ViewSonic vx724 - Manual

ViewSonic VX724 3 Copyright Information Copyright © ViewSonic ® Corporation, 2005. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks ofMicrosoft Corporation in the United ...

ViewSonic VX724 4 Getting Started Congratulations on your purchase of a ViewSonic ® LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windows ...

ViewSonic VX724 5 Quick Installation 1. Remove two rear panel covers2. Connect power cord (and AC/DC adapter if required) 3. Connect video cable • Make sure both the LCD display and computer are turned OFF. • Connect the video cable from the LCD display to the computer. Macintosh users: Models older...

ViewSonic VX724 7 Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image andminimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and refresh rate (or vertical frequency; example 60 Hz). Afte...

ViewSonic VX724 8 Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The OSD controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 9. Main Menu with OSD controls Front ...

ViewSonic VX724 10 Main Menu Controls Adjust the menu items shown below by using the up S and down T buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. NOTE...

ViewSonic VX724 14 Other Information Specifications 1 Macintosh computers older than G3 require a ViewSonic ® Macintosh adapter. To order an adapter, contact ViewSonic. LCD Type Color FilterGlass Surface 17” (full 17" viewable diagonal area),TFT (Thin Film Transistor), Active Matrix SXGA LCD,0.2...

ViewSonic VX724 15 Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no...

ViewSonic VX724 16 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = TelephoneF = FAX Email United States www.viewsonic.com/support T= (800) 688 6688F= (909) 468 1202 serv...

ViewSonic VX724 17 Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If further cleaning is requ...

ViewSonic VX724 18 Limited Warranty VIEWSONIC ® LCD DISPLAY What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period.If a product proves to be defective in material or workmanship during the warranty period, ViewSonic wi...