Page 3 - iii; ONE YEAR LIMITED WARRANTY; For LCD Displays; WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
Vidikron VL-26/VL-32 Owner’s Operating Manual iii ONE YEAR LIMITED WARRANTY For LCD Displays Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation, setup and care, you should enjoy many years of unparalleled video performance. This ...
Page 4 - iv; EFFECTIVE WARRANTY DATE:
iv Vidikron VL-26/VL-32 Owner’s Operating Manual Vidikron limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There are no express warranties. Vidikron also excludes any obligation on its part for incidental or consequential damages rel...
Page 5 - ADDITIONAL INFORMATION:
Vidikron VL-26/VL-32 Owner’s Operating Manual v To locate the name and address of the nearest Vidikron Authorized Service Center, or for additional information about this Limited Warranty, please call or write: VIDIKRON Attn: Customer Service Department 2900 Faber Street Union City, CA 94587 Ph: (51...
Page 6 - • Do not place heavy objects on top of the LCD display.; Safety Precautions; WARNING
vi Vidikron VL-26/VL-32 Owner’s Operating Manual Thank you for your purchase of this quality Vidikron product! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the...
Page 7 - vii; Table of Contents
Vidikron VL-26/VL-32 Owner’s Operating Manual vii 1 Table of Contents ONE YEAR LIMITED WARRANTY .............................................................................................. iii Safety Precautions .........................................................................................
Page 8 - viii
viii Vidikron VL-26/VL-32 Owner’s Operating Manual 4. Operation .......................................................................................................................... 23 Turning on the Power ............................................................................................
Page 9 - ix; List of Figures
Vidikron VL-26/VL-32 Owner’s Operating Manual ix 1 List of Figures 2-1. DView Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2-2. DView Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 11 - EXIT; to return to the previous menu.”; Introduction; A carriage return; Note
Vidikron VL-26/VL-32 Owner’s Operating Manual 1 1.1 About This Manual This Owner’s Manual describes how to install, set up and operate the Vidikron VL-26 and VL-32 LCD Displays. Throughout this manual, the Vidikron VL-26 and VL-32 LCD Displays are referred to simply as the “DView.” Target Audience V...
Page 12 - Graphic Conventions:; These symbols appear in numerous places throughout the manual,; Tip
Introduction 2 Vidikron VL-26/VL-32 Owner’s Operating Manual Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that you must keep in mind to avoid problems with your equipment or injury: 1.2 Using This Manual Use the following table to locate the...
Page 13 - Key Features and Benefits
Introduction Vidikron VL-26/VL-32 Owner’s Operating Manual 3 1.3 Description, Features and Benefits Vidikron presents the high performance DView™ Series VL-26 and VL-32 LCD Displays, perfect for those who demand our award-winning flat panel performance in a more intimate size than we offer with our ...
Page 14 - Parts List; Optional Accessories:; • Wall Mount kit
Introduction 4 Vidikron VL-26/VL-32 Owner’s Operating Manual Parts List Your DView is shipped with the following items. If any items are missing or damaged, please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON. • VL-26 or VL-32 LCD Display (with Table Stand) • Remote C...
Page 15 - Controls and Indicators; Controls and Functions; Right Side
Vidikron VL-26/VL-32 Owner’s Operating Manual 5 2.1 DView at a Glance Figure 2-1 and Figure 2-2 show the locations of the DView controls, indicators and connectors. Controls and Indicators Figure 2-1. DView Controls and Indicators 1. TV/AV Button (Input Source Selection) 2. MENU Selection Button 3. ...
Page 16 - Connectors; INPUT 2 S-Video Input; Connect the DView to power here.; RGB HD; For best results, do not run your DVD player in progressive mode.; Rear
Controls and Functions 6 Vidikron VL-26/VL-32 Owner’s Operating Manual Connectors Figure 2-2. DView Connectors 1. INPUT 2 S-Video Input Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR. 2. INPUT 2 Audio Input 3. INPUT 2 Composite Video Input Standard co...
Page 17 - Connect the audio output from your RGB or DVI source here.; ATSC DTV Input; Connect the audio output from your Input 3 source here.; INPUT 1 COMPOSITE VIDEO INPUT; Connect the audio output from your Input 1 source here.
