VIAIR 45042 - User Manual
VIAIR 45042 Compressor – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INSTRUCTIONS; CAUTION - To reduce risk of electrical shock or electrocution:; INSTALLATION; Guidelines for Selecting Mounting Location:; USER MANUAL
- Page 3 – MOUNTING AND WIRING; Mounting Hardware
- Page 5 – SPECIFICATIONS; Permanent Magnetic
- Page 6 – COMPRESSOR APPLICATION GUIDE; VIAIR COMPRESSOR REFERENCE CHART
- Page 7 – TROUBLESHOOTING GUIDE:; CAUTION: NEVER DISASSEMBLE COMPRESSOR WHILE; CORRECTIVE ACTION
- Page 8 – OR CONSEQUENTIAL DAMAGES AS RESULT OF MISUSE OR ABUSE.; “H” MODEL
IMPORTANT:
It is essential that you and any other operator of this
product read and understand the contents of this manual
before installing and using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
USER MANUAL
400H – HARDMOUNT AIR COMPRESSOR KIT
PART NO. 40042
450H – HARDMOUNT AIR COMPRESSOR KIT
PART NO. 45042
450H
400H
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or electrocution: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs. - Do not use this product in or area where it can fall or be pulled into water ...
MOUNTING AND WIRING 1. Disconnect ground cable from vehicle’s battery. 2. Temporarily position the air compressor in the location where it will be mounted. Route the positive wire to the positive post of the battery. Measure and cut positive wire to the appropriate length and use appropriate inline ...
SPECIFICATIONS • Part No. 40042 / 400H Air Compressor Motor Voltage: 12 Volts Max. Current Consumption: 26 Amps Motor Type: Permanent Magnetic Max. Working Pressure: 150 PSI Max. Duty Cycle (@ 72°F & 100 PSI): 33% (Min. On/Off @72°F & 100 PSI) 15 On / 30 Off Max. Restart Pressure: 150 PSI Ma...
