ViewSonic VP230MB - Manual

Quick Installation 1 Connect video cable Make sure both the ViewPanel ® and computer are powered OFF. Connect the VGA analog video cable to thecomputer then to the ViewPanel. Bothanalog and digital (DVI) ports are availableon the back of the ViewPanel for yourconvenience. The DVI cable requires a DV...

Mounting Options Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer tothe instructions that come with the wall mounting kit. To convert your ViewPanel from a desk-mounted to a wall-mounted display, do the following: Installation of Base...

Using the ViewPanel Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screenimage and minimizing eye strain. The timing mode consists of the resolution (example 1600 x 1200) and refresh rate (or vertical frequency--example 60 Hz). After setting the timing...

Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OnView ® controls from ViewSonic ® . The controls are explained in the steps at the top of the next page and are further explained in the menu controls, pages 8 - 11. Front Control Panelshown below Power ...

Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. From the Main Menu you canalso navigate to the other menus shown below: NOTE: All OnView menus and adjustment screens disappear automatically after about 10 seconds (default). This time can be changed on the O...

Color Adjust provides two color adjustment modes: Color Temperature Select as shown below and User Color. ColorTemperature Select allows you to choose a preset colortemperature. User Color allows you to make individualadjustments for red, green, and blue (RGB). 9300K — Adds blue to the screen image ...

Other Information Specifications 1 Macintosh computers older than G3 require a ViewSonic ® , Macintosh adapter. To order an adapter, contact ViewSonic. LCD Type Color FilterProtective shield 23.1" full viewable diagonal area, TFT (Thin FilmTransistor), Active Matrix XGA LCD,RGB ver tical stripeA...

Troubleshooting No power • Make sure power button (or switch) is ON.• Make sure A/C power cord is securely connected to the DC power supply and the power supply is firmly connected to the ViewPanel ® . • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is...

Customer Support For the most expedient answer to your question, do the following: 1. Check Troubleshooting (on the previous page). 2. For assistance contact your reseller. 3. For further assistance see the contact information listed below. If contact information for your country or region is not li...

Cleaning the ViewPanel • MAKE SURE THE VIEWPANEL ® IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust andother particles. 2 If still not clean, apply a small amount of non-amm...

Limited Warranty VIEWSONIC LCD VIEWPANEL ® What the warranty covers: ViewSonic ® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warrantyperiod, ViewSonic will, at its sole...

Appendix Safety Guidelines CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is cer tified for the individual country. Some examples are listed below: IMPORTAN...

Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to par t 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-dential installation. This equipment generat...