Page 2 - CONTENTS; ViewSonic
CONTENTS Introduction ........................................................................................................5 Projector Features ....................................................................................................... 5Package Contents ..................................
Page 3 - Compliance Information; FCC Statement
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired op...
Page 4 - Important Safety Instructions; manufacturer’s instructions.
Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this unit near water.6. Clean with a soft, dry cloth.7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s inst...
Page 5 - Declaration of RoHS Compliance; Substance; Examples of exempted components are:
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply ...
Page 6 - Copyright Information; Copyright; Product Registration; For Your Records
Copyright Information Copyright © ViewSonic ® Corporation, 2010. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries....
Page 7 - Introduction; Projector Features
Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendlydesign to deliver high reliability and ease of use.The projector offers the following features: Single chip 0.55" Texas Instruments DLP ® technology XGA (1024 x 768 pixels...
Page 8 - Package Contents; Optional accessories
Package Contents When you unpack the projector, make sure you have all these components: Optional accessories Projector with Lens Cap AC Power Cord Remote Control (IR) ViewSonic CD Wizard Quick Start Guide VGA Cable (D-SUB to D-SUB) Filter coverP/N: P4R34-4600-00 RS232 cableP/N: J2552-0208-00 RGB to...
Page 9 - Projector Overview; Front View
Projector Overview Front View Lens cap Filter cover Elevator button Speaker Lens cap strap Focus ring Projection lens Zoom ring Front IR remote control sensor Control panel Ventilation holes (intake) Lamp cover 11 10 9 1 3 5 4 7 6 2 12 8 1 7 2 8 3 9 4 10 5 11 6 12 PJD6211P 7 ViewSonic
Page 11 - Using the Product; Control Panel; LED
Using the Product Control Panel LED Button Function Power (Power LED indicator) Refer to “LED Indicator Messages”. TEMP (Temperature LED indicator) Refer to “LED Indicator Messages”. LAMP (Lamp LED indicator) Refer to “LED Indicator Messages”. / Keystone Manually correct distorted images resulting f...
Page 12 - Connection Ports
Connection Ports COMPUTER IN 1 Connect image input signal (analog RGB or component) to this jack. COMPUTER IN 2 Connect image input signal (analog RGB or component) to this jack. MONITOR OUT Connect to a computer display, etc. S-VIDEO Connect S-Video output from video equipment to this jack. VIDEO C...
Page 13 - Remote Control
Remote Control POWER Turn the projector on or off. Four directional buttons Use four directional buttons to select items or make adjustments to your selection. MENU Display or exit the on-screen display menus. Enter Confirmed selections. Exit Exit OSD Menu. Keystone+ / - Adjust image distortion caus...
Page 14 - Replacing the Battery; For the first time use:
Replacing the Battery For the first time use: Remove the transparent insulation tape by pullingit before use. For battery change: 1. Push the catch to the left and remove the battery holder. 2. Remove the old Lithium coin cell and install new one(CR2025). Ensure that the side with the mark “+” is up...
Page 15 - Remote Control Operation
Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear 10 15 7m 5m 5m 15 10 7m 5m 5m The remote control may not operate when there is sunlight or other strong light such as...
Page 16 - Installation; Connecting the Projector
Installation Connecting the Projector Audio Cable S-Video Cable VGA Cable (D-Sub to D-Sub) Composite Video Cable RS-232 Cable VGA (D-Sub) to HDTV (RCA) Cable USB Cable 1 2 3 4 5 6 7 1 1 2 1 5 2 6 3 7 4 The figure above is a sample connection. This does not mean that all of these devices can or mus...
Page 17 - Powering On/Off the Projector; Powering On the Projector:; SOURCE; Powering Off the Projector:
Powering On/Off the Projector Powering On the Projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. Press button to turn on the projector. The projector takes a minute or so to warm up. 4. Turn on your source (computer, notebook, DV...
Page 18 - Adjusting the Projector; Adjusting the Projector Height
Adjusting the Projector Adjusting the Projector Height The projector is equipped with an elevator foot to adjust the image height.To raise or lower the image:1. To raise or lower the image, press the elevator button and raise or lower the frontof the projector. Release the button to lock the adjustm...
Page 19 - Adjusting Projection Image Size
Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. Screen size Diagonal (inch) 4 : 3 Screen Wide Tele Projection distance Projection distance m inch m inch 40 1.57 61.76 1.73 67.93 50 1.96 77.20 2.16 84.92 60 2.35 92.64 2.59 101...
