Page 2 - Contents; Getting Started
ViewSonic VG2436wm-LED Contents Compliance Information.............................................................................. 1Important Safety Instructions ...................................................................... 2Declaration of RoHS Compliance ....................................
Page 3 - Compliance Information
ViewSonic VG2436wm-LED 1 Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that ...
Page 4 - Important Safety Instructions
ViewSonic VG2436wm-LED 2 Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or elect...
Page 5 - Declaration of RoHS Compliance
ViewSonic VG2436wm-LED 3 Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC ofthe European Parliament and the Council on restriction of the use of certain hazardoussubstances in electrical and electronic equipment (RoHS Directive) a...
Page 6 - Copyright Information; Product Registration; For Your Records
ViewSonic VG2436wm-LED 4 Copyright Information Copyright © ViewSonic ® Corporation, 2010. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks ofMicrosoft Corporation in the United Sta...
Page 7 - Package Contents
ViewSonic VG2436wm-LED 5 Getting Started Congratulations on your purchase of a ViewSonic ® LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, W...
Page 8 - Quick Installation
ViewSonic VG2436wm-LED 6 Quick Installation 1. Connect power cord (and AC/DC adapter if required) 2. Connect video cable • Make sure both the LCD display and computer are turned OFF • Remove rear panel covers if necessary • Connect the video cable from the LCD display to the computer Macintosh users...
Page 10 - Landscape/Portrait Modes; To Raise and Lower the display
ViewSonic VG2436wm-LED 8 Landscape/Portrait Modes The LCD display can operate in either Landscape or Portrait mode. To switch from Landscape (default) to Portrait mode, do the following: 1. From the front, gently raise the LCD display to allow more clearance. 2. Pull the bottom of the LCD display ou...
Page 11 - Using the LCD Display; Setting the Timing Mode; OSD and Power Lock Settings
ViewSonic VG2436wm-LED 9 Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image andminimizing eye strain. The timing mode consists of the resolution (example 1920 x 1080) and refresh rate (or vertical frequency; example 60 Hz...
Page 12 - Adjusting the Screen Image
ViewSonic VG2436wm-LED 10 Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The OSD controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 11. Scrolls through menu opti...
Page 14 - Main Menu Controls
ViewSonic VG2436wm-LED 12 Main Menu Controls Adjust the menu items shown below by using the up S and down T buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper imag...
Page 18 - Other Information; Specifications
ViewSonic VG2436wm-LED 16 Other Information Specifications 1 Macintosh computers older than G3 require a ViewSonic ® Macintosh adapter. To order an adapter, contact ViewSonic. LCD Type Display Size Color FilterGlass Surface TFT (Thin Film Transistor), Active Matrix 1920 x 1080 LCD,0.2715 mm pixel pi...
Page 19 - Troubleshooting
ViewSonic VG2436wm-LED 17 Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON...
Page 20 - Customer Support
ViewSonic VG2436wm-LED 18 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = TelephoneF = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818NZ= 0800 008...
Page 21 - Cleaning the LCD Display
ViewSonic VG2436wm-LED 19 Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If the screen still ...
Page 22 - Limited Warranty
ViewSonic VG2436wm-LED 20 Limited Warranty VIEWSONIC ® LCD DISPLAY What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the wa...
Page 24 - Mexico Limited Warranty
ViewSonic VG2436wm-LED 22 Mexico Limited Warranty VIEWSONIC ® DISPLAY PRODUCTS What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship d...