Page 2 - Table of Contents
Table of Contents Preface................................................................................................... iv Compliance Information ..................................................................................... iv Important Safety Instructions .................................
Page 5 - Preface; Compliance Information
ViewSonic VPC100 iv Preface Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference th...
Page 7 - Important Safety Instructions
ViewSonic VPC100 vi Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric s...
Page 8 - Declaration of RoHS Compliance
ViewSonic VPC100 vii Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and...
Page 9 - Copyright Information
ViewSonic VPC100 viii Copyright Information Copyright © ViewSonic ® Corporation, 2009. All rights reserved. Microsoft ® , Windows ® , Windows NT ® , and the Windows ® logo are registered trademarks of Microsoft ® Corporation in the United States and other countries. ViewSonic ® , the three birds log...
Page 10 - Product Registration; For Your Records
ViewSonic VPC100 ix Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic. com. The ViewSonic ® Wizard CD-ROM also provides an opportunity for you to print the registra...
Page 11 - Specifications
ViewSonic VPC100 x Specifications Processor Intel ® Atom™ N280 1.66GHz Single Core, FSB, 667MHz Operating System Microsoft ® Windows XP Home Chipset North Bridge: Intel ® 945GSE Chipset South Bridge: Intel ® ICH7M Chipset Memory 1 DDR2 SO-DIMM slotSupports DDR2 400/533 SDRAM (200-Pin/1.8V)Max. memor...
Page 12 - Chapter 1
ViewSonic VPC100 1 Congratulations on your purchase of the ViewSonic ® VPC100 All-In-One PC! The VPC100 All-in-One PC is engineered for powerful computing performance. Unlike conventional computers, this All- in-One PC is portable and can be easily moved anytime, anywhere. With its built-in componen...
Page 13 - Getting Started; Package Contents
ViewSonic VPC100 2 Getting Started Package Contents The following items come with your package. If any of them is damaged or missing, please contact your retailer. All-in-One PC Stand Power adapter Power cord ViewSonic Wizard CD System Recovery and Driver Disk Quick Start Guide Keyboard Mouse NOTE K...
Page 14 - Features; Space saver; High video quality; Mountable
ViewSonic VPC100 3 Getting Started Features All-in-one The functionality of a standard multiple-parts computer and its monitor are combined together in this all-in-one PC. With a built-in card reader, an optical disc drive, and I/O ports, you can connect various peripherals to maximize computer perf...
Page 15 - System Overview; Front View
ViewSonic VPC100 4 Getting Started System Overview Front View 2 1 3 4 5 No. Item Description 1 Webcam Use for taking pictures, recording videos, and video conferencing. 2 Microphone Use for chatting and other interactive applications. 3 LCD display Provides visual output on a 1366x768 resolution dis...
Page 16 - Rear View
ViewSonic VPC100 5 Getting Started Rear View No. Item Description 1 Cooling vent Used for air convection to prevent the All-in-One from overheating. Do not cover the cooling vent . 2 Power jack inlet Use to connect the power adapter. 3 Stereo speakers Output high quality sound with Hi-Fi function. 4...
Page 17 - Side Views
ViewSonic VPC100 6 Getting Started Side Views XD SD MMC MS No. Item Description 1 Optical disk drive Plays or records DVD or CD disk 2 USB ports Connect USB devices such as a mouse, keyboard, printer, scanner, and other peripherals. 3 Card reader port Supports memory cards including XD (eXtreme Digi...
Page 18 - This chapter will guide you in installing; Chapter 2
ViewSonic VPC100 7 This chapter will guide you in installing necessary and additional components to maximimize the system performance of your All-in-One PC. The following topics are covered: Attaching the StandTilting the ScreenRemoving the StandConnecting PS/2 ® Devices Connecting the PowerConnecti...
Page 19 - Installation; Tilting the Screen; Removing the Stand
ViewSonic VPC100 8 Installation Tilting the Screen After installing the stand, the screen can be tilted about 20 o to suit the user’s preference. A B Removing the Stand Should there be a need to detach the stand (i.e., for wall mounting), follow the steps below: Lay the All-in-One PC on flat and sta...
Page 20 - Devices; Keyboard
ViewSonic VPC100 9 Installation Connecting PS/2 ® Devices You can connect a keyboard and a mouse using the PS/2 ® ports on the rear of your All-in-One PC. Before making any connections, ensure that the All-in-One PC is turned off. Connecting a PS/2 ® Keyboard Plug the keyboard’s PS/2 ® cable into th...
Page 21 - Connecting the Power; Connecting Audio Components; Connecting the Headset; Connecting a Microphone
ViewSonic VPC100 10 Installation Connecting the Power Connect the power adapter to the power jack of the All-in-One PC.Connect the power cord to the power adapter.Plug the power cord into an electrical outlet. 1.2.3. NOTE When disconnecting the power, always unplug the power cord from the electrical...
Page 22 - Connecting USB Devices
ViewSonic VPC100 11 Installation Connecting USB Devices Your All-in-One PC has four USB ports, two ports are located at the rear (see picture on the right) and two at the right side of the All- in-One PC.Use these ports to connect USB devices, such as a printer, scanner, keyboard, mouse, USB memory ...
