ViewSonic VX2770SMHLED - Manual

2 Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expos...

3 Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC ofthe European Parliament and the Council on restriction of the use of certain hazardoussubstances in electrical and electronic equipment (RoHS Directive) and is deemed to complyw...

4 Copyright Information Copyright © ViewSonic ® Corporation, 2012. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countrie...

5 Getting Started Congratulations on your purchase of a ViewSonic ® LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows Vista, and Windows 7. Package...

6 Quick Installation 1. Connect AC/DC Adapter to LCD Dis- play, and then plug in power cord to AC outlet. 2. Connect video cable • Make sure both the LCD display and computer are turned OFF • Remove rear panel covers if necessary • Connect the video cable from the LCD display to the computer Macinto...

7 Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image andminimizing eye strain. The timing mode consists of the resolution (example 1920 x 1080) and refresh rate (or vertical frequency; example 60 Hz). After setting the ti...

8 Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The OSD controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 11. Scrolls through menu options and adjusts the disp...

10 Main Menu Controls Adjust the menu items shown below by using the up S and down T buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. NOTE: Auto Image Adjust works with most common video cards. If this ...

15 Other Information Specifications 1 Macintosh computers older than G3 require a ViewSonic ® Macintosh adapter. To order an adapter, contact ViewSonic. 2 Please use the power adaptor from ViewSonic ® or authorized source only. LCD Type Display Size Color FilterGlass Surface TFT (Thin Film Transisto...

16 Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • ...

17 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = TelephoneF = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818NZ= 0800 008 822 [email protected]...

18 Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If the screen still not clean, apply a smal...

19 Limited Warranty VIEWSONIC ® LCD DISPLAY What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSoni...

21 Mexico Limited Warranty VIEWSONIC ® DISPLAY PRODUCTS What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty peri...