Page 2 - CONTENTS
CONTENTS Compliance information ----------------------------------------------- 1Important Safety Instructions ---------------------------------------- 2 Copyright Information-------------------------------------------------- 3 Product Registration--------------------------------------------------- ...
Page 3 - Compliance Information; • Consult the dealer or an experienced radio/TV technician for help.; FCC Warning; ViewSonic 1 N2060w
Compliance Information This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,...
Page 4 - Important Safety Instructions; ViewSonic 2 N2060w
Important Safety Instructions 1. Read these instructions completely before using the equipment.2. Keep these instructions in a safe place.3. Heed all warnings.4. Follow all instructions.5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this...
Page 5 - Copyright Information; Copyright © ViewSonic; Product Registration; ViewSonic LCD TV; environmental laws of your location.; ViewSonic 3 N2060w
Copyright Information Copyright © ViewSonic ® Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissio...
Page 6 - Antenna Installation Instructions; Cleaning the LCD TV; Disclaimer; ViewSonic 4 N2060w
Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical...
Page 7 - FRONT PANEL CONTROL KNOBS; Volume; CONNECT PERIPHERAL EQUIPMENT; ViewSonic 5 N2060w
FRONT PANEL CONTROL KNOBS Source : ① Press to select your input source. Volume ②③ : Press to confirm your function selection (when the OSD main menu displayed) or adjust volume (without OSD main menu) Channel : ④⑤ Select the intended function by pressing the two keys (when the OSD main menu displaye...
Page 8 - PREPARATION; Lay the LCD TV with the screen down on a table, as it will be easier; ViewSonic 6 N2060w; The following connection diagrams show you how to connect them.
PREPARATION Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take precaution on page9 not to damage the screen. 1. VGA audio input 2. VGA input 3. AC power input terminal 4. Headphone outlet 5. AV signal input 6. Left audio track input...
Page 9 - USE OF THE REMOTE CONTROL; CH; OPERATING INSTRUCTIONS; ViewSonic 7 N2060w
USE OF THE REMOTE CONTROL CAPTION Press this button to turn on Closed Caption. Be sure you have selected Caption On in the Setup menu. SIZE Press this button to change display size. POWER Press to turn on/off the TV. The TV is never completely powered off unless it is physically unplugged. 0~9/100 D...
Page 10 - ViewSonic 8 N2060w; CAUTION; in cracking or leakage, which may pose a fire risk or
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). ViewSonic 8 N2060w CAUTION Only use the specified AAA batteries.Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal inju...
Page 11 - you could find from the accessory box. Shown in the figures below:; middle first, then the; ViewSonic 9 N2060w
1. Assembly Take out TV and base from carton, assembled by three pieces screws, which you could find from the accessory box. Shown in the figures below: PREPARATION Note : Lock the screw middle first, then the others, to avoid holes aiming incorrectly Place the base on a solid surface ViewSonic 9 N2...
Page 13 - TO USE THE MENUS; MENU
TO USE THE MENUS 1. Press the MENU button to display or close main menu. 2. Use the cursor up/down to select a menu item. 3. Use the cursor left/right to enter a submenu or enable/disable the function. 4. Press the MENU button to exit the menu. MAIN MENU Press the MENU button to enter the main OSD (...
Page 14 - Sound Setup; Select “ON” or “OFF” in sound selection to control the sound output.
When the input source is TV mode, could select the Sound Setup, Picture Setup, Child Lock Setup, Function Setup and TV Setup. Shown in the figure below: Sound Setup (Same in PC, TV, AV, S-Video and Components modes) 1. The range of volume, bass and treble is 0~100. 2. Select “ON” or “OFF” in sound s...
Page 15 - Picture Setting; Green, Blue can be adjusted) and Reset to Default. Shown in the figure; ViewSonic 13 N2060w
Picture Setting When the input source is in PC mode, you can select Brightness, Contrast, Position, Video noise, Sharpness, Auto Adjust, Info, Color Temp., （ Red, Green, Blue can be adjusted) and Reset to Default. Shown in the figure below: 1. Brightness and Contrast: Could adjust from 0 to 100. 2. ...
