Page 2 - INDEX
INDEX 1 IMPORTANT INFORMATION............................................................2 1. WARNING.......................................................................................2 2. SAFETY GUIDELINES...................................................................3 3 . I M P O RTA N T S...
Page 3 - CAUTION; IMPORTANT INFORMATION
2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN COUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrow-head symbol,within an quilateral triangle, is intended to alert ...
Page 4 - English; This device must be operated with the original power supply.; Always use the appropriate AC cord that is certi; IMPORTANT NOTICE CONCERNING POWER CORD SELECTION; •For the United States and Canada; fl; •FCC Compliance Statement; FCC Warning
3 English WARNING: This device must be operated with the original power supply. CAUTION: The power supply outlet should be located near the LCD TV and should be easily accessible. Always use the appropriate AC cord that is certi fi ed for your speci fi c country. Some examples are listed below: USA....
Page 5 - •Overloading; re or electronic shock.; •Power Cord Protection; IMPORTANT SAFETY INSTRUCTIONS
4 Follow and obey all warnings and instructions marked on the LCD TV. For your safety, please read all the safety and operating instructions before you operate the LCD TV. Keep this user’s manual for future reference. (1) Read these instructions.(2) Keep these instructions.(3) Heed all warnings.(4) ...
Page 6 - •Other Notices; WARNING
5 English •Other Notices ・ Avoid exposing the LCD TV to direct sunlight or high temperatures. ・ Avoid exposing the LCD TV to moisture or high humidity ・ Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairsb by anyone not authorized by Vivitek. ・ If your LCD TV w...
Page 7 - MAKE SURE THE LCD TV IS TURNED OFF AND POWER CORD IS; CLEANING THE LCD TV; •Outdoor Antenna Grounding
6 •Lightning •Power Lines •To clean the screen: 1.Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.2.If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. •To ...
Page 8 - -1 On handling discs; Playback side
7 English IMPORTANT INFORMATION 6. DISC 6-1 On handling discs • Be sure to hold the edge of disc. Do not touch the surface of the disc.• Do not attach paper or tape to discs. 6-2 On cleaning discs • Wipe the disc with a clean, dry cloth from the center outward toward the edges.• Do not wipe the disc...
Page 9 - -5 Region management information; Video CDs and Audio CDs are divided into tracks.; -7 Notes on copyright; Title 1
8 IMPORTANT INFORMATION 6-5 Region management information The region number of this unit is 1. If region numbers, which stand for their playable area, are printed on your DVD video disc and you do not fi nd " 1 " or " ALL " , disc playback will not be allowed by the player. (In this ...
Page 10 - Remote Control x1 (with 2 pcs AAA batteries); PREPARATION
9 English 1. PACKAGE CONTENTS 26"/32” LCD TV/DVD COMBINATION Remote Control x1 (with 2 pcs AAA batteries) User manual x1 Power cord x1 Quick Connect Guide x1 Warranty card x1 User manual PREPARATION Quick Connect Guide Warranty card
Page 11 - Select Active Video Input or choose a selection while in the MENU.
10 2. TV CONTROLS PREPARATION 1. MENU Turn the Menu ON/OFF 2. VOL + / - Adjust (VOL + / -) sound volume or adjust a highlighted control while in the Menu. 3. CH + / - Adjust (CH + / -) channel when input is TV or adjust a highlight control while in the Menu. 4. INPUT Select Active Video Input or cho...
Page 12 - Connect an external audio source to this jack.; SPDIF Audio Output
11 English 3. TERMINALS PREPARATION 9 1 2 3 4 5 6 7 8 1 3 1 5 1 6 1 4 11 1 2 1 2 1 0 1. VGA Audio IN C o n n e c t t o t h e A u d i o o u t ( G r e e n ) f r o m a computer. 2. VGA U s i n g a 1 5 - p i n V G A c a b l e , c o n n e c t t o a computer or other device with a VGA output. 3. YPbPr1 In...
Page 13 - Remote Control
12 4. REMOTE CONTROL PREPARATION ► Note: Before setting up favorite channel, please make sure channel list is saved in TV. If not, perform channel scan to save a channel list in TV. Remote Control 1.POWER Switch TV power On/Off. 2.Mute Mutes the sound. 3.DVD Eject Eject the DVD disc. 4.PC Select VGA...
