Page 2 - FCC Statement; For Canada; Compliance Information
i FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipmen...
Page 3 - ii; Important Safety Instructions
ii Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this unit near water.6. Clean with a soft, dry cloth.7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s i...
Page 4 - iii; Declaration of RoHS2 Compliance
iii Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/ EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to ...
Page 5 - iv; Copyright Information; For Your Records
iv Copyright Information Copyright © ViewSonic® Corporation, 2013. All rights reserved.Macintosh and Power Macintosh are registered trademarks of Apple Inc.Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries...
Page 6 - Table of contents; Magnifying and searching for details. 27
1 Table of contents Important safety instructions .......................2 Introduction ......................4 Projector features ................................. 4 Shipping contents ................................. 5 Projector exterior view ......................... 6 Controls and functions .......
Page 7 - Important safety instructions; Safety Instructions
2 Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety ...
Page 9 - Introduction; Projector features
4 Introduction Projector features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. • Dynamic PC and Dynamic Movie functions adjusting the power consumption of the l...
Page 10 - Shipping contents; Standard accessories
5 Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Optional access...
Page 11 - Projector exterior view
6 Projector exterior view 1. External control panel(See "Projector" on page 7 for details.) 2. Lamp cover 3. Vent (heated air exhaust) 4. Front IR remote sensor 5. Adjuster foot 6. Focus and Zoom rings 7. Projection lens 8. RS-232 control port 9. Type B USB port 10. HDMI port 11. RGB (PC)/Co...
Page 12 - Controls and functions; Projector
7 Controls and functions Projector 1. Focus ring Adjusts the focus of the projected image. 2. Zoom ring Adjusts the size of the image. 3. Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting from an angled projection. 4. Left/Blank Hides the screen picture. 5. POWER indic...
Page 13 - Remote control
8 Remote control To use the remote mouse control keys (Page Up, Page Down, , and ), see "Using the remote mouse control" on page 10 for details. 1. POWER Toggles the projector between standby mode and on. 2. Source selection keys (VGA/Video) Selects an input source for display. VGA Selects D...
Page 14 - Remote control code
9 Remote control code The projector can be assigned to two different remote control codes, A or B. When several adjacent projectors are in operation at the same time, switching the remote control codes can prevent interference from other remote controls. Set the remote control code for the projector...
Page 15 - Using the remote mouse control; Remote control effective range
10 Using the remote mouse control The capability of operating your computer with the remote control gives you more flexibility when delivering presentations. 1. Connect the projector to your PC or notebook with a USB cable prior to using the remote control in place of your computer’s mouse. See "...
Page 16 - Replacing the remote control batteries
11 Replacing the remote control batteries 1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on the cover and slide it in the direction of the arrow as illustrated. The cover will slide off. 2. Remove any existing batteries (if necessary) and install...
Page 17 - Positioning your projector; Choosing a location
12 Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the proje...
Page 18 - Projection dimensions
13 Projection dimensions Refer to "Dimensions" on page 60 for the center of lens dimensions of this projector before calculating the appropriate position. The "screen" mentioned below refers to the projection screen usually consisting of a surface and a support structure PJD5132/PJD5...
Page 20 - Connection
15 Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the ...
Page 21 - Connecting a computer or monitor; Connecting a computer; To connect the projector to a notebook or desktop computer:; Connecting a monitor; To connect the projector to a monitor:
16 Connecting a computer or monitor Connecting a computer The projector provides two VGA input sockets that allow you to connect them to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a not...
Page 22 - Connecting Video source devices; Best video quality; Better video quality; Connecting audio
17 Connecting Video source devices You can connect your projector to various Video source devices that provide any one of the following output sockets: • HDMI • Component Video • S-Video • Video (composite) You need only connect the projector to a Video source device using just one of the above conn...
Page 23 - Connecting an HDMI device; To connect the projector to an HDMI device:; Connecting a Component Video source device; To connect the projector to a Component Video source device:
18 If you have a separate sound system, you will most likely want to connect the audio output of your Video source device to that sound system, instead of to the mono audio projector. Connecting an HDMI device You should use an HDMI cable when making connection between the projector and HDMI devices...
Page 24 - Connecting an S-Video source device; To connect the projector to an S-Video source device:; Connecting a composite Video source device; To connect the projector to a composite Video source device:
19 Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to ...
Page 25 - Operation; Starting up the projector
20 Operation Starting up the projector 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). 2. Press POWER on the projector or remote control to start the projector. The POWER indicator light stays blue when the projector is on.(If necessar...
