Page 2 - Compliance Information; FCC Statement
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired op...
Page 3 - Important Safety Instructions; manufacturer’s instructions.
Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this unit near water.6. Clean with a soft, dry cloth.7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s inst...
Page 4 - Declaration of RoHS Compliance; Substance; Examples of exempted components are:
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply ...
Page 5 - Copyright Information; Copyright; Product Registration; Wizard D; For Your Records; ViewSonic DLP Projector
Copyright Information Copyright © ViewSonic ® Corporation, 20 10 . All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countrie...
Page 6 - Notes on the AC Power Cord
EN-3 Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector.Please confirm your AC plug type with the graphics below and ensure that the properAC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet,please contact your ...
Page 7 - CONTENTS
EN-4 CONTENTS Introduction ........................................................................................................5 Projector Features ....................................................................................................... 5Package Contents .............................
Page 8 - Introduction; Projector Features
EN-5 Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendlydesign to deliver high reliability and ease of use.The projector offers the following features: Single chip 1.397cm / 0.55" Texas Instruments DLP ® technology XGA (10...
Page 9 - Package Contents; Optional accessories
EN-6 Package Contents When you unpack the projector, make sure you have all these components: Optional accessories Projector with Lens Cap AC Power Cord Remote Control (IR) & batteries Projector Carrying Case VGA Cable (D-SUB to D- SUB ) ViewSonic CD Wizard Quick Start Guide RS232 cableP/N: J255...
Page 10 - Projector Overview; Front View
EN-7 Projector Overview Front View Lens cap Elevator button Speaker Lens cap strap Focus ring Projection lens Control panel Front IR remote control sensor Lamp cover Ventilation holes (intake) 1 7 2 8 3 9 4 10 5 6 10 9 1 3 5 4 7 6 2 8
Page 12 - Using the Product; Control Panel; LED
EN-9 Using the Product Control Panel LED Button Function Power (Power LED indicator) Refer to “LED Indicator Messages”. TEMP (Temperature LED indicator) Refer to “LED Indicator Messages”. LAMP (Lamp LED indicator) Refer to “LED Indicator Messages”. / Keystone Manually correct distorted images result...
Page 13 - Connection Ports
EN-10 Connection Ports LAN For network control. USB This connector is for firmware update and mouse function support. VIDEO Connect composite video output from video equipment to this jack. S-VIDEO Connect S-Video output from video equipment to this jack. MONITOR OUT Connect to a computer display, e...
Page 14 - Remote Control
EN-11 Remote Control POWER Turn the projector on or off. VGA1 Select analog RGB signal from COMPUTER IN 1 terminal. Source Manually select an input source. Enter Confirmed selections. Keystone+ / - Adjust image distortion caused by tilting the projector. ViewM Switch in between high brightness perfo...
Page 15 - Installing the Batteries; Caution
EN-12 Installing the Batteries 1. Open the battery cover in the direction shown. 2. Install batteries as indicated by the diagram inside the compartment. 3. Close the battery cover into position. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries acc...
Page 16 - Remote Control Operation
EN-13 Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear 10 15 7m 5m 5m 10 15 7m 5m 5m Do not point the laser directly to the people's eyes (especially small children)....
Page 17 - Installation; Connecting the Projector
EN-14 Installation Connecting the Projector USB Cable VGA (D-Sub) to HDTV (RCA) Cable VGA Cable (D-Sub to D-Sub) Composite Video Cable RS-232 Cable S-Video Cable Audio Cable Internet Cable 1 5 2 6 3 7 4 8 2 2 1 4 Desktop type Laptop type 2 3 5 5 6 7 8 4 WPG-350 4 When connecting cable, power cords...
Page 18 - Powering On/Off the Projector; Powering On the Projector:; SOURCE; Powering Off the Projector:
EN-15 Powering On/Off the Projector Powering On the Projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. Press button to turn on the projector. The projector takes a minute or so to warm up. 4. Turn on your source (computer, notebo...
