Page 2 - ViewSonic; N1930w; ENGLISH; Contents; Getting Started; Specifications
ViewSonic N1930w ENGLISH Contents Important Safety Instructions........................................................................... 1Copyright Information ...................................................................................... 2Product Registration ................................
Page 3 - Important Safety Instructions
ViewSonic N1930w 1 ENGLISH Important Safety Instructions 1. Read these instructions completely before using the equipment.2. Keep these instructions in a safe place.3. Heed all warnings.4. Follow all instructions.5. Do not use this equipment near water. Warning: To reduce the risk of fire or electri...
Page 4 - Copyright Information; Copyright © ViewSonic; Product Registration; ViewSonic LCD TV; environmental laws of your location.
ViewSonic N1930w 2 ENGLISH Copyright Information Copyright © ViewSonic ® Corporation, 2008 . All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.Disclaimer:ViewSonic Corporation shall not be liable for technical or...
Page 5 - Antenna Installation Instructions; Cleaning the LCD TV; Disclaimer
ViewSonic N1930w 3 ENGLISH Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810...
Page 6 - Congratulations on your purchase of a ViewSonic; Package Contents; ViewSonic User Guide & Quick Start Guide; Mounting ViewSonic LCD TV to the wall; For Hong Kong area, there is no warranty card.
ViewSonic N1930w 4 ENGLISH Getting Started Congratulations on your purchase of a ViewSonic ® LCD TV. Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD TV package includes: • LCD TV • Power Cord • VGA Cable • Warranty Card* • Remote Control...
Page 7 - LCD TV to allow adequate cooling during operation.
ViewSonic N1930w 5 ENGLISH • Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm, as longer screws found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail. The wall-mount screw type is M4 x L10. • Mount the wall mount bracket to...
Page 8 - Front View of the Product
ViewSonic N1930w 6 ENGLISH Front View of the Product Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. Menu Turn OSD menu ON/OFF. Remote Control Receiver Receives IR signals from the...
Page 9 - Rear View of the Product
ViewSonic N1930w 7 ENGLISH Rear View of the Product Power (AC input) Connect to LCD TV and AC outlet with the power cord. HDMI Input Terminal Connect this port to the HDMI output of A/V device. VGA (15 pin) Signal Input Connect this port to the VGA output of your PC. YPbPr / HD Component Video Input...
Page 10 - Remote Control
ViewSonic N1930w 8 ENGLISH Remote Control ( For Hong Kong area ) ( For China area )
Page 11 - Remote control button function as follow
ViewSonic N1930w 9 ENGLISH Remote control button function as follow 1 INPUT Select input source 2 ENTER Enter the function setting 3 TV Swap between TV. Swap to TV when in other source 4 VOL+ and VOL- Adjust volume up or down 5 0~9 number button Switch channel number keys 6 POWER Power ON/OFF 7 UP/ ...
Page 12 - Connecting RF antenna or Cable TV Wire; Installation; Insert Remote Control Batteries; nels into memory with; Auto Scan; function when using an antenna or cable; CAUTION
ViewSonic N1930w 10 ENGLISH 2. Connecting RF antenna or Cable TV Wire Installation 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. 1. Insert Remote Co...
Page 14 - Connecting to a computer
ViewSonic N1930w 12 ENGLISH 4) With HDMI cable: HDMI Cable (not supplied) VCD or DVD Player (DVD Player should have the HDMI output terminal) 5) With HDMI-DVI cable: HDMI-DVI Cable (not supplied) Audio in Cable (not supplied) PC VGA 15 Pin Cable 4. Connecting to a computer Connect the VGA cable from...
Page 15 - your computer to the audio input terminal (green) of the LCD TV.; Connecting with the power cord; grounded electrical outlet.
ViewSonic N1930w 13 ENGLISH Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. 2) With HDMI-DVI cable: Audio in Cab...
