ViewSonic PJ1165 - Manual

ViewSonic PJ1165 4 Part Names Projector Projector (Front/Right) Elevator buttonElevator footRemote sensorLens capLens The picture is projected from here.Filter cover An air filter is inside. Projector (Rear/Left) RGB portM1-D portBNC portAUDIO IN 1 portAUDIO IN 2 portCONTROL portNETWORK portAUDIO IN...

ViewSonic PJ1165 6 Setting Up Arrangement Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen. (±10%) Reference for the 4:3 aspect ratio Reference for the 16:9 aspect ratio WARNING • Bef...

ViewSonic PJ1165 7 Adjusting The Projector’s Elevator 1 Press and hold in the elevator buttons. 2 Raise or lower the project or to the desired height and then release the elevator buttons.When you release the elevator buttons, the elevator feet will lock into position. 3 As necessary, you can also f...

ViewSonic PJ1165 8 Connecting Your Devices NOTE • Some computers may have multiple display screen modes. Use of some of these modes may not be compatible with this projector. • For some RGB input modes, the optional Mac adapter is necessary.• When the image resolution is changed on a computer, depen...

ViewSonic PJ1165 9 Please refer to the following (for example) for connecting your devices. See the rear of the projector. You can see the ports. Examples of connection with a computer Computer Projector RGB out RGB cable Audio out Stereo Mini cable RS-232C cable CAT-5 cable RS-232C port Network por...

ViewSonic PJ1165 10 Examples of connection with a VCR/DVD Player VCR/DVD Player Projector Audio out (R) Audio out (L) Video out If using a s-video signal S-video out S-video cable Audio out (R) Audio out (L) If using a component signal CR/PR out CB/PB out Y out Audio out (R) Audio out (L) If using a...

ViewSonic PJ1165 11 Connecting to a monitor Connecting to a speaker (with amplifier) Connecting The Power Supply 1 Connect the connector of the power cord to the AC inlet of the projector. 2 Firmly plug the power cord’s plug into the outlet. WARNING • Use extra caution when connecting the power cord...

ViewSonic PJ1165 12 Remote Control About The Laser Pointer This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICATOR lights while the LASER button is pressed. Putting Batteries WARNING • The laser pointer of the remote control is used in place ...

ViewSonic PJ1165 13 Operating The Remote Control NOTE • Replace the batteries whenever the remote control starts to malfunction.• When strong lights, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hit the projector’s remote sensor, the rem...

ViewSonic PJ1165 14 Using The Mouse/Keyboard Control Function Using the USB control feature, you can use the remote control as a simplified mouse or keyboard of the computer.Connect the USB port of the projector to the computer via the USB cable. memo The USB control can be used with Windows 95 OSR ...

ViewSonic PJ1165 15 Power On/Off NOTE • Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices. Turning On The Power 1 Remove the lens cap. 2 Set the power switch to [ | ] (On).The STANDBY/ON indicator wil...

ViewSonic PJ1165 16 Operating Selecting An Input Signal 1 Select an input signal. Using the INPUT dial Turn the INPUT dial of the projector.Turning the dial cycles through the input ports as shown below. Select the signal you wish to project. Using SEARCH button Press the SEARCH button of the projec...

ViewSonic PJ1165 17 Selecting The Aspect Ratio 1 Press the ASPECT button to toggle between the modes for aspect ratio. At a M1-D signal memo NORMAL keeps the original aspect ratio of the input signal. At a RGB signal (not M1-D) At a video signal memo At a HDTV signal of 1125i or 750p, only 16:9 can ...

ViewSonic PJ1165 18 Adjusting The Picture Position memo This function is available only for RGB signals. Correcting The Keystone Distortion 1 Press the POSITION button.As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the picture position. 2 Use the cursor butto...

ViewSonic PJ1165 20 Freezing The Screen NOTE • If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long. Using The Magnify Feature 1 Press the F...

ViewSonic PJ1165 21 Displaying The Child Window memo This feature called “PinP (Picture in Picture)” is available only when a RGB signal is selected to main screen. Selecting An Audio Input memo This feature is available only when the child window is on the screen. 1 Press the PinP button.The child ...

ViewSonic PJ1165 22 Multifunctional Settings Using The Menu Functions This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, OPTION and NETW ORK. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. 1 Press the ...

ViewSonic PJ1165 23 MAIN Menu With the MAIN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item Description BRIGHT Adjust the brightness using the S / T buttons.: Light Dark CONTRAST Adjust the contrast using ...

ViewSonic PJ1165 27 INPUT Menu With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. (This table is continued to the following page.) Item Description COLOR SPACE Select a color space mode using the S ...

ViewSonic PJ1165 29 AUTO Menu With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. (This table is continued to the following page.) Item Description ADJUST Pressing the X (or the ENTER) button performs...

ViewSonic PJ1165 31 SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. (This table is continued to the following page.) Item Description BLANK Select a type of the BLANK screen using th...

ViewSonic PJ1165 33 OPTION Menu With the OPTION menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. (This table is continued to the following page.) Item Description VOLUME Adjust the volume using the S / T buttons...

ViewSonic PJ1165 35 NETWORK Menu This projector provides the NETWORK function. If you use this function, please set up the projector according to the Network environment in which you use it. memo When you use a Network suitable to the DHCP function, the following operation is not required commonly, ...

ViewSonic PJ1165 36 Network Setting Up This projector provides the NETWORK function. If you use this function, please consult your dealer for information.To start, connect the NETWORK port to a gateway device via a RJ-45 (10BASE-1) cable, then set up the projector according to the Network environmen...

ViewSonic PJ1165 37 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out , if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some ...

ViewSonic PJ1165 38 Replacing The Lamp If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible. 1 Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes. 2 Contact your dealer to prepare a new lamp. Tell the...

ViewSonic PJ1165 39 Air Filter Caring For The Air Filter The air filter should be cleaned about every 100 hours. If the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible. If the soiling will not come off the air filter, or it becomes damaged, then ...

ViewSonic PJ1165 40 Other Care Caring For The Inside Of The Projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Caring For The Lens 1 Turn off the projector, and unplug the power cord. 2 Lightly wipe the len...

ViewSonic PJ1165 41 Troubleshooting Related Messages When the projector power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same mess age is displayed after the treatment, or if a message other ...

ViewSonic PJ1165 42 Regarding The Indicator Lamps Lighting and blinking of the STANDBY/ON indicator, the LAMP indicator and the TEMP indicator have the meanings as described in the table below. Please respond in according with the instructions within the table. If the same indication is displayed af...

ViewSonic PJ1165 46 Specifications NOTE • This specifications are subject to change without notice. Item Specification Product name Liquid crystal projector Liquid crys-tal panel Panel size 2.5 cm (0.99 type) Drive system TFT active matrixPixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Z...

ViewSonic PJ1165 47 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Web site T = TelephoneF = FAX Email United States viewsonic.com/support T: (800) 688-6688 F: (909) 468-1202 servi...

ViewSonic PJ1165 48 Limited Warranty VIEWSONIC Projector What the warranty covers:ViewSonic ® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic wil...

ViewSonic PJ1165 49 Appendix Power Cord Safety Guidelines Caution: Use a power cable that is properly grounded. Always use an AC power cord that meets your country’s safety standard. AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.IF THE FITTE...

ViewSonic PJ1165 50 Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal...