Vector VEC011 - Manual

Vector VEC011 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – SAVE THESE INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS
Page 3 – TABLE OF CONTENTS; INTRODUCTION; Thank you for choosing the; FEATURES; exclusive recessed cable holsters
Page 4 – USING THE UNIT AS A JUMP-STARTER; Connect the RED clamp first,; Procedure for jump-starting POSITIVE GROUND SYSTEMS; • If vehicle fails to start, turn OFF the ignition, turn OFF the Jump-; • Illuminate areas under the hood, inside tents and work areas.
Page 5 – The battery can be recharged using an AC or DC adapter (see below).; 20 Volt AC Recharge; DC accessory outlet.; RECHARGE; • Never touch RED and BLACK clamps together — this can cause; USING THE UNIT AS A 12 VOLT DC PORTABLE POWER SUPPLY; CAUTION; NEVER INSERT A CIGARETTE LIGHTER INTO THE UNIT’S ACCESSORY OUTLET.; USING THE WORKLIGHT
Page 6 – Do not expose battery to fire or intense heat, as it may explode.; TROUBLESHOOTING; • DO NOT EXCEED 3 HOURS MAXIMUM OF CHARGING TIME USING

Loading the manual

VEC011

VWC011

USER’S MANUAL

& WARRANTY INFORMATION

IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.

www.vectormfg.com

4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.

Toll Free: (866) 584-5504

START-IT

Jump-Starter

12 Volt DC Power Supply

Portable • Cordless • Rechargeable

TWO YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the

responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than those

described herein.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in

materials and workmanship for two years from the date of purchase without additional charge. The

warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for any

amount of damage in excess of the retail purchase price of the product under any circumstances. Incidental

and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or damage to

units from misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper

polarity power sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned to manufacturer. Any

defective product, other than accessories, that is returned to manufacturer within 30 days of the date of

purchase will be replaced free of charge. If such a product is returned more than 30 days but less than two

years from the purchase date, manufacturer will repair the unit or, at its option, replace it free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer’s option. A

unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or

replaced unit will then be warranted under the terms of the remainder of the warranty period. The customer

is responsible for the shipping charges on all returned items after 30 days. During the warranty period,

manufacturer will be responsible for the return shipping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from

normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or

exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized

use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and

Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department at (954) 584-4446

or toll free at (866) 584-5504 for general repair information and charges if applicable. You may also

contact us through our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on

how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,

so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal

rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax or

mail (see below). We suggest that you keep the original packaging in case you need to ship the unit. When

returning a product, include your name, address, phone number, dated sales receipt (or copy) and a

description of the reason for return and product serial number. After repairing or replacing the unit, we will

make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing.

Enter the Model Number and “START-IT

Jump-Starter” as Product Type. All Vector products must be

registered within 30 days of purchase to activate this warranty. Mail the completed registration form, along

with a copy of the original sales receipt to:

ATTN.: CUSTOMER SERVICE

4140 SW 30th Ave., Ft. Lauderdale, FL 33312

• TOLL FREE: (866 ) 584-5504 • FAX: (954) 584-5556 •

WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

RD061005

MADE IN CHINA

Vec011_VW011_Manual_061005 6/16/05 12:12 PM Page 8

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - SAVE THESE INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS

iii CAUTIONS Use only the supplied cords/adapters for recharging this unit. Do not recharge for more than 3-4 hoursmaximum using 12 volt DC method. Recharge unit after each use.All on/off switches should be in the OFF position when the unit is charging or not in use. Make sure allswitches are in the...

Page 3 - TABLE OF CONTENTS; INTRODUCTION; Thank you for choosing the; FEATURES; exclusive recessed cable holsters

iv 1 TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Battery Charge Status . . . . . . . . . . ...

Page 4 - USING THE UNIT AS A JUMP-STARTER; Connect the RED clamp first,; Procedure for jump-starting POSITIVE GROUND SYSTEMS; • If vehicle fails to start, turn OFF the ignition, turn OFF the Jump-; • Illuminate areas under the hood, inside tents and work areas.

3 USING THE UNIT AS A JUMP-STARTER This Jump-Starter is equipped with a safety Power Switch that only allows energy toflow when proper connections are made to battery and frame. Once theconnections are properly made, turn the switch ON to jump-start the vehicle. 1. Turn OFF vehicle ignition and all ...