Page 2 - ViewSonic; N2652w; ENGLISH; Contents; Getting Started; ADVANCED OPERATION — OSD MENU; Other Information
ViewSonic N2652w ENGLISH Contents Compliance Information .................................................................................. 1Declaration of RoHS Compliance ................................................................... 2Important Safety Instructions ................................
Page 3 - Compliance Information; FCC Statement; • Consult the dealer or an experienced radio/TV technician for help.; Following information is only for EU-member states:
ViewSonic N2652w 1 ENGLISH Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference ...
Page 4 - Declaration of RoHS Compliance; Substance; specifically mentioned in the Annex of RoHS Directive.
ViewSonic N2652w 2 ENGLISH Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directiv...
Page 5 - Important Safety Instructions
ViewSonic N2652w 3 ENGLISH Important Safety Instructions 1. Read these instructions completely before using the equipment.2. Keep these instructions in a safe place.3. Heed all warnings.4. Follow all instructions.5. Do not use this equipment near water. Warning: To reduce the risk of fire or electri...
Page 6 - Copyright Information; Copyright © ViewSonic; Product Registration; Product disposal at end of product life; environmental laws of your location.
ViewSonic N2652w 4 ENGLISH Copyright Information Copyright © ViewSonic ® Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.Disclaimer:ViewSonic Corporation shall not be liable for technical or ...
Page 7 - Antenna Installation Instructions; Cleaning the LCD TV; Disclaimer
ViewSonic N2652w 5 ENGLISH Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810...
Page 8 - Package Contents
ViewSonic N2652w 6 ENGLISH Getting Started • LCD TV • Power Cord • VGA Cable • Quick Start Guide Congratulations on your purchase of a ViewSonic ® LCD TV. Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD TV package includes: • Remote Cont...
Page 9 - Front View of the Product
ViewSonic N2652w 7 ENGLISH Front View of the Product Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. Menu Turn OSD menu ON/OFF. CH Down Channel down when source is at TV/DTV or sel...
Page 10 - Rear View of the Product
ViewSonic N2652w 8 ENGLISH Rear View of the Product Analog TV input Connect to NTSC TV source. Digital TV input Connect to ATSC TV source. S-Video input Connect this port to the S-Video output of A/V device. AV/ S-Video signal Audio input (left/right) Connect this port to the RCA audio output connec...
Page 11 - Remote Control
Page 12 - PIP means Picture In Picture. POP means Picture Out Of Picture.; Remote control button function as follow
ViewSonic N2652w 10 ENGLISH 1 POWER Power ON/OFF 2 MTS Select Mono, Stereo or SAP in TV / Select audio language in DTV 3 INFO Display current information 4 SLEEP Set TV Sleep timer 5 SOUND Select sound modes 6 0~9, 100/- number button Directly channel select 7 VOL+ and VOL- Adjust volume UP/DOWN 8 G...
Page 13 - Connecting RF antenna, Cable TV Wire or DTV cable; Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial; Auto Scan; function when; Installation; Insert Remote Control Batteries; CAUTION
ViewSonic N2652w 11 ENGLISH 2. Connecting RF antenna, Cable TV Wire or DTV cable Make sure the power is OFF before installing your LCD TV. 1) TV: Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV channels into memory with Auto Scan function when using an antenn...
Page 14 - into memory with
ViewSonic N2652w 12 ENGLISH 3. Connecting to DVD / Set Top Box Connect Video/ Audio cables from compatible devices into the back panel of LCD TV. 1) With AV cable: RCA A/V Cable VCR or DVD Player 2) DTV: Connect the LCD TV to the cable with DTV signals and preset DTV channels into memory with Auto S...
Page 15 - Connecting to External Stereo System to Listen to LCD TV Sound
ViewSonic N2652w 13 ENGLISH 3) With YPbPr cable: YPbPr Cable (not supplied) Audio in Cable (not supplied) VCR or DVD Player 4) With HDMI cable: HDMI Cable (not supplied) VCR or DVD Player (DVD Player should have the HDMI output terminal) Audio in Cable (not supplied) 4. Connecting to External Stereo...
Page 16 - Connecting to the Headphone; Connecting to a Computer
ViewSonic N2652w 14 ENGLISH 5. Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately). Headphone (not supplied) 6. Connecting to a Computer Connect the VGA cable from VGA output of computer to the VGA terminal input of your LCD T...
Page 17 - Connecting to A/V Device with SPDIF input; Connecting with the power cord; grounded electrical outlet.
ViewSonic N2652w 15 ENGLISH 8. Connecting to A/V Device with SPDIF input Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV. SPDIF Optical Cable A/V Device Stereo System Audio Cable (not supplied) AC wall socket 9. Connecting with the power cord Connect the power c...
Page 18 - Basic Operation
ViewSonic N2652w 16 ENGLISH Basic Operation To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug, and t...
Page 21 - Video Menu — To adjust the picture quality; Video Menu is active in all but the VGA input source.; Audio Menu — To set the audio quality and status; Audio Menu is active in all but the VGA input source.; OSD Functions
ViewSonic N2652w 19 ENGLISH Video Menu — To adjust the picture quality Video Menu is active in all but the VGA input source. • Contrast: To adjust contrast of video. (right: Max, left: Min). • Brightness: To adjust luminance of video. (right: Max, left: Min). • Color: To adjust color. (right: brilli...
Page 22 - TV Menu — To set up for TV; It is only active in TV source.; Setup Menu — To set up OSD window; Setup Menu is active in all input sources.
ViewSonic N2652w 20 ENGLISH TV Menu — To set up for TV It is only active in TV source. • Tuner Mode: To select Cable or Air as the TV source. • Auto Scan: To auto scan the TV channels. Press ENTER to start auto scanning TV channels. Press ENTER again at any time to interrupt scanning. • TV: To selec...
Page 24 - DTV Menu — To set up DTV settings; It is only active in DTV source.
ViewSonic N2652w 22 ENGLISH DTV Menu — To set up DTV settings It is only active in DTV source. • Audio Language: To select an audio language from English, French, or Spanish. • Time Zone: To select Time Zones. • SPDIF Type: To select the type of audio transfer file format. • Auto Scan: Press ENTER to...
Page 27 - VGA Menu — To set up for computer; ADVANCED OPERATION — REMOTE CONTROL
ViewSonic N2652w 25 ENGLISH VGA Menu — To set up for computer It is only active in VGA source. • Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. • Contrast: To adjust contrast of the video. • Brightness: To adjust luminance of the video....
Page 30 - PIP Screen
ViewSonic N2652w 28 ENGLISH PIP/POP PIP/POP button allows you to watch two screens from different sources at the same time. (PIP is picture in picture; POP is picture out of picture) Press PIP/POP on the remote control repeatedly. The screen will change from normal screen → PIP screen → POP screen. ...
Page 32 - Specifications
ViewSonic N2652w 30 ENGLISH Other Information Specifications LCD Type Color Filter Glass surface 26” TFT Active Matrix RGB 0.4215 (H) x 0.4215 (V) mm pixel RGB vertical stripe Anti-Glare Input signal RGB RF Video Audio RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, f h : 30-80 kHz, f v :50-75 Hz T...
Page 33 - Troubleshooting
ViewSonic N2652w 31 ENGLISH Troubleshooting No power • Make sure the LCD TV is properly connected. • Make sure the AC power cord is properly connected. • Make sure the AC power is ON, DC power button is ON (Green LED). • Plug another electrical device (like a radio) to the power outlet to verify tha...
Page 34 - Customer Support; You will need the product serial number.; Region
ViewSonic N2652w 32 ENGLISH Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ Region Web Site T=Telephone F=Fax Email United States www.viewsonic.com/support/ T= (800) 688 6688 F= (909) 468...
Page 35 - Limited Warranty; VIEWSONIC
ViewSonic N2652w 33 ENGLISH Limited Warranty VIEWSONIC ® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warra...
