Page 2 - Contents; Getting Started
E N G L I S H Contents ViewSonic N3250w 1 Product Registration.................................................................2For Your Records.....................................................................2Important Product Safety Instructions......................................3Antenna In...
Page 3 - Copyright © ViewSonic Corporation, 2005. All rights reserved.; Product Registration; For Your Records; Product disposal at end of product life
E N G L I S H ViewSonic N3250w 2 Copyright © ViewSonic Corporation, 2005. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks ofViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors ...
Page 4 - IMPORTANT PRODUCT SAFETY INSTRUCTIONS; INSTALLATION
E N G L I S H IMPORTANT PRODUCT SAFETY INSTRUCTIONS ATTENTION: Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety,please read all the safety and operating instructions before you operate this product follow its operating and keep this...
Page 5 - ANTENNA INSTALLATION INSTRUCTIONS; Outdoor Antenna Grounding; Cleaning the LCD Display
E N G L I S H ViewSonic N3250w 4 ANTENNA INSTALLATION INSTRUCTIONS 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system isgrounded so as to provide some protection against voltage surges and built-up static charges, Articl...
Page 6 - Congratulations on your purchase of a ViewSonic; Package Contents; Your LCD TV display package includes:
ViewSonic N3250w 5 E N G L I S H Getting Started LCD TV DisplayRCA A/V CableVGA CableQuick Start Guide Congratulations on your purchase of a ViewSonic ® LCD TV display. Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD TV display package i...
Page 7 - Front View of the Product
E N G L I S H Front View of the Product Volume Down Decrease volume or adjust a highlighted control decreasingly while in OSD menu. ViewSonic N3250w 6 3 2 1 4 5 6 7 8 Volume Up Increase volume or adjust a highlighted increasingly control while in OSD menu. MENU Turn OSD menu ON/OFF. CH Down Channel ...
Page 8 - Rear View of the Product
E N G L I S H TV signal input Connect to the antenna or cable servic e. A I H G F E D C B HDMI signal input VGA signal input YPbPr signal input Connect the external video devices with progressive component output to these jacks. J K Earphone output (light blue) PC Audio input (light green)YPbPr sign...
Page 9 - Remote Control
Page 10 - Remote control button function as follow; Select Input Source
E N G L I S H Remote control button function as follow A B C D E F G H I J K L M N O P Source button *PIP/POP button (Guide) *SLEEP button CC button ( Back) Volume / Volume MUTE button POWER button Device buttons *PIP sub-buttons 0~100+ number button *WIDE button UP/DOWN/LEFT/ RIGHT/ENTER button Men...
Page 11 - Key ”Defaults”; Default Setting; Resetting Remote; Device
E N G L I S H Key ”Defaults” The ‘default’ out of box setting enables the Remote to control a predetermine TV, DVD, STB, VCR, VPB, WMA and AUD. Depending on Device desire the following model will be active. Default Setting ViewSonic Samsung RCA Sony ViewSonic ViewSonic WMA-100 Sony Note: Multiple pr...
Page 12 - LED; Basic Setup; sending power off commands.; Pre-Programmed Code Notes
E N G L I S H DeviceButtons LED Basic Setup 1 Power on the A/V component you wish to setup, so that you can test codes by sending power off commands. 2 Refer to the Pre-programmed code tables on pages 2-3 and write down the code number listed. 3 Press and hold the button for the desire device for ap...
Page 13 - AUX Key Setup
E N G L I S H AUX Key Setup The AUX key is used to operate a second TV, DVD, STB, VCR, VPB, WMA, and AUD. A fourth digit is necessary to identify the type of device the key will control. AUXButtons For example, to control a Sony DVD player with a code of 027 under the AUX key a 2 must be added in th...
Page 14 - BRAND
E N G L I S H Pre-Programmed Code Tables ViewSonic LCD TV’s and Plasmas BRAND CODE N1700W 001 N1300 002 N1500 003 N1750W 004 N2010 005 N2010-E 006 N2700W 007 N2750W 008 N3020W 009 N3200W 010 N3200W-E 011 VPW4255 012 VPW5500 012 N2000 014 N3000W 015 DVD Players-2 Grundig 008, 009 Harman Kardon 116Hit...
Page 16 - Cable
E N G L I S H Cable BRAND CODE ABC 006, 067, 069, 105 Archer 072, 073 Cabletime 060 Contec 078 Eastern 079 France Telecom 061GE 066 Gemini 080, 081 General Instrument 066, 107Grundig 062 Hamlin 082, 083, 084, 089, 106 Hitachi 066 Jerrold 066, 080, 085, 086, 101, 105, 107Magnavox 087 Motorola 108 NEC...
Page 17 - VCR
E N G L I S H VCR BRAND CODE Action 102 Admiral 101, 144, 145 Aiko 127 Aiwa 005, 126 Audiovox 122 Bell & Howell 119 Broksonic 059, 105, 120 Calix 122 Canon 124, 125 Capehart 083, 138 Carver 131, 151 CCE 127, 130 Citizen 095, 121, 122, 123, 127Colortyme 096, 117 Craig 085, 090, 104,121, 122, 130C...
Page 18 - WMA; VPB
E N G L I S H Symphonic 077, 095, 104, 126 Tandy 119 Tashiko 122 Tatung 139 Teac 126, 139, 148 Technics 124, 137 Teknika 090, 122, 124, 126 Thomson 031, 032, 035, 036, 038Tivo 113 Toshiba 033, 034, 046, 047, 100, 102, 104, 106, 123, 128, 132, 140Totevision 090, 121, 122 Unitec 095 Unitech 121 Vector...
Page 19 - AUD
E N G L I S H AUD BRAND CODE Aiwa 024, 041, 063 Akai 013 Bose 039 Carver 075 Curtis Mathes 065 Denon 001, 053, 054, 059, 076 Fisher 005, 066, 068, 073 GE 030 Goodmans 013 Gradiente 086 Harman Kardon 002, 025, 052, 070Hitachi 003, 083 JBL 025 Jensen 085 Jerrold 026, 028 JVC 004, 050, 057 Kenwood 005,...
Page 20 - Reattach the battery cover.; Insert Remote Control Batteries; CAUTION; Only use the specified AA batteries.; Installation; Make sure the power is off before installing N3250w.; Connecting with the antenna
E N G L I S H 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. 1. Insert Remote Control Batteries CAUTION Only use the specified AA batteries. Do not m...
Page 21 - Connect Audio Cable
E N G L I S H Connect Video/Audio cables from compatible devices into the back panel of N3250w. 4. Connect AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices Connect Video/Audio cables from compatible devices into the back panel of N3250w. 3. Connect Audio Cable AV model: OPTIONAL: To connect an exter...
Page 23 - the connection that fits for your requirement.
E N G L I S H YPbPr model: DVD Palyer or VCR YPbPr Cable (Cable not supplied) Audio in Cable (Cable not supplied) HDMI model: HDMI Cable (Cable not supplied) DVD Palyer (DVD Palyer should have the HDMI output terminal) Audio Cable (Cable not supplied) There are two possible HDMI cable terminals of y...
Page 26 - the AC Switch on the back of N3250w; Connect power cable
E N G L I S H Connect Earphone from compatible devices into the back panel of N3250w. Earphone: Earphone(Earphone not supplied) Connect the power cord to the N3250w then to a properly grounded AC outlet. Turn on the AC Switch on the back of N3250w 6. Connect power cable AC wall socket AC Switch Swit...
Page 27 - Press the Power
E N G L I S H 8. Select input source for your LCDTV display, via either OSD menu or Remote control The Source key of N3250w is the shortcut key for input selection.TV key of remote control is a shortcut for TV selection. Press the Power button under the LCD TV, or press the Power On (red) button on ...
Page 28 - Basic Operation; Turning on the LCD TV; Enter; VOLUME Adjusting; MUTE; Channel Select; V O L U M E
E N G L I S H Basic Operation Turning on the LCD TV To operate the function of your LCD TV, you can use your remote control or those buttons above your LCD TV to set input source, change channels, or adjust volume. Before using the LCD TV: 1. Insert the power plug. 2. Connect external equipment prop...
Page 29 - OSD Functions; PICTURE MENU
E N G L I S H OSD Functions Source Input: TV Press MENU to turn on OSD menu. To move the cursor bar, please use CH to select your desired item, and then press ENTER . In addittion, you can adjust the volume by using VOL ” + ” or “ - ”. Press to adjust the condition. Press MENU again to get into next...
Page 30 - MENU; INPUT SELECT
E N G L I S H BRIGHTNESS: To adjust the luminance of the image. (right: Max, left: low) CONTRAST: To adjust the contrast ratio of the image. (right: high contrast, left: low contrast) SHARPNESS: To adjust the sharpness of image. (right: sharpen, left: soften) COLOR: To adjust color saturation. (righ...
Page 32 - PIP Screen; To select the source of sound: from main screen or sub-screen.
E N G L I S H PIP SIZE: To adjust the size of sub-screen. The function only acts on PIP. PIP POSITION: To set the position of sub-screen. This function only acts on PIP. PIP Screen POP Screen When selecting PIP , it will show the other items to offer the adjusting function—SUB INPUT, MODE, AUDIO, SW...
Page 34 - SETUP MENU
E N G L I S H OSD POSITION-H: To adjust the horizontal position of OSD. OSD POSITION-V: To adjust the vertical position of OSD. OSD TIME OUT: To setup the displaying time of OSD. TRANSPARENCY: To adjust the transparency of OSD. OSD COLOR: To select your favorite OSD color. LANGUAGE: To select OSD La...
