Page 2 - Table of Contents
Table of Contents Introduction ........................................................................................................................................................ 2 Key Features ......................................................................................................
Page 5 - A Quick Look at Your Camera
Page 6 - Preparing Your Camera for Use; Battery Installation; Slide and open the battery compartment at the bottom of the camera.
Preparing Your Camera for Use Battery Installation Your camera requires 3 AAA batteries. To insert the batteries into the camera: 1. Slide and open the battery compartment at the bottom of the camera. 2. Please make sure that the batteries are inserted with the correct polarity facing up. 3. Close t...
Page 7 - Installing SD Memory Card; videos to your PC. Install the SD memory card as below:
Note: 1. If you don’t intend to use your camera for an extended period of time, please remove the batteries to avoid battery leakage and corrosion. 2. Please don’t remove the batteries or power off your camera before downloading the testing photo when you have not inserted an SD card. The testing ph...
Page 8 - The image will be deleted when camera power is; internal RAM” will appear on the LCD screen when you remove the card.
3. Push the card in until you feel it “click” into position. The top of the card should be flushed with the surface of the camera. An icon will appear on the LCD screen after you turn on your camera. 4. Once the external memory card is inserted into the camera all the images taken with the camera wi...
Page 9 - Starting Your Camera; Camera Modes; Taking photos
Starting Your Camera Press and hold the Power button to turn on your camera. The LCD screen will light up indicating that your camera is on and ready for use. To power off your camera, press and hold the Power button again for about 3 seconds. Camera Modes Taking photos Power on your camera, the def...
Page 10 - Digital Zoom function
2. Press the Up button again to change from the auto flash to the red-eye reduction flash mode. The icon will appear on the LCD indicating that the red eye reduction function has been activated. 3. Press the Up button once more until you see the icon appear on the LCD screen. This indicates that the...
Page 11 - Change Image Resolution
3. Press the Menu/OK button. 4. Use the Up/Down button to select either: “On” - to activate and turn the anti-shake on. Icon will show on the screen. “Off” - to exit or turn the anti-shake off. Icon will appear on the screen. 5. Press the Menu/OK button to confirm. The Anti-shake icon appears on the...
Page 14 - Video Mode; Note
Video Mode The Video Mode allows you to shoot high quality AVI movies. In order to use this mode an SD memory card required. 1. Insert a SD memory card. 2. Power on your camera. 3. Press the MODE button to select the video mode. The Video icon now appears in the top left corner of the LCD. 4. Press ...
Page 18 - Installing PhoTags Express Software; of the camera software and drivers.; camera, you need to install the CD installation disk.; HAS BEEN COMPLETELY INSTALLED.; click the “Install” button to install the PhoTags Express software.
Installing PhoTags Express Software NOTE: Before attempting to install the software, make sure that you do not have the camera’s USB cable attached to your computer. This will affect the install process and can cause a failed installation of the camera software and drivers. In order to install the S...
Page 19 - Please review the license terms and click the “; I Agree; ” button to continue.
3. Please review the license terms and click the “ I Agree ” button to continue. 4. Let the “PhoTags Express” installer create the folder where the program will be installed to, and then click “Install”. 18
Page 20 - “PhoTags Express” installer finish the installation program.
5. Please wait while the application is being installed on your computer. 6. Once the application has been installed on your computer, click the “Finish” button to let the “PhoTags Express” installer finish the installation program. 19
Page 21 - automatically launch.
If you selected the option for the application to start after pressing the Finish button, the application will automatically launch. If not, then in order to open the application you need to double click on the Photags Express icon on the desktop. 20
Page 22 - Everything you need to get the most from your photos; Plug one end of the USB cable into the USB port of the camera.
7. The Welcome to Photags Express Product Registration screen will open. This screen will appear each time you open the application until you register. To register your product please click the “Register Online” button and fill out the online registration form (This requires an internet connection)....
Page 23 - ” or “; Add Captions
4. If the Camera is off it will automatically be turned on when the USB cable is properly connected. If you have not already opened your application then click the “PhoTags Express” icon that appears on your desktop to open the “PhoTags Express” Software. From the Main Menu screen that appears, sele...
Page 25 - Download photos and videos to your PC; The Get Photos Wizard opens.
Download photos and videos to your PC Transfer Photos and video images from your camera to your PC using PhoTags Express. Select the “Get Photos” button from the top of the PhoTags Express Main Menu screen. The Get Photos Wizard opens. 24
Page 26 - CUSTOM COPY METHOD; Select the “Custom”
Select the device (removable disk) option in the Active Devices window on the left and then select either the “Custom” or “Express” copy radial button in the Copy methods box. CUSTOM COPY METHOD Select the “Custom” copy radial button. Click the “Next” button. Add Active Captions to your pictures. Yo...
Page 28 - button found on the top right of the screen.
All the media – Photos and Videos on your camera are now downloaded to your computer to the selected folder. Open the “Select Photos” mode of Photags Express to view the thumbnails for all the media. You may now use PhoTags Express to edit your photos, create collections and Burn CD`s. To learn more...
Page 29 - EXPRESS COPY METHOD; Select the; Viewing Videos
EXPRESS COPY METHOD Select the “Express” copy radial button if you want to have all the images transferred to the PC without the option to select which photos you want to transfer. In this mode you will not see a preview of the images transferred. For more information please refer to the Help Guide ...
Page 30 - Transferring photos and videos to your PC manually; Download photos directly from windows; Choose; “copy pictures to a folder on my computer”; on the; OK; Alternatively you can:
Transferring photos and videos to your PC manually Connect your camera to the computer correctly with USB cable, the screen will be shown a window ( Removable Disk F: ) as below: NOTE: Now you can download the photos and videos to your computer with two methods as below: 1. Download photos directly ...
Page 32 - original
What Is Not Covered By Warranty: Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident. What To Do When Service Is Required: W...
Page 33 - Appendix A: Specifications
Appendix A: Specifications Sensor CMOS sensor Image resolution 5M (2592x1944pixels 4:3), 3M (2048x1536pixels 4:3), 2M (1920x1080pixels 16:9 ), VGA (640x480pixels 4:3) Lens f=7.23mm, F2.8 External memory Support SD card up to 8GB Flash Auto/force on/red eye reduction/off Digital Zoom 8X Self-timer 10...
Page 34 - Appendix B: Troubleshooting; sample photos and then try downloading them again.
Appendix B: Troubleshooting Q : I have taken photos but my computer says, “No photos in camera.” What do I do? A : First ensure that you have in fact taken photos. Press the Shutter/OK button a few times to take some sample photos and then try downloading them again. If you still get a “no photos” e...
Page 35 - prevent unintentional data loss.
34 4. Once your computer is back up, plug the camera into your computer’s USB port. 5. Right-click on the “My Computer” icon. Select properties. If you are running Windows 2000 or XP: click on hardware and then Device Manager. If the camera is installed correctly, there will be a category listed for...