Page 19 - Adjusting the Projector; Adjusting the Projector Height
EN-16 Adjusting the Projector Adjusting the Projector Height The projector is equipped with an elevator foot to adjust the image height.To raise or lower the image:1. To raise or lower the image, press the elevator button and raise or lower the frontof the projector. Release the button to lock the a...
Page 20 - Adjusting Projection Image Size
EN-17 Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. Keep a space of 30 cm or more between the sides o...
Page 21 - Menu Operation
EN-18 Menu Operation The projector has multilingual on-screen display menus that allow you to make imageadjustments and change a variety of settings.
Page 23 - How to operate
EN-20 How to operate 1. Press the MENU button to open the OSD menu. 2. When OSD is displayed, use S / T to select any feature in the main menu. 3. After selecting the desired main menu item, press X to enter sub-menu for feature setting. 4. Use S / T to select the desired item and adjust the setting...
Page 28 - Network Control; There are two ways to connect to the network control:
EN-25 Network Control This feature provides the ability to remotely control and manage the projector throughthe network. Preparation: 1. Connect one end of the internet cable to the Network Control connector on the projector. 2. Connect the other end of the internet cable to an available RJ-45 conne...
Page 30 - Connections > Local Area Connection
EN-27 B. Manual IP address setting (DHCP: No): 1. Set IP Address and Subnet Mask under Network Config. IP Address: Numerical address to identify networked computers. Subnet Mask: A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Add...
Page 31 - Properties; OK
EN-28 3. Select " Intel Protocol (TCP/IP) " and click " Properties ". 4. Set your PC’s IP address, and click OK . Click "Use the following IP address" The network address portion included in the IP address set into your PC should be common with projector’s one. In this ...
Page 33 - Control the projector via a web browser
EN-30 Control the projector via a web browser LoginIf the administrator and user passwords are disabled, it will directly go into theStatus page.
Page 34 - Authority on the network control of Administrator & User:
EN-31 If the Administrator & User passwords are enabled, select your User Name andenter password to login. Authority on the network control of Administrator & User: Item Description Administrator User Status Show current projector status and network configuration settings. v v Control Contro...
Page 35 - Status
EN-32 Status All screen images in this manual are shown when you login with the Administrator ID.The image will differ if you login with User ID. Remark: * If the power has not been supplied for over 36 hours, date and time will be reset. Item Description IP Address Show current IP address. MAC Addr...
Page 36 - Control
EN-33 Control Item Description Basic Power Switch Power On or Power Off the projector via network. Input Source Select input source. Date Show date set on current projector. Time Show time set on current projector * . Volume Adjusts the volume setting. (0 - 20) Mute Enable or disable the mute functi...
Page 38 - Network Setting
EN-35 Network Setting Click “Submit” button to save the settings. Item Description Network DHCP Assign an IP address to the projector from the DHCP server automatically or manually. IP Address Setup IP address when DHCP is disable. Subnet Mask Setup subnet mask when DHCP is disable. Gateway Setup ga...
Page 39 - Alert
EN-36 Alert Click “Submit” button to save the settings, then click “Issue Test Mail” to send a test mailto check whether all settings and functions are correct. Item Description Email Setting To Setup the mail alert attendee. (Max length: 40 characters) Cc Setup the backup mail alert attendee. (Max ...
Page 40 - Schedule
EN-37 Schedule The schedule function is divided into two scheduling categories, as shown below:Weekly Schedule: defines the date of each week will execute the command Click “Add” button to create new schedule. To delete schedule, click “Cancel”. SpecificDay: defines the month and day that will execu...
Page 41 - Tips for solving web page problems:
EN-38 Tips for solving web page problems: If your web page is not running smoothly, please follow below steps to set the browser.1. Go to Tools > General and click "Settings".
Page 43 - Maintenance; Warning; Cleaning the Lens
EN-40 Maintenance The projector needs proper maintenance. You should keep the lens clean as dust, dirtor spots will project on the screen and diminish image quality. If any other parts needreplacing, contact your dealer or qualified service personnel. When cleaning any partof the projector, always s...
Page 44 - Replacing the Lamp
EN-41 Replacing the Lamp As the projector operates over time, the brightness of the projector lamp graduallydecreases and the lamp becomes more susceptible to breakage. We recommendreplacing the lamp if a warning message is displayed. Do not attempt to replace thelamp yourself. Contact the qualified...