Page 16 - Basic Operation; button on the remote control ,then press ▼ or ▲ to select the re
ViewSonic N1930w 14 ENGLISH Basic Operation To operate your LCD TV, you may use the TV remote control or buttons located at bottom of the LCD TV to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert...
Page 17 - Using OSD Menu; MENU; Press ◄► to cycle through the menus.; ENTER; or ▲▼ to enter the menu you select.
ViewSonic N1930w 15 ENGLISH Using OSD Menu You are able to use OSD menus to adjust various settings by using your remote control or menu buttons on the front panel of the LCD TV. The basic operation is as following: t Press MENU to display OSD menu. t Press ◄► to cycle through the menus. t Press ENT...
Page 18 - Picture Menu — To adjust the picture quality; When input source is TV:; OSD Functions; ADVANCED OPERATION—OSD MENU
ViewSonic N1930w 16 ENGLISH Picture Menu — To adjust the picture quality When input source is TV: OSD Functions ADVANCED OPERATION—OSD MENU • Contrast: To adjust contrast of video. • Brightness: To adjust luminance of video. • Colour: To adjust colour. • Tint: To adjust tint level. • Sharpness: To a...
Page 19 - Setup Menu — To set up OSD window; Sound Menu — To adjust audio quality and status
ViewSonic N1930w 17 ENGLISH • Sleep: Press ◄► to set the off timer. There are several times to choose: 15 min, 30 min, 45 min, 60 min, or OFF. • OSD Language: To select the language of OSD from Simply Chinese, English, Traditional Chinese,. • OSD H-Position: To adjust the horizontal position of OSD....
Page 20 - Channel Menu — To setup for TV; It is only active in TV source.
ViewSonic N1930w 18 ENGLISH 1. Press ► to get into “Manual Search”. 2. Move the cursor to “Prog. No”, and select the desired channel position with ◄►. 3. Move your cursor to “Search”, and search the detectable channels with ◄►. 4. Move your cursor to “Fine Tune”, and adjust the picture with ◄►. 5. M...
Page 21 - PC Menu — To adjust for PC; When input source is PC: When input source is HDMI(PC mode):; If you want to exchange channel 1 with channel 2:
ViewSonic N1930w 19 ENGLISH PC Menu — To adjust for PC It is only active in PC and HDMI (support PC mode). When input source is PC: When input source is HDMI(PC mode): • Auto Adjust: To process auto image adjustment by pressing ►. • Contrast: To adjust foreground luminance of video. • Brightness: To...
Page 23 - Other Information
ViewSonic N1930w 21 ENGLISH Other Information Specifications LCD Type Color Filter Glass surface 19.0” TFT Active Matrix RGB 0.285 (H) x 0.285 (V) mm pixel RGB vertical stripe Anti-Glare Input signal RGB TV system Video Audio RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, f h : 30-80 kHz, f v :50...
Page 24 - Troubleshooting
ViewSonic N1930w 22 ENGLISH Troubleshooting Problem Possible Solution No power • Make sure the power cord is properly connected to the LCD TV AC power socket. • Make sure the AC power cord is properly connected to the wall outlet. • Make sure the DC power button is ON (Blue LED). • Plug another elec...
Page 25 - the power of the LCD TV and the AVC System, or unplug the AC cord
ViewSonic N1930w 23 ENGLISH Unit cannot be operated • External influences such as lightning or static electricity may cause improper operation. In this case, operate the unit after first turning on the power of the LCD TV and the AVC System, or unplug the AC cord for 1 to 2 minutes, then replug agai...
Page 26 - Customer Support; Declaration of RoHS Compliance; Name of; Mercury
ViewSonic N1930w 24 ENGLISH Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site Telephone Email China www.viewsonic.com.cn 800 820 3870 [email protected] Hong Kong ww...
Page 27 - Limited Warranty; VIEWSONIC
ViewSonic N1930w 25 ENGLISH Limited Warranty VIEWSONIC ® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warra...
