Page 2 - Table of Contents
Table of Contents Introduction ........................................................................................................................................................ 2 Key Features ......................................................................................................
Page 5 - Computer System Requirements for Macintosh; Power Macintosh G3 500 MHz or higher
Computer System Requirements for Macintosh y Power Macintosh G3 500 MHz or higher y Mac OS X version 10.2.6 or later y 128 MB or more available system RAM (256 MB recommended), 150 MB free disk space y 800 x 600 or higher-resolution monitor displaying millions of colors Note: This hardware is plug a...
Page 6 - A Quick Look at Your Camera
Page 7 - Preparing Your Camera for Use; Install lithium battery; packaging. To install it correctly see the diagram below:
Preparing Your Camera for Use Install lithium battery Your digital camera needs a lithium battery in order to operate. The battery is found separately in the packaging. To install it correctly see the diagram below: 1. Slide and open the battery door. 2. Insert the battery correctly with the correct...
Page 8 - Charge lithium battery; Please charge the battery as below 2 methods:; be off when charge full.; B. Charge with supplied charger; Installing SD Memory Card; photos and videos to your PC. Install the SD memory card as below:
loses power and turns off or when the battery door is opened to replace the battery. Charge lithium battery Please charge the battery as below 2 methods: A. Charge with USB cable Insert the lithium battery into your camera correctly, and connect your camera to computer with USB cable. The red LED of...
Page 9 - The image will be deleted when camera power is
3. Push the card in until you feel it “click” into position. The top of the card should be flushed with the surface of the camera. An icon will appear on the LCD screen after you turn on your camera. 4. Once the external memory card is inserted into the camera all the images taken with the camera wi...
Page 10 - from it in order to continue using your camera; Starting Your Digital Camera; Power on; indicates your camera is turned on and ready for use.; Power off; the LCD screen are displayed below:
5. Don’t remove the SD card during formatting as this may damage the card and render it unusable. 6. When your card is full, download the media on the SD card to your PC and delete the photos and videos from it in order to continue using your camera Starting Your Digital Camera Power on Press the Po...
Page 11 - Mode selection; The Still Image mode is for you to take still photos.
Mode selection Your digital touch screen camera has 4 main modes – Still Image mode, Video mode, Playback mode and Set up mode. The Still Image mode is for you to take still photos. You can shoot video files while in Video mode. In Playback mode you can preview photos and videos as well as being abl...
Page 14 - Flash
For close up shooting slide the switch to the position. The icon appears on the LCD screen and indicates that the macro shooting mode is on. For far shooting slide the Macro/Far switch to the position. The icon appears on the LCD screen, to indicate that the far shooting mode is on. Flash In low lig...
Page 15 - LCD screen displaying
4. To turn off the flash function touch the icon function area repeatedly until the icon appears. LCD screen displaying You can touch the “DIS” function area on the screen repeatedly to hide or show the icons of the LCD screen. Self-Timer You can include yourself in a photo by using this feature to ...
Page 16 - Scene
seconds or 10 seconds . 5. Press the Menu/OK button to confirm. The self-timer icon (per your selection) will now appear on the screen. 6. Press the Shutter button to start the self-timer. Your camera will count down 2, 5 or 10 seconds as per your choice and then automatically take the photo. Scene ...
Page 17 - Image Size
4. Touch the icon function area to select the scene you want to use. 5. Press the Menu/OK button to confirm, save and exit to the camera standby mode. Image Size The image size and quality settings determine the number of photos that can be saved and the amount of memory required for each photo. The...
Page 20 - Exposure
2. Touch the icon function area to enter the Setup Menu. Exposure This setting allows you to control the brightness of your images. 1. Touch the first icon function area to enter the “Exposure” option. 2. Touch the icon function area to select an exposure value (from +3 to -3). 3. Press the Menu/OK ...
Page 22 - Quality
2. Touch the icon function area to enter the Sharpness setting. 3. Touch the icon function area to select one of Normal/Soft/Sharp. 4. Press the Menu/OK button to confirm, save and exit to the camera standby mode. Quality The quality of your photos also affects the number of shots you can take. A HI...
Page 24 - Format
3. Press Menu/OK button to confirm and save the changes. Format This function will format the memory card and will erase all files in memory including files that have been protected. Important: Please use this function with caution. Once formatted all the images stored in the memory will be erase. T...
Page 25 - Default Setting; Video Mode
7. Press the Menu/OK button to confirm, save and exit to the camera standby mode. 8. If you selected Yes, all the images sitting on the card will have been erased. Default Setting You can restore your camera to the original factory settings. function area repeatedly until you see the “Default Settin...
Page 27 - Playback Mode
2. Touch the “WB” area to enter the White Balance menu. 3. Touch the icon function area to select the best white balance for shooting. 4. Press the Menu/OK button to confirm, save and exit to the video standby mode. Image Size Your camera supports 2 video resolutions- 640x480 (VGA) pixels, 320x240 (...