Page 15 - INSERT BATTERIES IN THE REMOTE CONTROL; re; TRANSMISSION RANGE OF REMOTE CONTROL; INSTALLATION
14 1. INSERT BATTERIES IN THE REMOTE CONTROL (1) Remove the battery cover. (2) Insert the batteries corresponding to the (+) and ( − ) marks on the battery compartment. (3) Re-attach the battery cover. Transmission range depends upon the receive angle, the remote angle coverage is 25° Left/Right, 20...
Page 16 - -1 Outdoor Antenna Connection; 5-ohm coaxial cable; descrambler by using the converter's channel keys.; ANTENNA CONNECTION
15 English 2-1 Outdoor Antenna Connection ► Notice: F-type connector should be fi nger-tightened only. When connecting the RF cable to the TV set, do not tighten F-type connector with tools.If tools are used, it may cause damage to your TV set.(The breaking of internal circuit, etc.) F-type connecto...
Page 17 - EXTERNAL DEVICE CONNECTIONS; rst to prevent any possible; IMPORTANT: Before connect, make sure all devices are turned off.
16 3. EXTERNAL DEVICE CONNECTIONS You can enjoy picture and sound by connecting a DVD or video game system to the terminals located on the rear of the LCD T V set.When connecting an external device, turn of f the power of the LCD T V set fi rst to prevent any possible damage. Note: 100 ~130 VAC IMPO...
Page 18 - may result in a malfunction.; Outputting Audio
17 English VCR Camcorder * If your external device has an S-video terminal, S-VIDEO connection is recommended. Home video game system Video Audio (L) Audio (R) S-Video S-Video cable Audio/Video cable Audio amplifier AUDIO OUTPUTterminal AUDIO OUT Audio (R) Audio (L) Audio/Video cable Cable system or...
Page 19 - When you setup the LCD TV for the
18 Connect the power cord to the DVD combo LCD TV then to a proper AC outlet. IMPORTANT: The power input voltage is 120VAC, 60 Hz ONLY, Before beginning, make sure all devices are turned off. 4. POWER CONNECTION INSTALLATION Power 5. INITIAL SETUP When you setup the LCD TV for the fi rst time or Res...
Page 20 - Press ENTER to access Time Zone settings.; ENTER; to access Daylight Saving screen.; Setup Wizard
19 English INSTALLATION (1) Press " ▲ / ▼ " to select the language for menu and message showing on your TV, press Enter key to exit Setup Wizard menu. (2) Press ENTER to access Time Zone settings. Press " / " to select on your time zone. (3) Press ENTER to access Daylight Saving scre...
Page 21 - to access RF Input Source screen.; to start the Channel Scan.
20 INSTALLATION (4) Press ENTER to access RF Input Source screen. Press " / " to select the source for your TV signal. ► Note: Select STD(Standard) for majority of cable systems. (5) Press ENTER to start the Channel Scan. Scanning channel searches available digital (HDTV) and analog (SDTV) c...
Page 22 - BASIC OPERATION; TURNING ON AND OFF THE POWER
21 English BASIC OPERATION 1.TURNING ON AND OFF THE POWER POWER indicator Power ON Lighting (Blue) Power OFF Light Off • Turning On the Power Press on the TV or on the remote control. ・ POWER indicator (Blue): The TV is on. • Turning Off the Power Press on the TV or on the remote control. ・ The TV ...
Page 23 - You can select channels using; Channel Select; or; Using LAST; Press again to switch back to the currently tuned channel.; on Remote Control directly.; Last
22 3.CHANGING CHANNELS ・ You can select channels using Channel Select (0-9, • (DOT), ENT) or CH (+)/(-) . • Using Channel Select (0-9, • (DOT), ENT) When selecting the channel using Channel Select, complete input of the channel number by holding down the button for the last digit for a moment. •To s...
Page 24 - Enter; SELECTING MENU ITEMS; •Using the remote control; MENU
23 English 1. Press on the remote control to display the Menu screen. 2. Press ▲ / ▼ to select the desired menu item. 3. Press Enter to select the menu item. 4. Press to exit. 5.SELECTING MENU ITEMS The menus can be used to adjust the various settings of the LCD TV set. Select the desired menu item ...
Page 25 - •Menu Setting screens; MENU OPERATION
24 •Menu Setting screens For details of each menu item, refer to the page number indicated below. MENU OPERATION Video PageRating Locks.......................................38C h a n n e l L o c k s . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0Front Panel Lock..........................40C...
Page 26 - EXIT
25 English MENU OPERATION 1. VIDEO •You can adjust the Video to your preference with the following Video settings. 1.Press MENU on the remote control to display the menu screen. 2.Press ► / ▲ / ▼ to select the Video menu. 3.Press Enter to enter the Video meun list. 4.Press ▲ / ▼ to select the desire...
Page 27 - Selected Item
26 1-2 Video Settings: The Video Settings sub-menu allows adjustments to display settings such as brightness, contrast, saturation, hue, sharpness and backlight level. Menu options may vary depending on the input source. MENU OPERATION 1-1 Preset Mode: Upon the watching program, you can select an ap...
Page 29 - Resolution
28 MENU OPERATION 1-5 VGA Setting: Adjust VGA Setting of your TV (Horizontal, Vertical, Phase, Auto Sync). ► Note: •Make sure to select the input signal from the following PC Compatibility Chart before a PC. Selected Item ◄ button ► button Horizontal Move the image Horizontal position to the left. M...
Page 30 - Reset all Video sub-menu options to the factory defaults.
29 English MENU OPERATION 1-6 Video Reset : Reset all Video sub-menu options to the factory defaults. 2. AUDIO 2-1 Bass, Treble & Balance: Use ▲ / ▼ / ◄ / ► to select or adjust your favorite bass, treble and balance settings.
Page 31 - Select surround audio format
30 2-3 Analog Preference: The Analog Preference sub-menu sets the audio output to the desired listening preference. The available settings are Mono (single stream), Stereo (left and right stream) and SAP (Secondary Audio Programming such as a foreign language track). MENU OPERATION 2-2 Optical out (...
Page 33 - Reset all Audio sub-menu options to the factory defaults.
32 2-7 Reset Audio Reset all Audio sub-menu options to the factory defaults. MENU OPERATION 2-6 Audio Only. Audio Only is a listening mode by turning off the LCD backlight and allowing the current input’s audio to remain “on” for listening. You can enable Audio Only mode from OSD menu. On: enable Au...
Page 34 - The Channel List sub-menu de
33 English 3. CHANNELS 3-1 Channel List The Channel List sub-menu de fi nes which channels are available for viewing when utilizing the analog/digital tuner. Selected Item Description Check All Select all channels from Master Channel List Uncheck All Unselect all channels from Master Channel List An...
Page 35 - button on the remote control to
34 3-2 Favorites The Favorites sub-menu adds or subtracts channels from the favorite channels list. Channels added to the list can be accessed by pressing the FAV A,FAV B or FAV C button on the remote control instead of directly entering the channel number. The following sub-menu items allow for mod...
Page 36 - Stop Scan
35 English 3-3 Scan Channels The Scan Channels sub-menu automatically scans for available channels based upon the source input selected. If scanning for OTA (over the air) channels, select Antenna as the input source. If scanning for Cable channels, select Cable as the input source After selecting t...
Page 37 - The Find Channel sub-menu allows for manual addition of user speci; -5 Edit Channel Name; button to modify the desired channel name.
36 3-4 Find Channel The Find Channel sub-menu allows for manual addition of user speci fi ed channels. 3-5 Edit Channel Name The Channel Name Edit sub-menu allows for modification of the friendly name of any channel within the channels list. To modify a channel name, select the Channel Name Edit sub...
Page 41 - -3 Front Panel Lock
40 4-2 Channel Locks The Channel Locks sub-menu provides individual channel blocking regardless of any ratings lock in place. 4-4 Change PIN The Change PIN sub-menu allows the user to set up a new PIN. The original PIN is required to make any change. MENU OPERATION 4-3 Front Panel Lock This importan...
Page 43 - Set the current time and date.
42 MENU OPERATION 5. SETTINGS 5-1 Menu Language The Menu Language sub-menu toggles the default language for the on-screen display menus. 5-2 Date & Time Set the current time and date. 1.Press ► to set the current time and date on TV.
Page 44 - to cancel the check.; to adjust the “Today’s Date”.; to exit after; to adjust the “Current Time”.
