ViewSonic VX510 - Manual - manualsarea.com

Page 2 - Contents; Getting Started

Contents 02 / 09 /0 4 A Product Registration .............................................................. 2For Your Records .................................................................. 2 Getting Started Package Contents ................................................................. 3Preca...

Page 3 - Product Registration; Product disposal at end of product life; For Your Records

Copyright © ViewSonic Corporation, 200 4 . All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic,...

Page 4 - Congratulations on your purchase of a ViewSonic; Package Contents; Your LCD display package includes:; Precautions

Getting Started Congratulations on your purchase of a ViewSonic ® LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windows NT, Windows ‘98, W...

Page 5 - Quick Installation; Connect power cord

Quick Installation 1 Remove two rear panel covers 3 Connect video cable • Make sure both the LCD display and computer are turned OFF • Connect the video cable from the LCD display to the computer Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer an...

Page 6 - Lay the LCD display face down on a towel or blanket.

Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: ViewSonic VX 510 5 1 Disconnect Po...

Page 7 - Using the LCD Display; Setting the Timing Mode; timing mode; OSD and Power Lock Settings; OSD Locked

Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1 024 x 768 ) and refresh rate (or vertical frequency; example 75 Hz). After setting the ti...

Page 8 - Adjusting the Screen Image

Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OnView ® controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 9. Front Control Panel shown below in detail Ma...

Page 9 - Do the following to adjust the screen image:; sappear; The following tips may help you optimize your display:

Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. NOTE: All OnView menus and adjustment screens di sappear automatically after about 30 seconds. 2 To select a control you want to adjust, press ▲ or ▼ to scroll up or down the Main Menu. 3 After the control is ...

Page 10 - Main Menu Controls; Control; Auto Image Adjust; functions are not available for DVI input.

Main Menu Controls Adjust the menu items shown below by using the up ▲ and down ▼ buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion.Press the [2] button to obtain a sharper image. If this function does no...

Page 11 - Color Adjust; sRGB

Color Adjust provides several color adjustment modes: preset color temperatures and RGB which allows you to adjust red ( R ), green ( G ), and blue ( B ) separately. The factory setting for this product is 6500K (6500 Kelvin). 9300K — Adds blue to the screen image for cooler white (used in most offi...

Page 14 - Other Information; Specifications

Other Information 1 Macintosh computers older than G3 require a ViewSonic ® , Macintosh adapter. To order an adapter, contact ViewSonic. Specifications LCD Type Color FilterGlass surface 1 5 " (full 1 5 " viewable diagonal area), TFT (Thin Film Transistor), Active Matrix XGA LCD, 0.2 97 mm p...

Page 15 - Troubleshooting; No power; the outlet is supplying proper voltage.; Power is ON but no screen image; • Press only one button at a time.

Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • Mak...

Page 16 - You will need the product serial number.; Web site

Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. ViewSonic VX 510 1 5 Country/Region Web site T = TelephoneF = FAX Email United States Canada viewsonic.com/suppor t viewsonic.com/suppor t T: (800) ...

Page 17 - Cleaning the LCD Display; • MAKE SURE THE LCD DISPLAY IS TURNED OFF.; Disclaimer

Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-...

Page 18 - Limited Warranty; VIEWSONIC LCD DISPLAY

Limited Warranty VIEWSONIC LCD DISPLAY What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole opti...

Page 19 - Appendix; Safety Guidelines; For the United States and Canada

Appendix Safety Guidelines CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is cer ti- fied for the individual country. Some examples are listed below: IMPO...

Page 20 - CE Conformity for Europe

Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-dential installation. This equip...

Page 21 - ViewSonic Corporation