Vector VEC259 - Manual
Vector VEC259 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INFORMATION
- Page 3 – ADDITIONAL KEY FEATURES; FIGURE 2; INTRODUCTION; and; NOZZLE HATCH COVER
- Page 4 – FIGURE 3; CHARGING/RECHARGING THE BATTERY PACK; FUSED DC PLUG
- Page 5 – TYPICAL INFLATION TIMES FOR COMPRESSOR USE; VEHICLE AND TRAILER TIRES; FIGURE 4; INFLATOR; CONTACT
- Page 6 – FIGURE 6; INFLATING
- Page 7 – - LANTERN LIGHT PARTS REPLACEMENT; MAINTENANCE/REPLACEMENT PARTS
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY,
OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ
AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT
LABELS. FAILURE TO DO SO COULD RESULT IN INJURY AND/OR PROPERTY DAMAGE.
4140 SW 28th Way, FT. LAUDERDALE, FL 33312
Tel 954-584-4446 • TOLL FREE: 866-584-5504 • Fax 954-584-5556
www.vectormfg.com
OWNER’S MANUAL
& WARRANTY INFORMATION
4140 SW 28th Way, Ft. Lauderdale, FL 33312
PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: 954-584-5556.
You may also contact us at our web site www.vectormfg.com.
MS062703
VEC259
CORDED, CORDLESS,
RECHARGEABLE COMPRESSOR, INFLATOR
AND LANTERN LIGHT COMBO
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 NOTE: This product is shipped in a partially charged state. Before use, charge batter y using AC method for 24 hours. IMPORTANT SAFETY INFORMATION Be sure to read and understand all WARNINGS and CAUTIONS before using this product. Please read this guide carefully before use to ensure optimum perfo...
4 The compressor on/off switch controls operation of the compressor. It can be conveniently depressed and released to control inflation. An exact pressure is obtained by observing the gauge and releasing the trigger when the correct pressure is achieved. For longer inflation operations, the trigger ...
6 The DC power adapter has a fused DC plug and connecting cord stored inside the DC power adapter. To use the DC power adapter, first remove the DC plug from it’s storage in the adapter. Remove the cord from storage, and connect the DC power adapter to the compressor. Make sure it snaps into positio...