Page 46 - Specifications
EN-43 Specifications Display system Single 1.397cm / 0.55" DLP panel Resolution XGA (1024 × 768) F/No. 2.83 Focal length 7.73mm Screen size 101.6cm ~ 762cm / 40” – 300” Lamp 230W Input terminal D-Sub 15-pin x 2, S-VIDEO x 1, VIDEO x 1, Audio signal input (3.5 mm stereo mini jack) x 2 Output term...
Page 47 - Appendix; LED Indicator Messages
EN-44 Appendix LED Indicator Messages LED Type Color Status Meaning Power LED Blue Solid (LED x 1) The projector is in standby mode. Lamp LED Off Off Temp LED Off Off Power LED Blue Solid (LED x 2) Powering up Lamp LED Off Off Temp LED Off Off Power LED Blue Solid (LED x 2) Normal operation Lamp LED...
Page 48 - Compatibility Modes
EN-45 Compatibility Modes Computer: Compatibility Resolution H-Sync [KHz] V-Sync [Hz] VGA 640 x 480 24.6 50.0 31.5 59.9 37.9 72.8 37.5 75.0 43.3 85.0 640 x 480 @ 120Hz 61.9 119.5 720 x 400 31.5 70.0 37.9 85.0 SVGA 800 x 600 31.0 50.0 35.2 56.0 37.9 60.3 48.1 72.0 46.9 75.0 53.7 85.1 76.3 120.0 800 x...
Page 50 - Troubleshooting; Image problems; Remote control problems
EN-47 Troubleshooting Refer to the symptoms and measures listed below before sending the projector forrepairs. If the problem persists, contact your local reseller or service center. Pleaserefer to "LED Indicator Messages" as well. Start-up problems If no lights turn on: Be sure that the p...
Page 51 - RS-232 Command and Configuration
EN-48 RS-232 Command and Configuration Baud Rate:19200 Parity Bit:none Data Bit:8 Stop Bit:1 Assign Port:COM1 Name Operation type CRC Header Command Response Power ON BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00 06 OFF BE, EF, 03, 06, 00, DC, DB, 69, 00, 00, 00, 00, 00 06 Source Computer (Anal...
Page 52 - Wire List
EN-49 D-Sub 9 pin 1 1 CD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Wire List C1 COLOR C2 1 Black 1 2 Brown 2 3 Red 3 4 Orange 4 5 Yellow 5 6 Green 6 7 Blue 7 8 Purple 8 9 White 9 SHELL DW SHELL
Page 53 - IR Control Code
EN-50 IR Control Code Key Format Byte1 Byte2 Byte3 Byte4 Power NEC 83 F4 13 87 Source NEC 83 F4 13 02 Up NEC 83 F4 13 82 Down NEC 83 F4 13 85 Left NEC 83 F4 13 83 Right NEC 83 F4 13 81 MENU NEC 83 F4 13 84 Auto NEC 83 F4 13 64 Mouse NEC 83 F4 13 6B ViewMatch NEC 83 F4 13 63 Freeze NEC 83 F4 13 80 En...
Page 54 - Customer Support; You will need the product serial number.
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Web Site T=TelephoneF=Fax E-mail Australia/New Zealand www.viewsonic.com.au AUS=1800 880 818NZ=0800 008 822 [email protected]...
Page 55 - Limited Warranty; VIEWSONIC; What the warranty covers:; warranty information.; Who the warranty protects:; This warranty is valid only for the first consumer purchaser.; What the warranty does not cover:; b. Operation outside of product specifications.
Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic wil...
Page 56 - Limitation of implied warranties:; Any claim against the customer by any other party.; Effect of state law:; contact ViewSonic or your local ViewSonic dealer.
h. Use of supplies or parts not meeting ViewSonic’s specifications. i. Normal wear and tear. j. Any other cause which does not relate to a product defect. 3. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact View...
Page 57 - Mexico Limited Warranty
Mexico Limited Warranty VIEWSONIC ® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSo...