43 English MENU OPERATION 2. Press ▲ to select “Auto-Update Time”. 3.Press ENTER to cancel the check. Note:When you check the “Auto-Update Time”, you cannot adjust the date and time. 4. Press ▲ to select “Today’s Date”. 5. Press ENTER to adjust the “Today’s Date”. 6. Press ▲ / ▼ or number key (0-9) ...
Page 48 - The Basic Selection sub-menu con
47 English 5-5-2 Basic Selection The Basic Selection sub-menu con fi gures the video frame fi eld setting for closed captioning content. Most closed caption content can be found within CC1. 5-5-3 Advanced Selection The Advanced Selection sub-menu provides enhanced closed caption options for the CC e...
Page 49 - Reset all Closed Caption settings to the factory defaults.; The Input Labels sub-menu allows for modi
48 5-5-6 Reset CC Reset all Closed Caption settings to the factory defaults. MENU OPERATION 5-6 Input labels The Input Labels sub-menu allows for modi fi cation of the friendly name for the input port list. To modify an input port label, select the Input Labels sub-menu, scroll through the list of a...
Page 50 - -8 Power Management
49 English 5-8 Power Management The Power Management sub-menu con fi gures the power state of the LCD-TV when turned off. Selected Item Description Normal The TV into a low power standby state. And the TV can be turned on quickly. Energy Saving The TV turns off all power. And the TV must be fully bo...
Page 53 - Detect a; Set Cinemotion to ON; OFF; Set Cinemotion to OFF
52 MENU OPERATION 6.ADVANCED You can adjust the video to your preference with the following settings. 6-1 Cinemotion Detect a fi lm-based source (originally encoded at 24 frames/second) and then recreate each still fi lm frame to cinematic picture quality (ON, OFF). Selected Item Description ON Set ...
Page 55 - -11 User Color Temp
54 6-5 Brightness Selected Item ◄ button ► button Brightness For less brightness For more brightness 6-6 Contrast Selected Item ◄ button ► button Contrast For less contrast For more contrast MENU OPERATION 6-7 Saturation Selected Item ◄ button ► button Saturation For less color intensity For more co...
Page 56 - Reset Advanced Settings to factory preset values.
55 English The Guide menu displays program information for the current channel such as signal strength, audio/video signal type, channel number, V-Chip support, closed captioning status and program title. ► Note: The Guide menu is only applicable when viewing digital television through the TV tuner....
Page 57 - PLAYING A DISC
56 Power PLAYING A DISC (1) Press POWER on the unit or on the remote control to turn on the unit. ・ Every time you press POWER, the TV/DVD will starts from previous mode. (2) Press DVD on the remote control to select DVD mode. ・ The DVD startup screen will appear on the screen. (If DVD disc has alre...
Page 60 - Limitations on display
59 English MP3/WMA/JPEG CD Playback This TV/DVD can playback the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding Software (not supplied). The Apple-HFS-System cannot be played. ► Note: ...
Page 61 - WMA CD
60 MP3/WMA/JPEG CD Playback Standard, sampling frequency, and the bit rate: MP3 CD MPEG-1 Audio 32kHz, 44.1kHz, 48kHz 32kbps ~ 320 kbps (constant bit rate or variable bit rate) The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit rate....
Page 62 - SPECIFICATIONS; Model Name; cations are subject to change without notice.
61 English SPECIFICATIONS Model Name SK-26H590D Panel Type 26" (26" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix WXGA LCD, 1366 x 768 vertical stripe Color Anti-re fl ective coating < 2% re fl ection Viewing Angles 160° (H) / 150° (V) Input Signal Video/Audio VGA Ana...
Page 64 - TROUBLESHOOTING; •No Power
63 English TROUBLESHOOTING •No Power ・ Make sure power button is ON (Blue LED). ・ Make sure AC power cord is securely connected to the AC socket. ・ Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage. •Parental Control Passwo...
Page 65 - APPENDIX; APPENDIX A: Remove the base; on it for avoiding any scratch or damage.
64 APPENDIX APPENDIX A: Remove the base Step-1 To lay the front bezel down on a soft and clear area, and please be sure that there is no any foreign object on it for avoiding any scratch or damage. Step-2 Remove the four screws as shown in thefollowing illustration. Step-3 Remove the base from LCD T...