Page 26 - Using the menus
21 Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. The OSD screenshots below are for reference only, and may differ from the actual design. Below is the overview of the OSD menu. To use the OSD menus, please set them to your f...
Page 27 - Utilizing the password function; Setting a password
22 Utilizing the password function For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the On-Screen Display (OSD) menu. For details of the OSD menu operation, please refer to "Using the me...
Page 29 - Disabling the password function
24 Disabling the password function To disable password protection, go back to the SYSTEM SETTING: ADVANCED > Security Settings > Power On Lock menu after opening the OSD menu system. Select Off by pressing / . The message 'INPUT PASSWORD' is displayed. Enter the current password. • If the pass...
Page 30 - Switching input signal; Changing HDMI input settings
25 Switching input signal The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. Be sure the Quick Auto Search function in the SOURCE menu is On if you want the projector to automatically search for the signals. You can also manua...
Page 31 - Adjusting the projected image; Adjusting the projection angle; Fine-tuning the image clarity
26 • YUV : Sets the color space as YUV. • Auto : Sets the projector to detect the color space setting of input signal automatically. 3. Press to highlight HDMI Range and press / to select a suitable HDMI color range according to the color range setting of the output device connected. • Enhanced : Se...
Page 32 - Correcting keystone; DISPLAY; Magnifying and searching for details
27 Correcting keystone Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it f...
Page 33 - Selecting the aspect ratio
28 Selecting the aspect ratio The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. With the advent of digital signal processing, digital display devices like this projector can dynami...
Page 34 - About the aspect ratio
29 About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto : Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is s...
Page 36 - Optimizing the image; Selecting a picture mode; Picture modes for different types of signals
31 Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type. To select an operation mode that suits your need, you can follow one of the following steps. • P...
Page 37 - Setting the User 1/User 2 mode; Using Screen Color
32 4. Movie mode : Is suitable for enjoying dark movies or DVD movies best viewed in a blackened (little light) home cinema or lounge room environment. 5. Dynamic Movie mode : Is suitable for enjoying dark movies or DVD movies best viewed in a blackened (little light) home cinema or lounge room envi...
Page 39 - Color Management
34 4. T4: Makes images appear reddish white. *About color temperatures: There are many different shades that are considered to be "white" for various purposes. One of the common methods of representing white color is known as the “color temperature”. A white color with a low color temperatur...
Page 40 - Setting the presentation timer; To cancel the timer, perform the following steps:
35 Setting the presentation timer Presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer on the remote control to access the Presentation Timer menu or go to...
Page 41 - Hiding the image; Locking control keys; SYSTEM; menu; Freezing the image
36 Hiding the image In order to draw the audience's full attention to the presenter, you can use on the projector or Blank on the remote control to hide the screen image. Press any key on the projector or remote control to restore the image. The word ' BLANK ' appears at the lower right corner of th...
Page 42 - Using the CEC function; Using the 3D functions
37 To activate the High Altitude Mode : 1. Press MENU/EXIT on the projector or Menu on the remote control and then press / until the SYSTEM SETTING: ADVANCED menu is highlighted. 2. Press to highlight High Altitude Mode and press / to select On . A confirmation message is displayed. 3. Highlight Yes...
Page 43 - Using the projector in standby mode
38 2. Press to highlight 3D Settings and press MODE/ENTER on the projector or Enter on the remote control. 3. Press to highlight 3D Sync and press MODE/ENTER on the projector or Enter on the remote control. 4. Press to select a 3D Sync setting according to the table below and then press MODE/ENTER o...
Page 44 - Shutting down the projector
39 Active Audio Out Selecting On outputs an audio signal when the AUDIO IN and AUDIO OUT sockets are correctly connected to devices. Quick Power Off Selecting On enables the function and the projector will not enter the cooling process after being shut down. Selecting Off disables the function and t...
Page 45 - Menu operation; Menu system
40 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu item...
Page 49 - Description of each menu
44 Description of each menu Function Description Screen Color Corrects the projected picture’s color when the projection surface is not white. See "Using Screen Color" on page 32 for details. Aspect Ratio There are three options to set the image's aspect ratio depending on your input signal ...
Page 51 - HDMI Format; HDMI Range; Pattern; My Button
46 Function Description Quick Auto Search See "Switching input signal" on page 25 for details. HDMI Format See "Changing HDMI input settings" on page 25 for details. HDMI Range DynamicEco Timer Allows the projector to decrease the power consumption automatically if no input signal is...