Controls and Functions Vidikron VL-26/VL-32 Owner’s Operating Manual 7 9. Audio Input (RGB/DVI) Connect the audio output from your RGB or DVI source here. 10. ATSC DTV Input 75-ohm coaxial input for connecting a TV antenna or CATV system to the digital TV tuner. 11. INPUT 3 Component Video (RCA conn...
Page 19 - Input Selection
Controls and Functions Vidikron VL-26/VL-32 Owner’s Operating Manual 9 1. OFF / ON Use these buttons to turn the DView on or off. 2. Numeric Buttons Use these buttons to enter TV channel numbers or menu pass codes. Use the 100 button to enter channel numbers above 99. Use the - button to enter DTV s...
Page 20 - Press to choose from three PIP window sizes.
Controls and Functions 10 Vidikron VL-26/VL-32 Owner’s Operating Manual 6. Aspect Ratio Selection Buttons: ANA (Anamorphic) For 16:9 DVDs or HDTV program material. 4X3 (Standard 4:3) The input signal is scaled to fit 4:3 display mode in the center of the screen. LETBOX (Letterbox) Image in letterbox...
Page 21 - Sound Control Buttons:; Press this button to turn Surround Mode on or off.; MUTE; Press this button to mute the audio output.; Favorite Channel Selection Buttons
Controls and Functions Vidikron VL-26/VL-32 Owner’s Operating Manual 11 11. Sound Control Buttons: S.MODE Press this button repeatedly to scroll through the available Equalizer presets (CUSTOM, STANDARD, MUSIC, FILM or SPEECH). SURRND (Surround) Press this button to turn Surround Mode on or off. MTS...
Page 23 - Battery Installation; Installation; to avoid damage from battery leakage.
Vidikron VL-26/VL-32 Owner’s Operating Manual 13 3.1 Remote Control Battery Installation To install batteries in the remote control: 1. Slide the battery cover in the direction of the arrow and remove it. 2. Insert the included batteries. Ensure that the polarities correctly match the and markings i...
Page 24 - Step; Connect signal sources to the DView
Installation 14 Vidikron VL-26/VL-32 Owner’s Operating Manual 3.2 Quick Setup Table 3-1 gives a quick overview of the DView installation process. The sections following this one provide detailed instructions. Installation should be performed by a qualified custom video installation specialist. Table...
Page 25 - Wall-Mounting the DView
Installation Vidikron VL-26/VL-32 Owner’s Operating Manual 15 3.3 Installation Considerations Proper installation of your DView will ensure the highest possible picture quality. Whether you are installing the DView temporarily or permanently, you should take the following into account to ensure that...
Page 26 - When connecting your equipment:; Input Panel
Installation 16 Vidikron VL-26/VL-32 Owner’s Operating Manual 3.4 Connections to the DView Proceed as follows to connect the DView to your video sources, external controller(s) – if present – and AC power. When connecting your equipment: • Turn off all equipment before making any connections. • Use ...
Page 27 - The DView has a DVI input for connecting a DVD player, DTV decoder,; p y
Installation Vidikron VL-26/VL-32 Owner’s Operating Manual 17 DVI Connections: The DView has a DVI input for connecting a DVD player, DTV decoder, personal computer or any other device with a DVI or HDMI output. Connect such devices as shown in Figure 3-2. Figure 3-2. DVI Connections Use the DVI inp...
Page 28 - The DView has an RGB input for connecting a personal computer (see
Installation 18 Vidikron VL-26/VL-32 Owner’s Operating Manual RGB-HD Connections: The DView has an RGB input for connecting a personal computer (see Figure 3-3) or DTV decoder with an RGB output. (This application may require a DB15-to-RGBHV breakout cable.) Figure 3-3. Analog RGB Connections 1. Ref...
Page 29 - Component Video Connections:; If you have a DVD player or DTV decoder with a; Input 2; Video; Composite Video
Installation Vidikron VL-26/VL-32 Owner’s Operating Manual 19 Component Video Connections: If you have a DVD player or DTV decoder with a component (YPbPr) output, connect it to INPUT 3 of the DView as shown in Figure 3-4. Figure 3-4. Component Video Connections Composite/S-Video Connections: The DV...
Page 30 - MONITOR OUT Connection
Installation 20 Vidikron VL-26/VL-32 Owner’s Operating Manual MONITOR OUT Connection The DView has a monitor out feature for connecting a second VCR or other auxiliary equipment. Connect the MONITOR OUT audio and video jacks to the audio and video inputs of the VCR or other equipment as shown in Fig...
Page 31 - For more information about using this connection, refer to; Connector Pin Assignments:
Installation Vidikron VL-26/VL-32 Owner’s Operating Manual 21 RS-232 Controller Connection Use a “null-modem” RS-232 cable with a 9-pin female connector to connect a PC or home theater control/automation system (if present) to the RS-232 port on the DView; see Figure 3-8. For more information about ...
Page 33 - Operation
Vidikron VL-26/VL-32 Owner’s Operating Manual 23 4.1 Turning on the Power 1. Turn on your source components. 2. Plug the female end of the power cord into the AC receptacle on the rear of the DView (AC 100V ~ 240V). 3. Connect the other end to your AC power source. 4. Turn on the main power switch a...
Page 36 - Main Menu; . Select the appropriate aspect ratio for the type of program
Operation 26 Vidikron VL-26/VL-32 Owner’s Operating Manual Main Menu The Main Menu is the starting point for accessing all DView functions. (The ISF Calibration menu is not accessible until you enter a passcode.) Source From the Main Menu, select Source to choose a video signal source. The active so...
Page 37 - Aspect Ratio
Operation Vidikron VL-26/VL-32 Owner’s Operating Manual 27 Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key Description Anamorphic ANA Select Anamorphic to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 display. Stan...
Page 38 - Perform the adjustments in the order listed here.; Picture Adjust
Operation 28 Vidikron VL-26/VL-32 Owner’s Operating Manual Picture Adjust Use the controls in the Picture Adjust menu to calibrate your DView for optimum picture quality. The DView has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). T...
Page 39 - Figure 4-2. Typical PLUGE Pattern for Adjusting Brightness; • The darkest black bars disappear into the background.
Operation Vidikron VL-26/VL-32 Owner’s Operating Manual 29 Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an acronym for “Picture Line-Up Generation Equipment.”) Figure 4-2 shows a typical PLUGE pattern. Figure 4-2. Typical PLUGE Pattern for Adjusting Brightness ...
Page 40 - Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast
Operation 30 Vidikron VL-26/VL-32 Owner’s Operating Manual Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the one shown in Figure 4-3. Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast Select Contrast from the Picture Adjust menu. Using the left- an...
Page 42 - Adjust menu and press
Operation 32 Vidikron VL-26/VL-32 Owner’s Operating Manual Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To adjust sharpness, select Sharpness from the Picture Adjust menu and press ENTER . On your external test pattern source, select a pattern like the one shown in Fig...
Page 44 - Channel; Timer
Operation 34 Vidikron VL-26/VL-32 Owner’s Operating Manual Channel To set up the DView channel tuner, select TV as the source. Then, select Channel from the Main Menu and press ENTER . Auto Tuning: To have the DView automatically detect available TV or CATV channels, select Auto Tuning and press ENT...
Page 45 - Setup; etup
Operation Vidikron VL-26/VL-32 Owner’s Operating Manual 35 Setup Use the controls in the Setup menu to perform advanced image quality adjustments and access various other DView features. OSD Language: Select OSD Language from the Setup menu and press ENTER . Then, use the up- or down-arrow buttons t...
Page 46 - ratings, select Parental Control from the Setup menu and press; – and press; Table 4-2. FCC Ratings and Content Categories; Description
Operation 36 Vidikron VL-26/VL-32 Owner’s Operating Manual Parental Control: To block the display of television programs or movies based on their ratings, select Parental Control from the Setup menu and press ENTER . Enter the default Personal Identification Number (PIN) – 0000 – and press ENTER aga...
Page 47 - F Calibration
Operation Vidikron VL-26/VL-32 Owner’s Operating Manual 37 • Unrated: To allow or block access to unrated content, select Unrated from the Parental Control menu and select Allow or Block. Press ENTER to confirm your choice. • Change PIN: The default PIN for accessing the parental controls or bypassi...
