Page 2 - projector; user’s guide
Page 5 - Table of Contents; Welcome
Xerox DP1011 User’s Guide iv Table of Contents Welcome Precautions Do’s and Don’ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - Precautions
Xerox DP1011 User’s Guide 2 Precautions Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to avoid injury and to maximize the life of your projector. Warning— Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes...
Page 8 - Do’s and Don’ts
Xerox DP1011 User’s Guide 3 Precautions Do’s and Don’ts Do: • Turn off the projector before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the projector is not being used for a long period of time. Don’t: • Block...
Page 9 - What’s in the Box
Xerox DP1011 User’s Guide 4 Precautions What’s in the Box Before proceeding, check the contents of the box. If items are missing or damaged, contact the dealer where you purchased the projector. Projector with lens cap Power Cord Quick Start Card Carrying Case Remote Control Battery VGA Cable Tech S...
Page 11 - Connection Ports
Xerox DP1011 User’s Guide 6 Precautions Connection Ports Power Connector —Plug the power cord into the projector here. VGA Connector —Use the VGA cable that you received with your projector to plug in a computer, HDTV, or component video source. Composite Video Input Connector —Plug in your composit...
Page 12 - Installation; Connecting the Projector
Xerox DP1011 User’s Guide 7 Installation Installation Connecting the Projector 1. Make sure the projector and computer are turned off. 2. Connect one end of the VGA cable to the projector. Connect the other end to the VGA port on the computer. 3. Connect the projector to the other video source(s) wi...
Page 13 - Powering On/Off the Projector; To turn on the projector power
Xerox DP1011 User’s Guide 8 Installation Powering On/Off the Projector To turn on the projector power 1. Remove the lens cap. 2. Make sure that the power cord and the cables from the video sources are securely connected to the projector. 3. Turn on the lamp by pressing the Power button on the contro...
Page 14 - To turn off the projector power; Warning Indicator Lights
Xerox DP1011 User’s Guide 9 Installation To turn off the projector power 1. Press the Power button on the projector or Remote Control to turn off the projector lamp. An on-screen message appears: Power off the lamp? 2. Press the Power button again to confirm. If you don’t press the button again with...
Page 15 - Adjusting the Projected Image; To raise the projector
Xerox DP1011 User’s Guide 10 Installation Adjusting the Projected Image To raise the projector 1. Lift the projector up and press the elevator button. The elevator foot pops out. 2. Press the elevator button and hold it in while raising the projector to the display angle you want, then release the e...
Page 16 - Adjusting the Projector Zoom/Focus; Adjusting Projection Image Size
Xerox DP1011 User’s Guide 11 Installation Adjusting the Projector Zoom/Focus You adjust the focus and zoom in/out with the focus ring and zoom ring on the lens housing. To focus the image, rotate the focus ring until the image is clear. The projector can focus at distances from 3.94 feet to 32.81 fe...
Page 17 - User Controls; Panel Control and Remote Control; Panel Control
Xerox DP1011 User’s Guide 12 User Controls User Controls Panel Control and Remote Control The buttons on the Panel Control and the Remote Control are for controlling the projector’s functions. Panel Control Power/Standby Indicator —Flashes green during power startup; remains steady green when projec...
Page 18 - Remote Control
Xerox DP1011 User’s Guide 13 User Controls Remote Control Transmit Indicator Light —Indicates the infrared signal that is transmitted to, and received by the projector. PiP —Displays the Pip menu of the On-Screen Display (OSD). Source —Selects type of video source: RGB, Component-p, Component-i, S-V...
Page 19 - Displaying Menus and Selecting Items
Xerox DP1011 User’s Guide 14 User Controls On-Screen Display (OSD) Menus The On-Screen Display (OSD) menus provide the options to make image adjustments and change a variety of settings. The projector automatically detects the video source so your selections from the menus will apply to that source....
Page 20 - Choose a Language
Xerox DP1011 User’s Guide 15 User Controls Choose a Language 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Language menu and press the Enter button. The Language menu appears. 3. Use the keys to select the language you want. The Panel Control only has...