Page 23 - This chapter describes some of the basic; Chapter 3
ViewSonic VPC100 12 This chapter describes some of the basic All-in-One PC operations. The following topics are covered: Using the Power ButtonUsing the Card ReaderUsing the Optical Disc DriveUsing the Keyboard •••• Chapter 3 Operating
Page 24 - Operating; Using the Power Button; Using the Card Reader; Inserting the card
ViewSonic VPC100 13 Operating Using the Power Button Turning On the All-in-One PC Press the power button to turn on your All-in-One PC. WARNING Turning off your computer before it fully boots, may cause an error the next time you turn on your All-in-One PC. Turning Off the All-in-One PC In Windows X...
Page 25 - Using the Optical Disc Drive; Inserting a Disc; Using the Keyboard; Hot keys
ViewSonic VPC100 14 Operating Using the Optical Disc Drive Inserting a Disc Press the eject button on the disc tray.Pull the tray out.With the disc label side up, place the disc on the center of the tray and snap into place.Gently push the tray back into the drive. Removing a Disc Press the eject bu...
Page 26 - Chapter 4
ViewSonic VPC100 15 BIOS Setup Utility is a program for configuring the BIOS (Basic Input/Output System) settings of the computer.BIOS is a layer of software called firmware that translates instructions from other layers of software into instructions that the computer hardware can understand. The BI...
Page 27 - BIOS Setup Utility; When to Use the BIOS Setup Utility; Moving Around and Making Selections
ViewSonic VPC100 16 BIOS Setup Utility When to Use the BIOS Setup Utility You need to run the BIOS Setup Utility when: You see an error message on the screen requesting you to run Setup.You want to restore the factory default settings.You want to modify some specific settings of the hardware.You wan...
Page 29 - Main Menu; Advanced Menu
ViewSonic VPC100 18 BIOS Setup Utility Main Menu The Main menu lets you adjust the system time and date. It also displays the processor, memory and BIOS version information. To adjust the time, go to System Time . To adjust the date, go to System Date . Press [Tab ] or [Shift Tab] to go to the next ...
Page 33 - Boot Menu
ViewSonic VPC100 22 BIOS Setup Utility Boot Menu The Boot menu lets you configure settings and the boot sequence to follow when the system boots up. NOTE The available sub-menu options may vary depending on the installed devices on your All-in-One PC.
Page 36 - Security Menu
ViewSonic VPC100 25 BIOS Setup Utility Security Menu The Security menu displays the security settings and lets you set up and change the supervisor or user password. Available options on this screen may vary depending on the type of passwords set. Supervisor Password The Supervisor can access and ch...
Page 38 - Chipset Menu
ViewSonic VPC100 27 BIOS Setup Utility Chipset Menu The Chipset menu lets you configure the chipset registers and optimize your system’s performance. It consists of the following sub-menu: WARNING If you are not familiar with chipset settings, it is recommended to use the default configuration. Sett...
Page 40 - Exit Menu
ViewSonic VPC100 29 BIOS Setup Utility Exit Menu The Exit menu lets you save or discard any modifications made to the BIOS or load system default values. Save Changes and Exit Select this option to save modified settings and exit BIOS. Discard Changes and Exit Select this option to exit BIOS without...
Page 41 - Chapter 5
ViewSonic VPC100 30 Your All-in-One PC supports system recovery to enable users to restore the system to its default settings. This function is useful in the event of a system failure or when you forget system passwords. This chapter covers the following topics: When to Use System RecoveryRunning Vi...
Page 42 - System Recovery; When to Use System Recovery
ViewSonic VPC100 31 System Recovery When to Use System Recovery You need to run system recovery: In the event of a system or hardware failure.You need to restore the system back to its default settings.You forgot the system password. System recovery will format the hard disk and restore the system t...
Page 44 - How to Create the System Recovery Disk
ViewSonic VPC100 33 System Recovery How to Create the System Recovery Disk For the first-time use, it is required for you to create a system recovery disk as the backup solution for any accidents. Before moving forward, please make sure your system booting setup is complete and go over the following...
Page 47 - This chapter lists some common problems that; Chapter 6
ViewSonic VPC100 36 This chapter lists some common problems that you may encounter when using your All-in-One PC and describes solutions on how to solve them. Chapter 6 Troubleshooting
Page 48 - Troubleshooting
ViewSonic VPC100 37 Troubleshooting My All-in-One PC does not start. Check that the All-in-One PC is connected to an electrical outlet and it is turned on.Check that the power cord and all cables are connected firmly. When I turn on my computer, the message “Operating system not found” appears or Wi...
Page 49 - I cannot play a DVD-ROM; My speakers have no sound
ViewSonic VPC100 38 Troubleshooting I cannot play a DVD-ROM If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you are trying to play is incompatible with the DVD-ROM drive in your All-in-One PC. The region code is listed on the disc’s packaging.If you h...
Page 50 - My microphone does not work; My mouse does not work
ViewSonic VPC100 39 Troubleshooting My microphone does not work For webcam built-in microphone, please go to Start > Control Panel > Sounds and Audio Devices > Audio to check if it is muted.If you are using an external microphone, check that the microphone is plugged into the Microphone con...
Page 51 - Chapter 7; Customer Support
ViewSonic VPC100 40 Chapter 7 Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = TelephoneF = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 18...
Page 52 - Limited Warranty
ViewSonic VPC100 41 Limited Warranty VIEWSONIC ® ALL-IN-ONE PC What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSoni...
Page 54 - Appendix; version
ViewSonic VPC100 43 Appendix VPC100 Bundle Software NTI (New Tech Infosystems, Inc.) Media Maker OEM version For contacts about third-party software products, see the following. Website: http://www.ntius.com/default.asp Operation manual: click for more details
