Vector SMATE200A - Manual
Vector SMATE200A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The variety of signal generation for production
- Page 3 – Option overview
- Page 4 – Single-path instrument
- Page 10 – Configuration Examples; One baseband generator and one RF path; One baseband generator and two RF paths
- Page 11 – Two baseband generators and two RF paths
- Page 12 – Ordering information
Vector Signal Generator ¸SMATE 200A
Configuration Guide
Version
01.00
April
2005
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The variety of signal generation for production This document guides you step-by-step through the configuration procedure for the Vector Signal Generator R&S SMATE200A. Each step indicates whether an option is mandatory or optional and also provides the following information: Option Name of the ...
Option overview RF path B RF path A Base Unit 100 kHz to 6 GHz 1st RF Path SMATE-B106 1401.1200.02 Vector Signal Generator SMATE200A 1400.7005.02 Baseband Options marked with 2x (first in baseband path can be in- stalled twice A, second in baseband path B) High Power Output 1st RF Path SMATE-B31 140...
Single-path instrument Applies if the instrument is equipped with one RF path and no more than one baseband path. Step c Configure RF path MANDATORY Choose frequency range (only one choice possible) MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATEB103 100 kHz to 3 GHz...