Page 31 - Delete
3. Touch the icon function area to enter the Protect menu. 4. Touch the icon function area to select Lock or Unlock. 5. Press the Menu/OK button to confirm. 6. An icon will appear on the screen. Note: To “Unlock” the current file follow steps 1 through 4. Select “Unlock” and press the Menu/OK button...
Page 32 - Crop Image
Note: you cannot delete the file which is locked. Crop Image Crop your photos to show and save a specific portion of an image or to highlight certain focal points. The Crop feature lets you zoom in on an image and then save that part of the image as a new photo. 1. Press the Menu/OK button. 2. Touch...
Page 33 - Pictbridge
new file. 7. Press the Menu/OK button. 8. Touch the , , or icon function area to move the rectangle over and select the part of the photo that you would like to crop. 9. Press the Shutter button. 10. Press the Shutter button again to confirm and save it as a new photo or you can press the Menu/OK bu...
Page 34 - Playing the AVI video file
3. Touch the icon function area until you see the Pictbridge option. icon function area to enter the menu. 4. Touch the 5. Touch the icon function area to select Pictbridge. 6. From the Print message that appears select Print or Cancel 7. Press the Menu/OK button to confirm. “Please connect to devic...
Page 35 - Installing PhoTags Express Software; of the camera software and drivers.; camera, you need to install the CD installation disk.; HAS BEEN COMPLETELY INSTALLED.; For more installation information click the “Read Me First!” button.
3. Press the Shutter button to play the current AVI file. 4. Touch the “C” icon function area to stop playing the AVI. Installing PhoTags Express Software NOTE: Before attempting to install the software, make sure that you do not have the camera’s USB cable attached to your computer. This will affec...
Page 36 - Please review the license terms and click the “; I Agree; ” button to continue.
2. On the “PhoTags Express" screen, click the “Next” button. 3. Please review the license terms and click the “ I Agree ” button to continue. 35
Page 39 - Note
If not, then in order to open the application you need to double click on the Photags Express icon on the desktop. 7. The Welcome to Photags Express Product Registration screen will open. This screen will appear each time you open the application until you register. To register your product please c...
Page 40 - Everything you need to get the most from your photos; Plug one end of the USB cable into the USB port of the camera.; Select Photos; ” or “; Add Captions
Everything you need to get the most from your photos The “PhoTags Express” software that is installed on your computer allows you to edit existing photos that you have on your computer as well as the photos that you have captured with your camera. 1. Plug one end of the USB cable into the USB port o...
Page 42 - Download photos and videos to your PC; The Get Photos Wizard opens.
your TV using your DVD player. Add background music to your slideshow. Download photos and videos to your PC Transfer Photos and video images from your camera to your PC using PhoTags Express. Select the “Get Photos” button from the top of the PhoTags Express Main Menu screen. The Get Photos Wizard ...
Page 43 - CUSTOM COPY METHOD; Select the “Custom”
Select the device (removable disk) option in the Active Devices window on the left and then select either the “Custom” or “Express” copy radial button in the Copy methods box. CUSTOM COPY METHOD Select the “Custom” copy radial button. Click the “Next” button. Add Active Captions to your pictures. Yo...
Page 46 - button found on the top right of the screen.; EXPRESS COPY METHOD; Select the; Viewing Videos
All the media – Photos and Videos on your camera are now downloaded to your computer to the selected folder. Open the “Select Photos” mode of Photags Express to view the thumbnails for all the media. You may now use PhoTags Express to edit your photos, create collections and Burn CD`s. To learn more...
Page 47 - Transferring photos and videos to your PC manually; Turn on your camera, Change your Still Image mode to; Playback; and connect your camera to the computer; Download photos directly from windows
The video will begin to play automatically. To replay the video, use the media controls. Once all the Photos and Videos have been downloaded to the computer it is recommended that you delete them from the camera thereby preparing your camera to take more photos and videos. Transferring photos and vi...
Page 48 - Transferring photos and videos to your MAC manually
Choose “copy pictures to a folder on my computer” on the Removable Disk (F:) window. After you click “ OK ”, step by step instructions will appear. Follow the description and click the buttons that are defaulted by the system to finish transferring. Alternatively you can: 1. Click on the START butto...
Page 49 - Sakar Warranty Card; original; Appendix A: Technical Specifications
48 Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired at no charge for parts or labor for a period of one year....
Page 50 - Appendix B: Troubleshooting
Image Sensor CMOS Sensor Image Resolution 3264x2448pixels(8M),3648x2048pixels(7M),2592x1944 pixels(5M), 2048x1536 pixels(3M), 1920x1080 pixels(2M) and 640x480 pixels(VGA). Video Resolution 640X480,320X240pixels File Format JPEG/AVI External Memory SD / MMC Card (up to 8GB) LCD Display 2.4 Inch TFT L...
