Page 2 - Contents
1 Contents Introduction ..................................................................................................................................................... 2 What Your Camera Includes .....................................................................................................
Page 4 - Camera Technical Specifications
3 Camera Technical Specifications Image Sensor CMOS Sensor Image Resolution 4000x3000(12M),3264x2448(8M); 2592x1944(5M);2048x1536(3M); 640x480(VGA) Video Resolution 640X480 pixels , 320X240 pixels File Format JPEG/AVI Internal Memory 32MB External Memory SD Card (up to 32GB) LCD Display 2.4 Inch TFT...
Page 6 - A Quick Look at your Digital Camera
5 A Quick Look at your Digital Camera 1. Strap Hole 2. Battery Cover 3. Shutter Button 4. Power Button 5. Lens 6. Flash Strobe 7. LCD Screen 8. Busy / Power Indicator LED 9. T / Zoom In Button 10. W / Zoom Out Button 11. Charger Indicator LED 12. Playback Button 13. Up / Display Button 14. Right / F...
Page 7 - Charging the Lithium Battery
6 Charging the Lithium Battery Only use the Lithium Battery that is included in the packaging. To charge the Lithium Battery insert the battery into the camera in the direction as shown. Insert the battery with the positive (+) and negative (-) poles matching the directions indicated inside the batt...
Page 8 - Initial Camera Setup; Powering the Camera ON
7 Initial Camera Setup When powering the camera ON for the first time the camera will take you through the initial camera setup. Powering the Camera ON 1) Make sure the battery is fully charged before the first use. 2) Make sure an SD card has been inserted into your camera. 3) Make sure the battery...
Page 9 - Setting the Camera Language
8 Setting the Camera Language 1) You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice and press the OK button to confirm the selection. 2) After selecting a language, you will be asked if you would like to continu...
Page 10 - Using Your Digital Camera; Powering the camera ON; Changing Camera Mode
9 Using Your Digital Camera Make sure the batteriy is fully charged before the first use. Powering the camera ON Press the Power button to turn your camera ON. The camera will be in Photo Capture mode to start. Powering the camera OFF While the camera is on, you can press the Power button again at a...
Page 12 - Navigating the Menus; Photo Capture Mode; Taking a Picture
11 Navigating the Menus Each camera mode has a set of menus specific to that mode. Press the MENU button to open the menus for the current mode. 1) Press the LEFT or RIGHT direction control buttons to scroll between the various menus for the current mode. 2) Press the UP or DOWN direction control bu...
Page 14 - Flash Options
13 Flash Options There are several Flash options available on your camera. The options appear on the Photo Capture Mode LCD screen in the sequence. To change the Flash mode, press the Right Quick Function button until you arrive at your desired settings. A Forced Off (Default) Red Eye Auto Flash For...
Page 15 - Photo Capture Mode Menus
14 Photo Capture Mode Menus The following are the menus that appear in your camera‟s Photo Capture Mode:
Page 16 - Scene Menu
15 Scene Menu The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current environment.
Page 17 - Image Resolution Menu
16 1) Press the UP or DOWN direction control buttons to scroll through the menu options. 2) Press the OK button to select the desired option. 3) A selected option icon will appear on the selected item. 4) Press the LEFT or RIGHT button to select the next menu item. 5) Press the MENU button to exit t...
Page 18 - Image Quality Menu
17 5) Press the MENU button to exit the menu and return to your previous mode. 6) An icon reflecting your selection will display on the LCD screen. 7) Remember that this setting will be remembered by your camera until you manually change the setting or restore the camera‟s default factory settings. ...
Page 20 - White Balance Menu
19 Anti-Shake Menu The Anti-Shake feature reduces image corruption that can be caused by movement of the camera while capturing the image. 1) Press the UP or DOWN direction control buttons to scroll through the menu options. 2) Press the OK button to select the desired option. 3) A selected option i...
Page 21 - Color Effect Menu
20 1) Press the UP or DOWN direction control buttons to scroll through the menu options. 2) Press the OK button to select the desired option. 3) A selected option icon will appear on the selected item. 4) Press the LEFT or RIGHT button to select the next menu item. 5) Press the MENU button to exit t...
Page 22 - Multi-Snapshots Menu
21 5) Press the MENU button to exit the menu and return to your previous mode. 6) Remember that this setting will be remembered by your camera until you manually change the setting or restore the camera‟s default factory settings. Multi-Snapshots Menu When enabled, the Multi-Snapshots feature allows...
Page 25 - Metering Menu
24 Metering Menu The Metering setting will affect how your camera focuses when capturing an image. Depending on your selection, the camera will be more sensitive to focusing on particular areas in the display and adjust the image color and lighting accordingly. Center – Averages the light metered fr...
Page 26 - Language Menu
25 Language Menu You can select your camera‟s language setting by selecting the desired language from the Language menu. 1) Press the UP or DOWN direction control buttons to scroll through the menu options. 2) Press the OK button to select the desired option. 3) A selected option icon will appear on...
Page 29 - Frequency Menu
28 1) Press the UP or DOWN direction control buttons to scroll through the menu options. 2) Press the OK button to select the desired option. 3) A selected option icon will appear on the selected item. 4) Press the LEFT or RIGHT button to select the next menu item. 5) Press the MENU button to exit t...
