “Configure for computer viewing” To make quick setting for computer viewing “Configure for mobile viewing” To make quick setting for cell phone viewing Video Settings “Video title” The text string can be displayed on video “Color” Select either for colo...

- 33 - www.vivotek.com <Network Camera> is the domain name or original IP address of the Network Camera. Image Settings Click on this button to pop up another window to tune “Brightness”, “Contrast”, “Hue” and “Saturation” for video compensation. Each field has eleven levels ranged from -5 to ...

- 33 - www.vivotek.com <Network Camera> is the domain name or original IP address of the Network Camera. Image Settings Click on this button to pop up another window to tune “Brightness”, “Contrast”, “Hue” and “Saturation” for video compensation. Each field has eleven levels ranged from -5 to ...

- 35 - www.vivotek.com “FTP server port” This can be other than the default port 21. The user can change this value from 1025 to 65535. “User name” Granted user name on the external FTP server. “Password” Granted password on the external FTP server. “Remote folder name” Granted folder on the externa...

- 37 - www.vivotek.com Application settings The server provides two kinds of applications, snapshot and videoclip. There are two independent snapshot items to set, and they are named as Snapshot #1 and Snapshot #2. The status, schedule, trigger condition, and action of three applications are summari...

- 43 - www.vivotek.com Maintenance Three actions can be selected “reboot” click the reboot button to restart system “factory default” Click on Factory default button on the configuration page to restore the factory default settings. Any changes made so far will be lost and the system will be reset t...

- 45 - www.vivotek.com B. URL commands of the Network Camera For some customers who already have their own web site or web control application, the Network Camera can be easily integrated through convenient URLs. This section lists the commands in URL format corresponding to the basic functions of t...

- 47 - www.vivotek.com (note: The return page can be a general HTMLfile(.htm, .html) or a Vivotek server script executable(.vspx) file. It can not be a CGI command. It can nothave any extra parameters. This parameter must beput at end of parameter list) Return: HTTP/1.0 200 OK\r\n Content-Type: text...

- 57 - www.vivotek.com NAME VALUE DESCRIPTION enable(r/w) 0, 1 Enable or disable the UPNP presentationservice. <1> Group: UPNPfor NAME VALUE DESCRIPTION enable(r/w) 0, 1 Enable or disable the UPNP port forwardingservice. <0> Group: App NAME VALUE DESCRIPTION scriptname (r) <text strin...

- 59 - www.vivotek.com Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <length>\r\n\r\n<depends on method value> If(method == get || method == set) { tue=<value>\r\n wed=<value>\r\n … }Else if(method == normal) { Application page contents } parameter ...

- 61 - www.vivotek.com Account management Note: This request requires administrator privilege Method: GET/POST Syntax: http://< servername >/cgi-bin/admin/editaccount.cgi ? method=<value>&username=<name>[&userpass=<value>][&privilege=<value>][&privilege=...

- 63 - www.vivotek.com http://< servername >/cgi-bin/admin/configfile.cgi Server will return the up-to-date configuration file. Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: <configuration file length>\r\n \r\n<configuration data>\r\n Upgrade firmware Not...

Technology License Notice MPEG-4 AAC Technology THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS PRODUCT MAY NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT REGARD TO PC SOFTWARE, YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES. FOR MORE INFORMATION, PLEASE REFER TO ...