Page 48 - Backlight; White Balance
Operation 38 Vidikron VL-26/VL-32 Owner’s Operating Manual • Backlight: Refer to Backlight on page 32. • Save Settings: For each input and supported resolution, the DView lets you save image quality settings as presets that you can recall at a later time. You can create up to three presets – designa...
Page 49 - the ISF Calibration menu and press; This command is not undoable. Use it with
Operation Vidikron VL-26/VL-32 Owner’s Operating Manual 39 Baud Rate: Select Baud Rate from the ISF Calibration menu to set the data transfer rate of the DView’s RS-232 SERVICE port. (This setting must match the data rate of the device connected to the RS-232 input.) Command Ack: The Command Ack set...
Page 50 - To use PIP, press the; Press; Press; PIP; again to turn PIP off.
Operation 40 Vidikron VL-26/VL-32 Owner’s Operating Manual 4.5 Using Picture-In-Picture (PIP) To use PIP, press the PIP ( ) button. The PIP window appears inside the main image window. Press PIP again to switch to side-by-side PIP mode. Press PIP again to turn PIP off. MENU MENU EXIT EXIT ASPECT SIZ...
Page 51 - Press the; POSITION; ) button on the remote control repeatedly until; Table 4-3. Available Main and PIP Source Combinations; Main; TV
Operation Vidikron VL-26/VL-32 Owner’s Operating Manual 41 Press the TV/AV button ( ) to select a PIP signal source. For each source, Table 4-3 shows which of the other sources are available as a PIP source. Changing the PIP Position To change the PIP window position, press the POSITION ( ) button o...
Page 52 - To change the PIP window size, press the; SIZE; the remote control.
Operation 42 Vidikron VL-26/VL-32 Owner’s Operating Manual Changing the PIP Size To change the PIP window size, press the SIZE ( ) button on the remote control repeatedly to achieve the desired window size. Changing the PIP Aspect Ratio To change the aspect ratio of the PIP window from 4:3 to 16:9 o...
Page 53 - To swap the main and PIP images, press the; SWAP; button on the remote control.
Operation Vidikron VL-26/VL-32 Owner’s Operating Manual 43 Swapping the Main and PIP Images To swap the main and PIP images, press the SWAP button on the remote control. Swapping the Main and PIP Audio Programs To swap the main and PIP audio programs, press the S.SWAP button on the remote control. M...
Page 54 - Table 4-4. Compatibility with Stereo and SAP Audio Broadcasts
Operation 44 Vidikron VL-26/VL-32 Owner’s Operating Manual 4.6 Stereo Sound/SAP The DView supports Multichannel Television Sound (MTS), the broadcast audio standard that allows transmission of both stereo and Secondary Audio Program (SAP) content. The SAP is usually a foreign-language translation. H...
Page 55 - Maintenance and Troubleshooting; Symptom
Vidikron VL-26/VL-32 Owner’s Operating Manual 45 5.1 Cleaning Regular cleaning will extend the life and performance of the DView. Before cleaning, be sure to unplug the power cord from the power outlet. Cleaning the Display Panel Body and Remote Control Do not under any circumstances use solvents su...
Page 57 - Serial Communications; Command
Vidikron VL-26/VL-32 Owner’s Operating Manual 47 6.1 RS-232 Connection and Port Configuration To interface the DView with a home theater automation/control system or a PC running terminal emulation software, connect it to your control system or PC as shown in Figure 3-8. Configure the RS-232 control...
Page 61 - Table 7-1 lists the DView specifications.; Specifications; Available Aspect Ratios:; Yes; Operating Environment:; Complies with FCC, UL; Specifications are subject to change without notice.
Vidikron VL-26/VL-32 Owner’s Operating Manual 51 7.1 DView Specifications Table 7-1 lists the DView specifications. 7 Specifications Table 7-1. DView Specifications Native Resolution: 1366 x 768 WXGA Screen Size: VL-26 = 26 in. (diagonal) VL-32 = 32 in. (diagonal) Screen Aspect Ratio: 16:9 Available...
Page 64 - Signal Type
Specifications 54 Vidikron VL-26/VL-32 Owner’s Operating Manual 7.3 Computer/Video Signal Compatibility The DView can display video signals from a variety of computer sources via its RGB-HD and DVI inputs. Table 7-2 lists the signal types that are compatible with the DView, and indicates which of th...
