ViewSonic VS13510 - Manual

SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous...

NORTH EUROPE (NORDIC COUNTRIES) INFORMATION Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Il...

Package Contents The LCD monitor pack* should include: • LCD monitor Video Signal Cable (D-SUB to D-SUB Cable) • Power cord (1.8 m) • VGA Signal Cable (1.8 m) • CD User Manual & QSG • Remote Control and AAA Batteries • Main switch cover • Screw for Main Switch cover x 6 • Clamper x 2 • Screw for...

Parts Name and Functions Control Panel POWER button ( ) : To switch the power on/off. MUTE button : To switch the audio mute ON/OFF. SOURCE button : To set the function while OSD menu is on or to activate input selection menu while OSD menu is off. PLUS (+) button : To increase the adjustment while ...

Terminal Panel EXTERNAL CONTROL (mini D-Sub 9 pin) This is for serial connection when multiple monitors are connected. To achieve remote management through RS232C commands (refer to the RS232C remote control user manual), connect the RS232C OUT connector from a computer or from a different monitor t...

Remote Control MENU button To turn the OSD menu on/off. DOWN button To move the highlight bar down to adjust the selected item when OSD menu is on. To move the sub-picture down when in “PIP” mode. INFO. button To turn on/off the setting information displayed on the right-up corner of the screen . SI...

Operating Range for the Remote Control Handling the remote control * Do not subject to strong shock. * Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately. Point the top of the remote control towards the LCD monitor's remote sensor...

Setup Procedure 1. Install the system on the right location CAUTION: THE LCD MONITOR MUST BE MOVED OR INSTALLED BY TWO OR MORE PERSONS. Failure to follow this caution may result in injury and damage when the LCD monitor falls. CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF. The LCD d...

9. Adjust the image Make adjustments to brightness or contrast if required. 10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used. “POWER SAVE”, “PANEL SAVING”, “DATE AND TIME”. 11. To prevent the main power switch...

How to Mount and Attach Feet to the LCD Monitor You can install the LCD monitor in one of the following two ways: Method 1: Attach and remove the optional stands How to install stands 1. Please turn the monitor off. 2. After inserting stand in guide block, fasten the thumbscrews on both sides of the...

To avoid monitor from falling Take measures to prevent the monitor from falling over in case of an earthquake or other disaster might occur to lessen the probability of injury and damage. As shown in the figure below, secure the monitor to a solid wall or pillar using rope (commercially available) s...

Ventilation Requirements for enclosure locating To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. ViewSonic CD4233 18

Connectivity Before making connections: * First turn off the power of all the attached equipments before make connections. * Refer to the user manual included in each separate piece of equipment. Connectivity Diagram ViewSonic CD4233 19

Connecting to a Personal Computer As you finish the connection between the computer and the LCD monitor, you could play the contents in the computer and display them on the LCD monitor. Connecting the LCD Monitor to a Personal Computer • To achieve this, apply the supplied VGA signal cable (mini D-s...

Connecting to a Digital Interface Equipment Connections can be made between the LCD monitor and other digital equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The HDMI , DVI-D...

Connecting to a DVD Player As you finish the connection between the DVD player and the LCD monitor, you could display the contents from the played DVD on the LCD monitor. You might like to refer to your DVD player’s manual for further information. Connect the LCD Monitor to a DVD Player • To achieve...

Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier's manual for further information. Connect the LCD Monitor to a Stereo Amplifier • Turn on the LCD monitor and the amplifier only after all connections have been finished. • Apply 2 RCA...

Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. The monitor can be powered on or off using the following three options: 1. Pressing the Main Power Switch. NOTE: When the Main Power Switch is used to power of...

Power Indicator Status Power ON Green Power Standby Red Power OFF LED Off Diagnosis (Detecting failure) Red Blinking * See troubleshooting Using Power Management Please turn off the LCD monitor when it will not be used for long time. This could potentially increase the life and decrease the power co...

Smart Picture Mode HDMI, VGA HIGHBRIGTH STANDARD sRGB COMPONENT, VIDEO HIGHBRIGTH STANDARD CINEMA Audio Source Switching You can select the audio source using the AUDIO SOURCE button on the remote control. HDMI HDMI AUDIO1 AUDIO2 AUDIO3 Control Lock Mode This function disables the operation o button...

Main-Menu PICTURE BRIGHTNESS Adjusts the overall image and background screen brightness. Press ُ button to increase brightness. Press ٙ button to decrease brightness. CONTRAST Adjusts the image brightness for the input signal. Press ُ button to increase contrast. Press ٙ button to decrease contrast....

Main-Menu SCREEN H POSITION Controls Horizontal Image position within the display area of the LCD. Press ُ button to move screen to right. Press ٙ button to move screen to left. V POSITION Controls Vertical Image position within the display area of the LCD. Press ُ button to move screen to UP. Press...

Main-Menu AUDIO BALANCE Adjusts the balance of L/R volume. Press ُ button to move the stereo sound image to right. Sound of the left side will be small. Press ٙ button to move the stereo sound image to left. TREBLE This feature helps you to accentuate or reduce the high frequency sound. Press ُ butt...

Main-Menu CONFIGURATION 1 AUTO ADJUST * : INPUT VGA only Press "ENTER" button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level. Press " EXIT " button to cancel execution AUTO ADJUST and then will return to th...

Main-Menu CONFIGURATION 2 OSD TURN OFF The OSD control menu will stay on as long as it is used. In the OSD Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu.The preset choices are 5 -120 seconds. INFORMATION OSD Selects the ...

Main-Menu ADVANCED OPTION INPUT RESOLUTION * : INPUT VGA only This feature makes the display controlling the source in order to match display capabilities by choice or automatically. You can select one of the following timings: (1)1024x768, 1280x768, 1360x768 and 1366x768. (2) 640x480, 720x480 and 8...

NOTE NOTE 1: IMAGE PERSISTENCE Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, ...

Features Full HD LCD display 1920x1080p This display has a resolution that is referred to as Full HD. The state-of-the-art LCD screen technology has the full high-definition widescreen resolution of 1080 progressive lines, each with 1920 pixels. This allows the best possible picture quality for HD i...

Troubleshooting No picture • The signal cable should be completely connected to the graphics card/computer. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the graphics card or system being used. (Please con...

Specifications Specifications Product Specifications Analog Input Digital Input LCD Module Diagonal: Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Response time: View Angle: 42" / 106.7 cm0.485 mm1920 x 1080 dots1.07 billion colors (depending on video card used)700 cd/m 2 (typ.) 1,...

ViewSonic CD4233 Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site T=TelephoneF=Fax E-mail Australia/New Zealand www.viewsonic.com.au AUS=1800 880 818 NZ=0800 008 822 service...

ViewSonic CD4233 Limited Warranty VIEWSONIC LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the wa...

ViewSonic CD4233 Mexico Limited Warranty VIEWSONIC LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during...

ViewSonic CD4233 Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,Col. San Fernando Huixquilucan, Estado de MéxicoTel: (55) 3605-...