VIAIR 30016 - User Manual
VIAIR 30016 Compressor – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INSTRUCTIONS; CAUTION - To reduce risk of electrical shock or electrocution:; INSTALLATION; Guidelines for Selecting Mounting Location:; USER MANUAL
- Page 3 – MOUNTING AND WIRING; on2 Bolt-On Platform
- Page 5 – SPECIFICATIONS; 50 PSI 2ON2 PLATFORM PART NUMBERS:; 00 PSI 2ON2 PLATFORM PART NUMBERS:; Recommended Fuse: 60 Amps
- Page 6 – on2 LAYOUT SCHEMATIC:; or; Manifold Bracket
- Page 7 – TROUBLESHOOTING GUIDE:; CAUTION: NEVER DISASSEMBLE COMPRESSOR WHILE; CORRECTIVE ACTION
- Page 8 – OR CONSEQUENTIAL DAMAGES AS RESULT OF MISUSE OR ABUSE.; ABOUT COMPRESSOR DUTY CYCLE:; ONE-HOUR DUTY CYCLE; Hour Run Time; ABOUT RATED WORKING PRESSURE:; than compressor’s rated working pressure.
IMPORTANT:
It is essential that you and any other operator of this
product read and understand the contents of this manual
before installing and using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
USER MANUAL
30001 – 150 PSI, Dual 400C (2007-2011 Jeep JK Crossmember Bracket)
30005 – 200 PSI, Dual 380C (2007-2011 Jeep JK Crossmember Bracket)
30016 – 150 PSI, Dual 400C Universal (Crossmember Bracket not included)
30018 – 200 PSI, Dual 380C Universal (Crossmember Bracket not included)
Dual Compressor on 2.0 Gallon Air Tank
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or electrocution: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs. - Do not use this product in or area where it can fall or be pulled into water ...
MOUNTING AND WIRING 1. Disconnect ground cable from vehicle’s battery. 2. Route the included wiring harness to the battery area. Secure harness as needed to prevent movement. 3. Install included 80-amp relay (see electrical system schematic). 4. Install fittings as desired for setup into billet mani...
SPECIFICATIONS 150 PSI 2ON2 PLATFORM PART NUMBERS: • 30001 (2007-2011 JK) • 30016 (Universal) Motor Voltage: 12 Volts Max. Current Consumption: 60 Amps Recommended Fuse: 60 Amps Motor Type: Perm. Magnetic Horse Power: 1/4 Max. Working Pressure: 150 PSI Max. Duty Cycle (@72ºF & 100 PSI): 33% Max....
