ViewSonic VP2650WB - Manual

ViewSonic VP2650wb 2 Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric ...

ViewSonic VP2650wb 3 Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC ofthe European Parliament and the Council on restriction of the use of certain hazardoussubstances in electrical and electronic equipment (RoHS Directive) and i...

ViewSonic VP2650wb 4 Copyright Information Copyright © ViewSonic ® Corporation, 2008. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States...

ViewSonic VP2650wb 5 Getting Started Congratulations on your purchase of a ViewSonic ® LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windo...

ViewSonic VP2650wb 6 Quick Installation 1. Connect power cord (and AC/DC adapter if required) 2. Connect video cable • Make sure both the LCD display and computer are turned OFF • Remove rear panel covers if necessary • Connect the video cable from the LCD display to the computer Macintosh users: Mo...

ViewSonic VP2650wb 7 Landscape/Portrait Modes The LCD display can operate in either Landscape or Portrait mode.Follow the instructions that accompany the Perfect Suite TM software. Note: Before using the portrait display mode, first install the Perfect Suite softwareincluded with your LCD display.Pe...

ViewSonic VP2650wb 9 Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image andminimizing eye strain. The timing mode consists of the resolution (example 1920 x 1200) and refresh rate (or vertical frequency; example 60 Hz). A...

ViewSonic VP2650wb 10 Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The OSD controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 12. Main Menu with OSD controls F...

ViewSonic VP2650wb 11 Do the following to adjust the display setting: 1. To display the Main Menu, press button [1]. NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2. To select a control...

ViewSonic VP2650wb 12 Main Menu Controls Adjust the menu items shown below by using the up S and down T buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. N...

ViewSonic VP2650wb 13 Control Explanation 7500K- Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 6500K- Adds red to the screen image for warmer white and richer red. 5000K- Adds red to the screen image for warmer white and richer red. User Col...

ViewSonic VP2650wb 16 Other Information Specifications 1 Macintosh computers older than G3 require a ViewSonic ® Macintosh adapter. To order an adapter, contact ViewSonic. LCD Type Color FilterGlass Surface 26” (full 25.5" wide viewable diagonal area),TFT (Thin Film Transistor), Active Matrix WU...

ViewSonic VP2650wb 17 Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but...

ViewSonic VP2650wb 18 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = TelephoneF = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818NZ= 0800 008 822...

ViewSonic VP2650wb 19 Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If the screen still not ...

ViewSonic VP2650wb 20 Limited Warranty VIEWSONIC ® LCD DISPLAY What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warran...

ViewSonic VP2650wb 22 Mexico Limited Warranty VIEWSONIC ® DISPLAY PRODUCTS What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship durin...