Page 2 - ViewSonic; Compliance Information; FCC Statement
PJD2121 ViewSonic Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may ...
Page 3 - Important Safety Instructions; Unplug this unit when unused for long periods of time.
Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this unit near water.6. Clean with a soft, dry cloth.7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s inst...
Page 4 - Declaration of RoHS Compliance; Substance; mentioned in the Annex of RoHS Directive.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply ...
Page 5 - Copyright Information; Product Registration; For Your Records; ViewSonic SVGA DLP Projector
Copyright Information Copyright© ViewSonic® Corporation, 2009. All rights reserved.Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.Vie...
Page 6 - Table of contents
1 Table of contents Introduction................................... 2 Projector features ........................................... 2 Shipping contents............................................ 3 Projector exterior view..................................... 4 Controls and functions ..................
Page 7 - Introduction; Projector features
2 Introduction Projector features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. • Quick auto search speeding up the signal detecting process • Digital keystone c...
Page 8 - Shipping contents; Standard accessories
3 Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Optional access...
Page 9 - Projector exterior view
4 Projector exterior view 1. Focus ring 2. Projection lens 3. Lens cover 4. LED indicator 5. Adjuster foot 6. RGB (PC) signal input socket 7. Component video (YPbPr/YCbCr) signal input socket 8. Power DC inlet 9. Kensington anti-theft lock slot 10. Rear IR remote sensor 11. Lamp cover PJD2121 ViewSo...
Page 10 - Controls and functions
5 Controls and functions Projector and remote control 1. Focus ring Adjusts the focus of the projected image. See "Fine-tuning the image size and clarity" on page 15 for details. 2. Keystone + Manually corrects distorted images resulting from an angled projection. 3. Keystone – Manually corr...
Page 11 - Remote control effective range
6 Remote control effective range Infra-Red (IR) remote control sensor is located on the Back of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and th...
Page 12 - Positioning your projector; Choosing a location; Projection dimensions
7 Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projec...
Page 13 - Connection; Connecting a computer or monitor; Connecting a computer
8 Connection When connecting a signal source to the projector, be sure to: 1 Turn all equipment off before making any connections. 2 Use the correct signal cables for each source. 3 Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projec...
Page 14 - Connecting a Component Video source device
9 Connecting a Component Video source device The projector provides one Component input socket that allows you to connect Component Video output from DVD player or other equipment. z Make sure you have Component cable; this cable is not a standard part in shipping content. The final connection path ...
Page 15 - Operation; Starting up the projector; Use the Menu
10 Operation Starting up the projector 1. Plug the power cord into the projector and into a wall socket and power adaptor. Plug DC jack to projector. Check that the POWER indicator light on the projector flashes blue after power has been applied. 2. Remove the lens cap. If it is closed, it could bec...
Page 16 - Switching input signal; Adjusting the projected image; Adjusting the projection angle
11 To use the OSD menus, please set them to your familiar language first. 1. Press MENU on the remote control to turn on the OSD. Press Enter to select. 3. Press to select the language you need and press Enter. 2. Use to highlight the LANGUAGE, press Enter to select. 4. Press MENU on the remote cont...
Page 17 - Fine-tuning the image size and clarity; Selecting the aspect ratio; About the aspect ratio
12 If the projector is not placed on a flat surface or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes. Be careful when you press th...
Page 18 - Selecting a picture mode
13 screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV and 4:3 aspect DVD movies, as it displays them without aspect alteration. 4 16:9 : Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This...
Page 19 - Fine-tuning the image quality in user modes; Hiding the image
14 Picture modes for different types of signals The picture modes available for different types of signals are listed below. 1 VGA (Default) : Maximizes the brightness of the projected image. This mode is suitable for presentation. 2 ViewMatch mode : Switch in between high brightness performance or ...
Page 20 - Shutting down the projector
15 Shutting down the projector Press I POWER and a confirmation message displays prompting you. If you don't respond in a few seconds, the message will disappear. Press POWER a second time. The POWER indicator light flashes RED, the projection lamp shuts down, and the fans will continue to run for a...
Page 21 - Menu operation; Menu system
16 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu item...
Page 22 - Description of each menu
17 Description of each menu Feature Description min Max Default Blank Screen Allows you to select which logo screen will display during projector start-up. N/A N/A ViewSonic Keystone Vertical Keystone function by using DDP2230 of “TI” chip to provide vertical keystone correction -30 +30 0° Aspect Ra...
Page 23 - Maintenance; Care of the projector; Cleaning the lens; Lamp information; Getting to know the lamp hour
18 Maintenance Care of the projector Your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whene...
Page 24 - Timing of replacing the lamp; Replacing the lamp
19 Timing of replacing the lamp When the lamp’s total working time accumulates to over 2000 hours, the On-Screen Display (OSD) will deliver a message recommending that you replace the lamp. Please contact a service center to replace the lamp as soon as possible The following lamp warning displays wi...
Page 25 - Indicators; Light
20 Indicators Light Status & Description Power events Flashing blue (1 sec interval) Stand-by mode Blue Powering up Blue Normal operation Red This projector needs 60 seconds to cool down. Lamp events Flashing blue (10 sec interval) This projector will go into hot-ignite by 4 times. Thermal event...
Page 26 - Troubleshooting
21 Troubleshooting ¾ The projector does not turn on. Cause Remedy There is no power from the power cord. Plug the power cord into the AC inlet on the projector, and plug the power cord into the power outlet. Attempting to turn the projector on again during the cooling process. Wait until the cooling...
Page 27 - Specifications; Projector specifications
22 Specifications Projector specifications All specifications are subject to be changed without notice. General Product name Digital Projector Model name PJD2121 Optical Resolution 800 x 600 SVGA Display system 1-CHIP DMD Lens F/Number F = 2.6 Lamp 50W lamp Electrical Power supply AC Adaptor 100–240...
Page 30 - Appendix; IR control table
25 Appendix IR control table 1st Byte 2nd Byte 3rd Byte Key POWER 83 F4 0x02 MENU 83 F4 0x0F UP (VOL+) 83 F4 0x11 DOWN (VOL-) 83 F4 0x14 LEFT 83 F4 0x16 RIGHT 83 F4 0x18 ENTER 83 F4 0x10 SOURCE 83 F4 0x04 VIEWMATCH 83 F4 0x19 BLANK 83 F4 0x1A PJD2121 ViewSonic
Page 31 - Customer Support; You will need the product serial number.
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Web Site T=TelephoneF=Fax E-mail Australia/New Zealand www.viewsonic.com.au AUS=1800 880 818NZ=0800 008 822 [email protected]...
Page 32 - Limited Warranty; VIEWSONIC; What the warranty covers:; This warranty is valid only for the first consumer purchaser.; What the warranty does not cover:; b. Operation outside of product specifications.
Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic wil...
Page 33 - Any claim against the customer by any other party.; Effect of state law:; : Projector Warranty PRJ_LW01 Rev. 1h 06-25-07
How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to “Customer Support” page). You will need to provide your product’s serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated s...
Page 34 - Mexico Limited Warranty; VIEWSONIC® PROJECTOR
Mexico Limited Warranty VIEWSONIC® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSon...
