ViewSonic VX2000 - Manual - manualsarea.com

Page 2 - Contents

Contents ViewSonic VX2000 1 Product Registration .................................................. 2For Your Records ...................................................... 2 Getting Started ..................................................... 3 Package Contents .......................................

Page 3 - Product Registration

Copyright © ViewSonic Corporation, 2002. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, t...

Page 4 - Getting Started; Package Contents

Getting Started Congratulations on your purchase of a ViewSonic ® LCD Display ® . Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windows NT, Windows ‘98...

Page 5 - Quick Installation

Quick Installation 1 Connect power cord and AC/DC adapter 2 Connect video cable • Make sure both the LCD display and computer are turned OFF • Remove rear panel covers if necessary• Connect the video cable from the LCD display to the computer Macintosh users: Models older than G3 require a Macintosh...

Page 7 - Using the LCD Display; Setting the Timing Mode; timing mode; OSD and Power Lock Settings; OSD Locked

Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1600 x 1200) and refresh rate (or vertical frequency; example 60 Hz). After setting the tim...

Page 8 - Adjusting the Screen Image

Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OnView ® controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 9. Scrolls through menu options and adjusts the...

Page 9 - Do the following to adjust the screen image:; To select a control you want to adjust, press; The following tips may help you optimize your display:

Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. NOTE: All OnView menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2 To select a control you want to adjust, pre...

Page 10 - Main Menu Controls; Control

Main Menu Controls Adjust the menu items shown below by using the up ▲ and down ▼ buttons. Control Explanation Auto Image Adjust sizes and centers the screen image automatically. Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness a...

Page 11 - RGB

Color Adjust provides several color adjustment modes: preset color temperatures and RGB which allows you to adjust red ( R ), green ( G ), and blue ( B ) separately. The factory setting for this product is 6500K (6500 Kelvin). 9300K — Adds blue to the screen image for cooler white (used in most offi...

Page 12 - displays the timing mode (video signal input); Manual Image Adjust Sub-menu; adjusts the width of the screen image.

Information displays the timing mode (video signal input) coming from the graphics card in your computer, the LCD model number, the serial number, and the ViewSonic website URL. See your graphic card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). NOTE...

Page 15 - Other Information; Specifications

Other Information Specifications 1 Macintosh computers older than G3 require a ViewSonic ® Macintosh adapter. To order an adapter, contact ViewSonic “Customer Suppor t” on page 16. LCD Type Color FilterGlass surface 20.1" (full 20.1" viewable diagonal area)Active Matrix UXGA LCDLCD, 0.255 mm...

Page 16 - Troubleshooting; No power; and the power supply is firmly connected to the LCD display; Power is ON but no screen image; • Press only one button at a time.

Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the DC power supply and the power supply is firmly connected to the LCD display ® . • Plug another electrical device (like a radio) into the power outlet to verify that the outlet...

Page 17 - You will need the product serial number.; Web site

Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Web site T = TelephoneF = FAX Email United States Canada viewsonic.com/suppor t viewsonic.com/suppor t T: (800) 688-6688 F: (909) 468...

Page 18 - Cleaning the LCD Display; • MAKE SURE THE LCD DISPLAY IS TURNED OFF.; Disclaimer

Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-...

Page 19 - Limited Warranty; VIEWSONIC LCD DISPLAY

Limited Warranty VIEWSONIC LCD DISPLAY What the warranty covers: ViewSonic ® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole op...

Page 22 - ViewSonic Corporation