Page 2 - Compliance Information; FCC Statement; For Canada; CE Conformity for European Countries
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the follow-ing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired o...
Page 3 - Important Safety Instructions
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’...
Page 4 - Declaration of RoHS2 Compliance
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Direc-tive) and is deemed to comp...
Page 5 - For Your Records; Product disposal at end of product life
Copyright Information Copyright © ViewSonic® Corporation, 2013. All rights reserved.Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.Vi...
Page 6 - Notes on the AC power cord
v Notes on the AC power cord AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your ...
Page 7 - Table of contents
Table of contents vi Introduction ........................................................................................... 1 Projector features ................................................................................................................................... 1 Package contents .....
Page 8 - Introduction; Projector features
1 Introduction Projector features The projector integrates high-performance optical engine projection and a user - friendlydesign to deliver high reliability and ease of use. The projector offers the following features: • Single chip 0.55" Texas Instruments DLP ® technology • PJD5232/PJD5234/PJD...
Page 9 - Package contents
2 Package contents When you unpack the projector, make sure you have all these components: Note • Contact you dealer immediately if any items are missing, appear damaged, or if the unit does not work . • For maximum protection of the product, please save the original shipping carton and packing mate...
Page 10 - Projector overview; Front view
3 Projector overview Front view 1. Front IR remote control sensor 2. Elevator foot 3. Projection lens 4. Focus ring 5. Security bar 6. Speaker 7. Ventilation holes 8. Zoom ring 9. Control panel 10. Lamp cover 2 7 8 9 3 1 5 6 4 10
Page 12 - Using the product; Control panel
5 Using the product Control panel 1. TEMP (Temp LED indicator) Refer to “LED Indicator Messages”. 2. Keystone/Arrow keys ( /Up, /Down) Manually correct distorted images resulting from an angled projection. 3. POWER Turn the projector on or off. 4. POWER (Power LED indicator) Refer to “LED Indicator ...
Page 13 - Connection ports
6 Connection ports 1. AUDIO IN 1 Connect an audio output from the Computer In1 to this jack. 2. S-VIDEO Connect S-Video output from video equipment to this jack. 3. COMPUTER IN 1 Connect image input signal (analog RGB or component) to this jack. 4. COMPUTER OUT Connect to a computer display, etc. 5....
Page 14 - Remote control; Left
7 Remote control 1. Power Turn the projector on or off. 2. VGA1 Display COMPUTER IN 1 signal. 3. Source Display the source selection bar. 4. Keystone/Arrow keys ( /Up, /Down) Manually correct distorted images resulting from an angled projection. 5. Left When the On-Screen Display (OSD) menu is activ...
Page 16 - Using the remote mouse control
9 28. Aspect Select the display aspect ratio. 29. Timer Activate P-Timer OSD menu. Using the remote mouse control The capability of operating your computer with the remote control gives you more flexibility when delivering presentations. 1. Connect the projector to your PC or notebook with a USB cab...
Page 17 - Installing the Batteries
10 Installing the Batteries 1. Open the battery cover in the direction shown. 2. Install batteries as indicated by the diagram inside the compartment. 3. Close the battery cover into position. Caution • Risk of explosion if battery is replaced by an incorrect type. • Dispose of used batteries accord...
Page 18 - Remote control operation
11 Remote control operation Point the remote control at the infrared remote sensor and press a button. • Operating the projector from the front. Note • The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. • Operate t...
Page 19 - Connection
12 Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections.2. Use the correct signal cables for each source.3. Ensure the cables are firmly inserted. Important • In the connections shown above, some cables may not be included w...
Page 20 - Connecting a computer or monitor; Connecting a computer; Connecting a monitor
13 Connecting a computer or monitor Connecting a computer The projector provides two VGA input sockets that allow you to connect them to both ! IBM ® compatibles and Macintosh ® computers. A Mac adapter is needed if you are ! connecting legacy version Macintosh computers. To connect the projector to...
Page 21 - Connecting Video source devices; Connecting an HDMI source device; To connect the projector to an HDMI source device:
14 Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: • HDMI • Component Video • S-Video • Video (composite) You need only connect the projector to a Video source device using just one of the above ! co...
Page 22 - Connecting a Component Video source device; To connect the projector to a Component Video source device:; Connecting an S-Video source device; To connect the projector to an S-Video source device:
15 Connecting a Component Video source device Examine your Video source device to determine if it has a set of unused Component Video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To con...
Page 23 - Connecting a composite Video source device; To connect the projector to a composite Video source device:; VIDEO
16 Connecting a composite Video source device Examine your Video source device to determine if it has a set of unused composite Video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To con...
Page 24 - Operation; Powering on/off the projector; Powering on the projector:; SOURCE; Powering Off the Projector:
17 Operation Powering on/off the projector Powering on the projector: 1. Complete the AC power cord and peripheral signal cable(s) connections.2. Press to turn on the projector. The projector takes a minute or so to warm up. • If the projector is still hot from previous activity, it will run the coo...
Page 25 - Adjusting the projector height; Adjusting the Projector Zoom and Focus
18 Adjusting the projector height The projector is equipped with an elevator foot to adjust the image height. To raise or lower the image, turn the elevator foot to fine-tune the height. Note • To avoid damaging the projector, make sure that the elevator foot is fully retracted before placing the pr...
Page 26 - Adjusting Projection Image Size; Screen size
19 Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. . Note • Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. • Keep a space of 30 cm or more between the sid...
Page 27 - Locking control keys
20 Locking control keys With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except Power . 1. Press Lock on the remote control. ...
Page 28 - Setting the presentation timer
21 Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer on the remote control to access the Presentation Timer menu or g...
