Verilux VP02 - Manual - manualsarea.com

Page 3 - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR; • Turn; off/unplug and allow to cool before replacing bulb or cleaning.; IMPORTANT SAFETY INSTRUCTIONS

2 CAUTION: • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISMANTLE. THERE ARE NO SERVICEABLE PARTS INSIDE. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The exclamation point within an equilateral triangle alerts the user to the presence of important o...

Page 4 - SAVE THESE INSTRUCTIONS

3 1. Read these instructions – before using this lamp. 2. Keep these instructions – for future reference. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this lamp in damp/humid or wet locations. 6. For indoor use only. 7. Clean only with dry cloth. 8. Do not block any ventilation op...

Page 5 - GENERAL PRECAUTIONS; This product may cause interference to radio equipment

4 GENERAL PRECAUTIONS • Do not use with power supply voltage other than 120V AC • Avoid placing the lamp in areas that are dusty, humid/moist, lack ventilation, or are subject to constant vibration. • Not for use with light dimmers, timers, motion detectors, voltage transformers, or extension cords....

Page 6 - Unpacking; For your convenience, the bulb has been pre-installed in the

5 SET-UP INSTRUCTIONS Unpacking Please remove all packaging material. Check the carton for the items pictured below: Note: For your convenience, the bulb has been pre-installed in the socket. However it may have loosened during transit. Please check to be sure it is fully seated in the socket (see p...

Page 7 - Attaching the Parabolic Grid Diffuser; Remove protective packing from bulb.; TAB

6 SET-UP INSTRUCTIONS Attaching the Parabolic Grid Diffuser 1. Remove protective packing from bulb. 2. Remove grid diffuser from protective plastic bag. 3. Insert plastic pegs at bottom of grid diffuser into openings near bulb socket and snap tab into place. 4. Plug lamp into a standard 110-120V out...

Page 8 - CORD INSERTION

7 The lamp cord may be stored completely or partially within the cavity at the back of the lamp. To insert the cord, simply close the lamp, place it on a level surface with its face down, turn the cord in a vertical position and insert the cord into the back of the lamp until all or part of the leng...

Page 9 - BULB REPLACEMENT; Unplug lamp from power source.

8 BULB REPLACEMENT Bulb removal & replacement REMOVAL 1. Unplug lamp from power source. 2. To access the bulb, remove the grid diffuser by depressing the tab and lifting it out (see page 6) 3. Firmly hold the bulb base (B) and pull bulb (C) from the socket in an outward motion. REPLACEMENT 1. Un...

Page 10 - TROUBLESHOOTING; DO NOT USE SOLVENTS OR

9 TROUBLESHOOTING Before requesting service on your Verilux ® lamp please read the following: • Make sure all power connectors, cords, and plugs are inserted fully and securely. • Be sure the bulb is securely seated in the socket. (See page 8) • Make sure there is power to the wall outlet or try ano...

Page 11 - Three-Year Limited Warranty; This limited warranty is provided by:; WARRANTY

10 Three-Year Limited Warranty This limited warranty is provided by: Verilux, Inc., Research Park, 9 Viaduct Road, Stamford, CT 06907 Verilux ® warrants this product to be free of defects in materials and workmanship for a period of three years from the invoice date of original retail purchase. Duri...

Verilux VP02 - Manual

Table of Contents:

Summary

Other Verilux Models