Page 30 - Format Memory Card Menu
29 5) Press the MENU button to exit the menu and return to your previous mode. 6) Remember that this setting will be remembered by your camera until you manually change the setting or restore the camera‟s default factory settings. Format Memory Card Menu You can use the Format Memory Card menu to de...
Page 31 - Factory Settings Menu; Photo Playback Mode
30 7) A message will appear confirming that your memory card has been formatted clean. Factory Settings Menu Use this menu to view the Firmware version on your camera or to reset your camera settings to the factory default settings. 1) The “Default Setting” is selected. 2) Press the OK button to res...
Page 33 - Photo Playback Mode Menus
32 1) Press the W/Zoom Out button 2) All the images on your camera will appear in the Thumbnail View. 3) Use the direction buttons to scroll and select the image you wish to view. 4) Press the SET button to enlarge the image full size Photo Playback Mode Menus The following are the menus that appear...
Page 34 - Rotate Menu
33 Rotate Menu Use this menu to rotate the pictures that you‟ve taken with your camera. 1) Press the UP or DOWN direction control buttons to scroll through the menu options. 2) Press the OK button to select the desired option. 3) The selected picture will now appear rotated in the Playback mode. 4) ...
Page 36 - Slide Show Menu
35 You can use the Print Photos menu to print the photos that are on your camera directly to a Pictbridge compatible printer. 1) Scroll through your pictures and find the one you would like to print. 2) Open the Print Photos menu. 3) Press the UP or DOWN direction control buttons to scroll through t...
Page 37 - Video Capture Mode; Taking a Video
36 3) A selected option icon will appear on the selected item. 4) The Slide Show will begin to play. 5) Press the MENU button to exit the Slide Show and return to your previous mode. Video Capture Mode The Video Capture Mode allows you to capture videos with your digital camera. When the camera is f...
Page 38 - Video Capture Mode Menus
37 Video Capture Mode Menus The following are the menus that appear in your camera‟s Video Capture Mode:
Page 44 - Image Sharpness Menu
43 3) A selected option icon will appear on the selected item. 4) Press the LEFT or RIGHT button to select the next menu item. 5) Press the MENU button to exit the menu and return to your previous mode. 6) An icon reflecting your selection will display on the LCD screen 7) Remember that this setting...
Page 45 - Light Exposure Menu
44 7) Remember that this setting will be remembered by your camera until you manually change the setting or restore the camera‟s default factory settings. Light Exposure Menu The Light Exposure setting helps you control the amount of light that enters your camera‟s lens. This setting should be adjus...
Page 49 - Audio Menu
48 1) Highlight the “Date Setup” menu option. 2) Press the OK button to select the desired option. 3) The Date Setup submenu will open 4) Scroll through the window with the right and left navigation buttons. For each field in the menu, use the up and down navigation buttons to set the time and date....
Page 53 - Video Playback Mode; Playing Videos on Your Camera
52 4) Press the UP or DOWN buttons to select “Yes” and press the OK button to begin the format. 5) The camera will be reset. 6) A message will appear indicating that the settings have been reset successfully. Video Playback Mode When you first turn on the camera, the camera will be in Photo Capture ...
Page 54 - Quick Delete; Video Playback Mode Menus
53 Quick Delete Select the image that you wish to delete and press the Delete button. 1) A “Delete Current” message will appear on the LCD with „Yes‟ and „No‟ options. 2) Press the LEFT or RIGHT button so to select you choice. 3) Press the OK button . Video Playback Mode Menus The following are the ...
Page 55 - Delete Menu
54 1) Press the UP or DOWN direction control buttons to scroll through the menu options. 2) Press the OK button to select the desired option. 3) Press the MENU button to exit the menu and return to your previous mode. 4) Any image that is locked will display a lock symbol on the LCD screen when view...
Page 56 - TV Out Function to Connect the Camera to a TV; Installing the Software
55 TV Out Function to Connect the Camera to a TV The camera has an AV port to use your larger TV screen in place of the camera`s LCD screen. On plugging the TV-out cable (supplied) to the cameras AV out jack, the LCD screen will turns blank. Use the camera as you would to capture and playback photos...
Page 59 - Connecting the Camera to the Computer
58 9) Please review the license terms. On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue. 10) On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the program will be installed, and then click “Insta...
Page 60 - Getting Photos and Videos from Your Camera to Your Computer
59 3) The first time you connect the device to the computer you will have to wait a few seconds until the computer recognizes the device. Getting Photos and Videos from Your Camera to Your Computer An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the...
Page 63 - Camera Maintenance
62 Transfer media from my camera to my computer manually (Using Macintosh) 1) Use the USB cable that came with your camera to connect your camera to your computer. 2) MSDC appear on the LCD. 3) The camera‟s device icon appears on the desktop. 4) Click on the device icon and open the DCIM folder and ...
Page 64 - Sakar Warranty Card
63 Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year. What Is Not C...
Page 65 - Technical Support
64 Sakar US Sakar International Attention: Service Department 195 Carter Drive Edison, NJ 08817 Sakar UK/Europe Attention: Service Department 2D, Siskin Parkway East 4020 Middlemarch Business Park Coventry, CV3 4PE Sakar Australia Return faulty camera to the Refund Counter at the store where purchas...
Page 66 - Troubleshooting
65 Troubleshooting Q: I have taken photos and selected the “Get Images” button. I get a message that the images were successfully transferred but the photos do not appear on my computer. What do I do? First ensure that you have in fact taken photos. Press the Shutter button to take some sample photo...