Page 30 - Menu operation; How to operate; Menu
22 Menu operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. Press MENU/EXIT on the projector or Menu on the remote control to open the OSD menu. 2. When OSD is displayed, use / to select any fea...
Page 31 - Menu tree; Main Menu
23 Menu tree Main Menu Sub Menu Settings Picture Color Mode Brightest / PC / Movie / ViewMatch / User1 / User2 / White Board / Black Board / Green Board Reference Mode Brightest / PC / Movie / ViewMatch Brightness 0 - 100 Contrast 0 - 100 Color Setting Color Temp. User/ Cool / Normal / Warm Red Gain...
Page 34 - Picture
26 Picture Color Mode There are many factory presets optimized for various types of images. • Brightest: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required. • PC: Is designed for presentations under daylight environment to ...
Page 36 - Frequency; Tracking; Zoom
28 • The default setting is “Auto” when input source is HDMI. • The default setting is “Side-by-Side” when input source is video or computer. “Auto” will be unavailable. • The brightness level of the projected image will decrease. • The Color Mode cannot be adjusted. • 3D Invert • On: Invert left an...
Page 37 - Setting
29 • Tint: Shift colors toward red or green. • Saturation: Adjust a video image from black and white to fully saturated color. Audio Setting Allow you to enter the Audio Setting menu. • Volume: Adjust the projector’s volume level. • Mute: Toggles the projector audio between on and off. Setting Proje...
Page 38 - Option
30 Allows the projector to turn off automatically if no input signal is detected after a set period of time. Sleep Timer No matter whether the projector detect signal or not, the projector will turn off automatically when the countdown has finished. Standby Setting • Green Mode: Enable this function...
Page 39 - Language
31 My Button Allow user to define a short cut key on the remote control, and the function item is selected in OSD menu. Pattern Display embedded test pattern. Factory Default Restore settings to factory default. Note • The following settings will still remain: Keystone, Password, Projection, High Al...
Page 40 - Maintenance; Cleaning the lens
32 Maintenance The projector needs proper maintenance. You should keep the lens clean as dust, dirt or spots will project on the screen and diminish image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always s...
Page 41 - Replacing the Lamp
33 Replacing the Lamp As the projector operates over time, the brightness of the projector lamp gradually decreases and the lamp becomes more susceptible to breakage. We recommend replacing the lamp if a warning message is displayed. Do not attempt to replace the lamp yourself. Contact the qualified...
Page 42 - Option > Lamp Setting
34 1. Turn off the projector. 2. If the projector is installed in a ceiling mount, remove it 3. Unplug the power cord. 4. Loosen the screw in the side of the lamp cover and remove the cover. 5. Remove the screws from the lamp module, raise the handle, and lift out the module. 6. Insert the new lamp ...
Page 43 - Specifications
35 Specifications Display system Single 0.55" DLP panel Resolution XGA (1024 x 768 pixels) Zoom 1.1x F/No. 1.97 - 2.17 Focal length 21.95 - 24.18mm Screen size 30” - 300” Lamp 190W (PJD5232 / PJD5234)280W (PJD7223) Input terminal D-Sub 15-pin x 2, S-Video x 1, Video x 1, Audio signal input (3.5 ...
Page 45 - Appendix; LED Indicator Messages; LED Type
37 Appendix LED Indicator Messages LED Type Color Status Meaning Power LED Blue Solid Standby mode when green mode is turned on. Temp LED Red Off Lamp LED Red Off Power LED Blue Flash Standby mode when green mode is turned off. Temp LED Red Off Lamp LED Red Off Power LED Blue Flash Powering up Temp ...
Page 46 - Compatibility Modes
38 Compatibility Modes Computer: Video: Resolution H-Sync [KHz] V-Sync [Hz] 640 x 350 37.9 85.0 640 x 480 24.6 50.0 31.5 59.9 37.9 72.8 37.5 75.0 43.3 85.0 61.9 120.0 720 x 400 31.5 70.0 37.9 85.0 800 x 600 31.0 50.0 35.2 56.0 37.9 60.3 48.1 72.0 46.9 75.0 53.7 85.1 76.3 120.0 1024 x 768 48.4 60.0 5...
Page 47 - Troubleshooting; Image problems; Remote control problems
39 Troubleshooting Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your local reseller or service center. Please refer to "LED Indicator Messages" as well. Start-up problems If no lights turn on:• Be sure that the pow...
Page 48 - RS-232 Command and Configuration; Wire List
40 RS-232 Command and Configuration !!!!!!!!! D-Sub 9 pin 1 1 CD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Baud Rate 19200 bps Data Length 8 bit Parity Check None Stop Bit 1 bit Flow Control None Wire List C1 COLOR C2 1 Black 1 2 Brown 3 3 Red 2 4 Orange 6 5 Yellow 5 6 Green 4 7 Blue 8 8 Purple...
Page 51 - IR Control Table
43 IR Control Table System Code: 83F4Format : NEC 17 08 41 45 52 40 10 0b 0e 0f 0c 30 56 28 36 37 06 05 31 18 82 8E 03 83 55 2B 07 27 14 13 15
Page 53 - Customer Support
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Website T = TelephoneF = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818NZ= 0800 008 822 [email protected]...
Page 54 - Limited Warranty; ViewSonic; Who the warranty protects:; What the warranty does not cover:
Limited Warranty ViewSonic ® Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic wil...
Page 55 - Limitation of implied warranties:
How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to “Customer Support” page). You will need to provide your product’s serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated s...
Page 56 - Mexico Limited Warranty
Mexico Limited Warranty ViewSonic ® Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSo...
