VIAIR 25058 - User Manual

VIAIR 25058

VIAIR 25058 Compressor – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – IMPORTANT SAFETY INSTRUCTIONS; CAUTION - To reduce risk of electrical shock or electrocution:; INSTALLATION; Guidelines for Selecting Mounting Location:; USER MANUAL
  • Page 3 – MOUNTING AND WIRING; Mounting Hardware
  • Page 5 – COMPRESSOR APPLICATION GUIDE; VIAIR COMPRESSOR REFERENCE CHART
  • Page 6 – ABOUT RATED WORKING PRESSURE:; than compressor’s rated working pressure.; SINGLE “C” MODEL
  • Page 7 – TROUBLESHOOTING GUIDE:; CAUTION: NEVER DISASSEMBLE COMPRESSOR WHILE
  • Page 8 – VIAIR CORPORATION
Loading the manual

250C-IG COMPRESSOR KIT 12V

PART NO. 25050

250C-IG COMPRESSOR KIT 24V

PART NO. 25058

IMPORTANT:

It is essential that you and any other operator of this

product read and understand the contents of this manual

before installing and using this product.

SAVE THIS MANUAL FOR FUTURE REFERENCE

USER MANUAL

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; CAUTION - To reduce risk of electrical shock or electrocution:; INSTALLATION; Guidelines for Selecting Mounting Location:; USER MANUAL

IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or electrocution: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs. - Do not use this product in or area where it can fall or be pulled into water ...

Page 3 - MOUNTING AND WIRING; Mounting Hardware

MOUNTING AND WIRING 1. Disconnect ground cable from vehicle’s battery. 2. Temporarily position the air compressor in the location where it will be mounted. 3. Route ground wire to the negative post of the battery or to an appropriate grounding point and cut ground wire to length as needed. 4. Mount ...

Page 5 - COMPRESSOR APPLICATION GUIDE; VIAIR COMPRESSOR REFERENCE CHART

• Part No. 25058 / 250C-IG-24V Compressor Kit (CE Spec.) Motor Voltage: 24 Volts Max. Current Consumption: 5 Amps Motor Type: Permanent Magnetic Horsepower: 1/4 Max. Working Pressure: 150 PSI Max. Duty Cycle (@ 72°F & 100 PSI): 100% Minutes On/Off (@ 72°F & 100 PSI): Continuous Max. Restart ...

Other VIAIR Compressors Models

All VIAIR Compressors