ViewSonic VS12087 - Manual

Optiquest Q72b 3 Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC ofthe European Parliament and the Council on restriction of the use of certain hazardoussubstances in electrical and electronic equipment (RoHS Directive) and is de...

Optiquest Q72b 4 Copyright Information Copyright © ViewSonic ® Corporation, 2007. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks ofMicrosoft Corporation in the United S...

Optiquest Q72b 5 Getting Started Congratulations on your purchase of a ViewSonic ® LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windows N...

Optiquest Q72b 6 Quick Installation Power Code AC Outlet (Wall Socket) Computer Power Cord AC IN VGA 1. Installing the Base 1.1 Align the monitor with the opening in the base. 1.2 Note that the longer section of the base points forward. 1.3 Snap the monitor into its base. A clear click sound will af...

Optiquest Q72b 8 Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image andminimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and refresh rate (or vertical frequency; example 60 Hz). After...

Optiquest Q72b 9 Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The OSD controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 10. Main Menu with OSD controls Front ...

Optiquest Q72b 10 Main Menu Controls Adjust the menu items shown below by using the up S and down T buttons. Control Explanation Auto Setup Automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion.NOTE: Auto Image Adjust works with most common video cards. I...

Optiquest Q72b 11 Other Information Specifications 1 Macintosh computers older than G3 require a ViewSonic ® Macintosh adapter. To order an adapter, contact ViewSonic. LCD Type Color Filter Glass Surface 17” (full 17" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix WXGA LCD, 0...

Optiquest Q72b 12 Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no ...

Optiquest Q72b 13 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = TelephoneF = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818NZ= 0800 008 822 ser...

Optiquest Q72b 14 Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If the screen still not clea...

Optiquest Q72b 15 Limited Warranty VIEWSONIC ® LCD DISPLAY What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty p...

Optiquest Q72b 17 Mexico Limited Warranty VIEWSONIC ® DISPLAY PRODUCTS What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during th...