Page 21 - Adjust the Projector Image
Xerox DP1011 User’s Guide 16 User Controls Adjust the Projector Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the All Images menu and press the Enter button. The All Images menu appears. 3. Use the keys to select the item you want, and use the keys ...
Page 22 - Adjust the Computer Image
Xerox DP1011 User’s Guide 17 User Controls Adjust the Computer Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Computer Image menu and press the Enter button. The Computer Image menu appears. 3. Use the keys to select the item you want, and use th...
Page 23 - Adjust the Video Image
Xerox DP1011 User’s Guide 18 User Controls Adjust the Video Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Video Image menu and press the Enter button. The Video Image menu appears. 3. Use the keys to select the item you want, and use the keys to...
Page 24 - Projector Management
Xerox DP1011 User’s Guide 19 User Controls Projector Management 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Management menu and press the Enter button. The Management menu appears. 3. Use the keys to select the item you want, and use the keys to adj...
Page 26 - Maintenance; Changing the Lamp; To change the lamp module
Xerox DP1011 User’s Guide 21 Maintenance Maintenance Changing the Lamp The projector’s lamp life is approximately 1500 hours of use. The projector automatically monitors the lamp life. After 1500 hours of use, the projector displays the message: The Lamp has been in use for over 1500 hours. You shou...
Page 28 - Troubleshooting
Xerox DP1011 User’s Guide 23 Maintenance Troubleshooting If you try the troubleshooting procedures described in this section and the problem persists, you may have a malfunctioning projector. Refer to the technical support card that you received with your projector or contact the retailer where you ...
Page 30 - Problem: The image is flickering or otherwise unstable; Problem: Image has vertical flickering bar.
Xerox DP1011 User’s Guide 25 Maintenance Problem: The image is flickering or otherwise unstable Try one of these possible solutions: • On the On-screen display, go to the Computer Mode page and select Tracking. Change the tracking until the image stabilizes. • Change the color setting of your comput...
Page 31 - Problem: Lamp burns out or make a popping sound.
Xerox DP1011 User’s Guide 26 Maintenance Problem: Image is reversed. On the On-screen display, go to the Computer/Video Mode/Management page and select Projection Direction. Change the direction of projection to display the image properly. Problem: Lamp burns out or make a popping sound. When the la...
Page 32 - Xerox DP1011 Projector Specifications
Xerox DP1011 User’s Guide 27 Maintenance Xerox DP1011 Projector Specifications Lamp Valve Single Chip DLP™ (Digital Light Processing) Technology Lamp 120W user-replaceable P_VIP lamp Number of Pixels 1024 pixels (horizontal) by 768 lines (vertical) Displayable Colors 16.7 million colors Projection L...
Page 33 - Setting the Screen Resolution; If you have a Windows PC:; If you have an Apple Macintosh:
Xerox DP1011 User’s Guide 28 Maintenance Setting the Screen Resolution For best viewing on your computer screen, its resolution should be set to 1024 x 768 or less. To reset the screen resolution, follow the steps below, referring to the chart on page 29 for the correct settings for your type of com...
Page 34 - Compatibility Modes—Windows Computers
Xerox DP1011 User’s Guide 29 Maintenance Compatibility Modes—Windows Computers * Compression computer image. Mode Resolution (Analog) V. Frequency (Hz) H. Frequency (Hz) VESA VGA 640 x 350 70 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.9 VESA VGA 640 x 480 60 31.5 VESA VGA 640 x 480 72 ...
Page 35 - Compatibility Modes—Macintosh Computers
Xerox DP1011 User’s Guide 30 Maintenance Compatibility Modes—Macintosh Computers * Compression computer image. Mode Resolution (Analog) V. Frequency (Hz) H. Frequency (Hz) MAC 16”* 832 x 624 74.55 49.725 MAC 19”* 1024 x 768 75 60.24 MAC* 1152 x 670 75.06 68.68 MAC G4 640 x 480 60 31.35 MAC G4 640 x ...