Page 52 - Language; Splash Screen; CEC
47 Function Description Language Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 21 for details. Projector Position The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 12...
Page 53 - DCR; Audio Settings
48 Function Description High Altitude Mode A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 36 for details. DCR Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatic...
Page 54 - Reset Settings
49 Function Description Presentation Timer Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 35 for details. SecuritySettings See "Utilizing the password function" on page 22 for details. RemoteControl Code See ...
Page 55 - Maintenance; Care of the projector; Cleaning the lens; Cleaning the projector case; Storing the projector
50 Maintenance Care of the projector Your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whene...
Page 56 - Lamp information; Getting to know the lamp hour; Setting Lamp Mode as Economic
51 Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. To obtain the lamp hour information: 1. Press MENU/EXIT on the projector or Menu on the remote control and then press / until...
Page 57 - Timing of replacing the lamp; Status
52 Timing of replacing the lamp When the LAMP indicator light lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. CAUTION The L...
Page 58 - Replacing the lamp
53 Replacing the lamp To prepare a new lamp, contact your dealer and tell the lamp type number. Type number: RLC-078 (PJD5132/PJD5232L/PJD5134/PJD5234L) Type number: RLC-085 (PJD5533w) WARNING Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org • Be car...
Page 60 - Resetting the lamp timer
55 12. Restart the projector. CAUTION Do not turn the power on with the lamp cover removed. Resetting the lamp timer 13. After the startup logo, open the On-Screen Display (OSD) menu. 14. Go to the SYSTEM SETTING: ADVANCED > Lamp Settings menu. Press MODE/ENTER on the projector or ENTER on the re...
Page 61 - Indicators
56 Indicators Light Status & Description POWER TEMP LAMP Power events Blue Flashing Off Off Stand-by mode Blue Off Off Powering up Blue Off Off Normal operation Lamp events Purple Flashing Off Red The projector has shut down automatically. If you try to re-start the projector, it will shut down ...
Page 62 - Troubleshooting; The projector does not turn on.
57 Troubleshooting The projector does not turn on. No picture Blurred image Remote control does not work Cause Remedy There is no power from the power cord. Plug the power cord into the AC inlet on the projector, and plug the power cord into the power outlet. If the power outlet has a switch, make s...
Page 63 - Specifications; Projector specifications; General
58 Specifications Projector specifications • All specifications are subject to change without notice. • Not all models can be purchased in your region. General Product name DLP Projector Optical Resolution PJD5132/PJD5134 : 800 x 600 SVGA PJD5232L/PJD5234L : 1024 x 768 XGA PJD5533w : 1280 x 800 WXGA...
Page 66 - Timing chart; Supported timing for PC input
61 Timing chart Supported timing for PC input Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Frequency (MHz) Mode 720 x 400 31.469 70.087 28.3221 720 x 400_70 640 x 480 31.469 59.94 25.175 VGA_60 37.861 72.809 31.5 VGA_72 37.5 75 31.5 VGA_75 43.269 85.008 36 VGA_85 61.91 119.518...
Page 68 - Copyright information; Copyright
63 Copyright information Copyright Copyright 2012. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, ...
Page 69 - Appendix; IR control table; Code A
64 Appendix IR control table Code A Key Format Byte1 Byte2 Byte3 Byte4 Power NEC 83 F4 17 E8 Auto Sync NEC 83 F4 08 F7 VGA NEC 83 F4 41 BE Video NEC 83 F4 52 AD Source NEC 83 F4 04 FB Color Mode NEC 83 F4 10 EF Up / KeyS + NEC 83 F4 0B F4 Left NEC 83 F4 0E F1 Enter NEC 83 F4 15 EA Right NEC 83 F4 0F...
Page 70 - Code B
65 Code B RS232 command table <Pin assignment for this two end> Key Format Byte1 Byte2 Byte3 Byte4 Power NEC 83 F4 60 9F Auto Sync NEC 83 F4 63 9C VGA NEC 83 F4 64 9B Video NEC 83 F4 66 99 Source NEC 83 F4 7D 82 Color Mode NEC 83 F4 9E 61 Up / KeyS + NEC 83 F4 67 98 Left NEC 83 F4 69 96 Enter ...
Page 76 - Customer Support; You will need the product serial number.
71 Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 [email protected]...
Page 77 - Limited Warranty; ViewSonic
72 Limited Warranty ViewSonic ® Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic ...
Page 79 - Mexico Limited Warranty
74 Mexico Limited Warranty ViewSonic ® Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, Vie...