Page 20 - Menu Operation
Menu Operation The projector has multilingual on-screen display menus that allow you to make imageadjustments and change a variety of settings. PJD6211P 18 ViewSonic
Page 22 - How to operate
How to operate 1. Press the MENU button to open the OSD menu. 2. When OSD is displayed, use S / T to select any feature in the main menu. 3. After selecting the desired main menu item, press X to enter sub-menu for feature setting. 4. Use S / T to select the desired item and adjust the settings with...
Page 26 - Maintenance; Warning; Cleaning the Lens
Maintenance The projector needs proper maintenance. You should keep the lens clean as dust, dirtor spots will project on the screen and diminish image quality. If any other parts needreplacing, contact your dealer or qualified service personnel. When cleaning any partof the projector, always switch ...
Page 27 - Replacing the Lamp
Replacing the Lamp As the projector operates over time, the brightness of the projector lamp graduallydecreases and the lamp becomes more susceptible to breakage. We recommendreplacing the lamp if a warning message is displayed. Do not attempt to replace thelamp yourself. Contact the qualified servi...
Page 29 - Specifications
Specifications Display system Single 0.55" DLP panel Resolution XGA (1024 × 768) Zoom 1.1X F/No. 2.51 - 2.69 Focal length 21.95 - 24.18mm Screen size 27” – 300” Lamp 180W Input terminal D-Sub 15-pin x 2, S-VIDEO x 1, VIDEO x 1, Audio signal input (3.5 mm stereo mini jack) x 1 Output terminal D-S...
Page 30 - Appendix; LED Indicator Messages
PJD6211P 28 ViewSonic Appendix LED Indicator Messages LED Type Color Status Meaning Power LED Blue Flash The projector is in standby mode. Lamp LED Red Off Temp LED Red Off Power LED Blue Solid Powering up Lamp LED Red Off Temp LED Red Off Power LED Blue Solid Normal operation Lamp LED Red Off Temp ...
Page 31 - Compatibility Modes
Compatibility Modes Computer: Compatibility Resolution H-Sync [KHz] V-Sync [Hz] VGA 640 x 480 24.6 50.0 31.5 59.9 37.9 72.8 37.5 75.0 43.3 85.0 640 x 480 @ 120Hz 61.9 119.5 720 x 400 31.5 70.0 37.9 85.0 SVGA 800 x 600 31.0 50.0 35.2 56.0 37.9 60.3 48.1 72.0 46.9 75.0 53.7 85.1 76.3 120.0 800 x 600 @...
Page 33 - Troubleshooting; Image problems; Remote control problems
Troubleshooting Refer to the symptoms and measures listed below before sending the projector forrepairs. If the problem persists, contact your local reseller or service center. Pleaserefer to "LED Indicator Messages" as well. Start-up problems If no lights turn on: Be sure that the power c...
Page 34 - RS-232 Command and Configuration
RS-232 Command and Configuration Baud Rate:19200 Parity Bit:none Data Bit:8 Stop Bit:1 Assign Port:COM1 Name Operation type CRC Header Command Response Power ON BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00 06 OFF BE, EF, 03, 06, 00, DC, DB, 69, 00, 00, 00, 00, 00 06 Source Computer (Analog RGB...
Page 35 - Wire List
D-Sub 9 pin 1 1 CD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Wire List C1 COLOR C2 1 Black 1 2 Brown 2 3 Red 3 4 Orange 4 5 Yellow 5 6 Green 6 7 Blue 7 8 Purple 8 9 White 9 SHELL DW SHELL PJD6211P 33 ViewSonic
Page 36 - IR Control Code
IR Control Code Key Format Byte1 Byte2 Byte3 Byte4 Power NEC 83 F4 13 87 Source NEC 83 F4 13 02 Up NEC 83 F4 13 82 Down NEC 83 F4 13 85 Left NEC 83 F4 13 83 Right NEC 83 F4 13 81 MENU NEC 83 F4 13 84 Auto NEC 83 F4 13 64 Mouse NEC 83 F4 13 6B ViewMatch NEC 83 F4 13 63 Freeze NEC 83 F4 13 80 Enter / ...
Page 37 - Customer Support; You will need the product serial number.
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 [email protected]...
Page 38 - Limited Warranty; VIEWSONIC; What the warranty covers:; This warranty is valid only for the first consumer purchaser.; What the warranty does not cover:; b. Operation outside of product specifications.
Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic wil...
Page 39 - Limitation of implied warranties:; Any claim against the customer by any other party.; Effect of state law:; contact ViewSonic or your local ViewSonic dealer.
h. Use of supplies or parts not meeting ViewSonic’s specifications. i. Normal wear and tear. j. Any other cause which does not relate to a product defect. 3. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact View...
Page 40 - Mexico Limited Warranty
Mexico Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSo...