Page 35 - (It does not function in any other mode except in TV mode); TV MENU; SOUND MENU; To select TV signal input from Cable or Air.; ENTER; to confirm the selection.
E N G L I S H (It does not function in any other mode except in TV mode) Source Input: TV PICTURE MENU INPUT SELECT PIP/POP MENU SETUP MENU TV MENU SOUND MENU PARENTAL CONTROL Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 MTS: The function is to provide the multi-channel TV sound. The system with...
Page 39 - Enter 0000 if you have not assigned the special password.
E N G L I S H 4. Enter 0000 if you have not assigned the special password. 5. Use remote control to enter four digit numbers to set the new password. ViewSonic N3250w 38 M E N U : N E X T PA G E : S E L E C T : A D J U S T PA R E N TA L C O N T R O L C A P T I O N C H A N G E PA S S W O R D O F F T ...
Page 40 - How to set up TV Rating?
E N G L I S H 6. Enter the 4 digit numbers again to verify your new password, and then it will show OK on the screen, and then turn back to the Parental Control page. TV RATING GUIDE: To setup TV Rating. How to set up TV Rating? 1. Move the cursor to the item of TV RATING GUIDE. 2. Press . 3. There ...
Page 41 - All children
E N G L I S H 5. Move the cursor by using to select the rating grade you expect to block. 6. Press ENTER to set block or unblock condition. ("B" means block; "U" means unblock.) The TV Ratings are defined as following TV-Y TV-Y7 TV-G All children Directed to older children:this progr...
Page 44 - How to adjust the desired items:
How to adjust the desired items: Use to move cursor bar up and down Use to adjust the item. ViewSonic N3250w 43 M E N U : N E X T PA G E : S E L E C T : A D J U S T P I C T U R E M E N U AU T O A D J U S T B R I G H T N E S S 5 0 C O N T R A S T 5 0 I M A G E H . P O S I T I O NI M A G E V. P O S I ...
Page 45 - To adjust the horizontal position of the video with . (It is; Use to move cursor bar up and down Use to adjust the item.
PICTURE MENU INPUT SELECT PIP/POP MENU SETUP MENU SOUND MENU Page 1 Page 2 Page 3 Page 4 Page 5 ViewSonic N3250w 44 E N G L I S H In HDMI Mode: BRIGHTNESS: To adjust the luminance of the image. (right: Max, left: low) CONTRAST: To adjust the contrast ratio of the image. (right: high contrast, left: ...
Page 46 - To adjust the horizontal position of the video with . (It is
E N G L I S H PICTURE MENU INPUT SELECT PIP/POP MENU SETUP MENU SOUND MENU Page 1 Page 2 Page 3 Page 4 Page 5 In YPbPr Mode: AUTO ADJUST: Auto adjust picture's Horizontal position, Vertical position, Fine Tune and H.Size. Press to start the function. BRIGHTNESS: To adjust the luminance of the image....
Page 47 - How to select the input sources:; Use to move cursor bar up and down; to input the desired item.; The available sub-screen input sources in VGA, HDMI, and YPbPr mode
E N G L I S H PICTURE MENU INPUT SELECT PIP/POP MENU SETUP MENU SOUND MENU Page 1 Page 2 Page 3 Page 4 Page 5 Source Input: VGA, HDMI, YPbPr This page is to select your input sources, such as TV, AV,S-VIDEO, YCbCr, YPbPr,HDMI, and VGA. How to select the input sources: Use to move cursor bar up and d...
Page 50 - Other Information; Specifications; Product Specification are subject to change without notice.
E N G L I S H Other Information Specifications LCD Input signal Compatibility Resolution Speaker Output Audio Output Power Display area Operatingconditions Storageconditions Dimensions Weight Regulations Power savingmodes Preset Timing Mode Type Color Filter Glass surface RGB RF Video Audio PC Recom...
Page 51 - Troubleshooting; Press only one button at a time.
E N G L I S H Troubleshooting No power Make sure power button (and rear power switch) is ON.Make sure A/C power cord is securely connected to the LCD TV.Plug another electrical device (like a radio) into the power outlet to verify thatthe outlet is supplying proper voltage. Power is ON but no screen...
Page 52 - Customer Support; You will need the product serial number.; Web site
E N G L I S H Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Contry/Region United States Canada Web site viewsonic.com/support viewsonic.com/support T = TelephoneF = FAX T: (800) 688-6688F: (909)...
Page 53 - Limited Warranty; VIEWSONIC LCD DISPLAY
E N G L I S H Limited Warranty What the warranty covers:ViewSonic ® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, rep...
Page 54 - Appendix; Safety Guidelines
E N G L I S H Appendix Safety Guidelines Warming: This device must be operated with the original power supply, part number: 12VDC LSE9901B1250, 12VDC UP06031120. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is prop...
Page 55 - FCC Warning
E N G L I S H This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a resi-dential installation. This equipment generates, uses, ...