Page 16 - ViewSonic 14 N2060w
When the input source is in TV/AV/S-VIDEO/YPbPr mode, you can select Brightness, Contrast, Color, Sharpness, Hue, Dyn. Skin Tone, Color Temp., Zoom and Reset to Default respectively; shown in the figure below: 1. Brightness and Contrast: Could adjust from 0 to 100 to adjust the luminance of picture....
Page 17 - Function Setup; OSD Time Out: Could set OSD display time from 10 seconds to 60; ViewSonic 15 N2060w
Function Setup When the input source is in TV, AV or S-Video mode, you can select OSD Time Out, Language, Child lock, Sleep Timer, CC Mode and Reset to Default. Shown in the figure below: 1. OSD Time Out: Could set OSD display time from 10 seconds to 60 seconds 2. OSD language setting: Three languag...
Page 18 - similarly as the above instructions; Child Lock; you to enter password:; ViewSonic 16 N2060w
OSD Time Out, Language, Sleep Timer and Reset to Default options are operated similarly as the above instructions Child Lock When the input source is in TV, AV or S-Video mode, V-Chip level can be set. You can enter the Child Lock setting only when the Child Lock is ON. When you enter the Child Lock...
Page 19 - The empty box refers to unlocked the solid box refers to locked.; TV Setting; The following menu appears only in the TV mode.; ViewSonic 17 N2060w
The empty box refers to unlocked; the solid box refers to locked. TV Setting The following menu appears only in the TV mode. 1. Channel No.: Shows the current channel number. 2. Tuning Mode: Select the mode of TV signal - Cable\HRC Cable\IRC Cable\ Broadcast. 3. System Standard: NTSC-M 4. Auto Searc...
Page 20 - ViewSonic 18 N2060w
channels that have been located are stored. If you would like to stop "Auto Search" during the process, press the function button. 5. Fine Tuning: NTSC-M is seldom used. 6. AFC can be set to ON or OFF. When it is set to ON, the TV will search the TV signal automatically; when there is any of...
Page 21 - Care of the screen
HEADPHONE 1. The headphone jack is located at the right side of the TV. 2. The MUTE key on the remote control works on both internal speaker and the headphone. 3. Use volume key to adjust the volume. TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar,...
Page 22 - ViewSonic 20 N2060w
Appendix Specifications Panel Type 20” TFT-LCD Active Matrix wide-XGA, 1360x 768 Color Anti-glare coating Viewing angles 160° H/ 160° V Input signal Video Fh: 32-48KHz, Fv: 50-60Hz VGA input*1 TV system antenna Composite Video input*1 S-Video*1 Component video*1 (YPbPr / YCbCr) Audio Audio input*1 R...
Page 23 - Preset timing modes; : Do not set the graphics card in your computer to exceed these; Note; : Product specifications are subject to change without notice; ViewSonic 21 N2060w
Dimension Physical 521.84mm(W)x419.52mm(H)x180.83mm(D) 20.55”(W) x 16.52”(H) x 7.12”(D) Package 595mm(W) x 512mm(H) x 226mm(D) 23.4”(W) x 20.2”(H) x 8.9”(D) Weight Net 6.9Kg (15.2 Ib.) Gross 9 Kg (19.9 Ib.) Regulation CB, FCC,UL/cUL, NOM Power saving On <90 W (Blue LED) Modes Active off <3 W P...
Page 24 - Troubleshooting; ViewSonic 22 N2060w
Troubleshooting No power • Make sure the LCD TV is properly connected. • Make sure the AC power cord is properly connected. • Make sure the AC power is ON, DC power button is ON (Green LED). • Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying th...
Page 25 - Cusomer Support; You will need the product serial number.; Region; ViewSonic 23 N2060w
Cusomer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ Region Web Site T=Telephone F=Fax Email United States www.viewsonic.com/support/ T= (800) 688 6688 F= (909) 468 1202 [email protected]...
Page 26 - Limited Warranty; VIEWSONIC; ViewSonic 24 N2060w
Limited Warranty VIEWSONIC ® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will a...
