Page 2 - TABLE OF CONTENTS
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Device Table ....
Page 3 - INTRODUCTION
INTRODUCTION The One For All DVD Expert Universal Remote Control(URC-4041) is designed to remotely operate up to fourhome entertainment devices and features intuitive andeasy-to use buttons to operate a DVD component. Itssophisticated technology will allow you to consolidateyour original home entert...
Page 4 - FEATURES AND FUNCTIONS; Key Charts
4 FEATURES AND FUNCTIONS Use the illustration below to locate features on the One For All DVD Expert Universal Remote Control(URC-4041) and then study the Key Charts (on the next two pages) to learn how they function. To find out what type of devices can be controlled byeach device key after program...
Page 5 - Device Table
5 Key Charts When the LED (red light) blinks, the remote control is working and (afterprogramming) is sending signals. Press DVD/VCR , AUX , CBL/SAT , or TV once to select a desired home entertainment device to control.Also see the Device Table on page 7. Press POWER once to turn on or off the selec...
Page 8 - INSTALLING BATTERIES; inserted correctly, the
INSTALLING BATTERIES 1. On the remote control’s back, push the taband lift off the battery cover. 2. Obtain two (2) new AAA alkaline batteries.Match the + and – marks on the batteriesto the + and – marks in the battery case,then insert the new batteries. 3. Press the battery cover back into place.Th...
Page 9 - PROGRAMMING DEVICE CONTROL; Press and hold
PROGRAMMING DEVICE CONTROL The One For All DVD Expert Universal Remote Controlis preprogrammed at the factory to operate an RCA TV,a Toshiba DVD player, a Motorola cable box, and aPioneer audio receiver/amplifier. To control devices otherthan the default brands, perform the following steps;otherwise...
Page 10 - Searching For Your Code; SEARCHING FOR YOUR CODE
PROGRAMMING DEVICE CONTROL(continued) 5. Aim the remote control at the device andpress POWER once. The device should turn off. If it does not, repeat steps 2 through 5(starting on the previous page), tryingeach code for your brand until you findone that works. If it still doesn’t work, try Searching...
Page 11 - CHECKING THE CODES
4. Aim the remote control at the TV andslowly alternate between pressing POWER and TV . Stop when the TV turns off (after pressing POWER ). NOTE: In the search mode, the remote controlwill send IR codes from its library to the selecteddevice, starting with the most popular code first. 5. To lock in ...
Page 12 - PROGRAMMING A MASTER POWER MACRO; Master Power Macro; Operating The Master Power Macro
PROGRAMMING A MASTER POWER MACRO In its default state, the POWER key on the One For All DVD Expert Universal Remote Control will individuallypower your home entertainment devices on or off.However, you can also program a Master Power Macro onto the POWER key that will sequentially turn on or off all...
Page 13 - Clearing The Master Power Macro; Master Power; USING KEYMOVER; Keymover; Programming Keymover
Clearing The Master Power Macro 1. Press and hold SET until the LED (red light) blinks twice, then release SET . 2. Enter 9 - 9 - 5 . The LED will blink twice. Then press POWER once. 3. Press and hold SET until the LED blinks twice, then release SET . The Master Power Macro is now cleared. USING KEY...
Page 14 - Restoring Keymoved Keys to Default Settings; RE-ASSIGNING DEVICE KEYS; two DVD players
USING KEYMOVER Programming Keymover (continued) Upon completion of the above procedure, you can nowuse your One For All DVD Expert Universal RemoteControl to control the TV’s volume and mute in theDVD mode, as well as in the TV mode. Restoring Keymoved Keys to Default Settings Restoring A Single Key...
Page 15 - Perform Sequence; USING CHANNEL SCAN
3. Press DVD/VCR once, then press AUX once. The LED will blink twice. 4. The AUX key is now ready to be set up to control your second DVD player. See Programming Device Control on page 9. To re-assign other device keys to the AUX key, repeat steps 1 through 4 with a sequence from the below chart: NO...
Page 16 - PROGRAMMING FAVORITE CHANNEL SCAN; Using
PROGRAMMING FAVORITE CHANNEL SCAN In the DVD/VCR , CBL/SAT , or TV mode, you can store a list of up to 10 favorite channels, in any order, that will beimmediately scanned when FAV is pressed (see Using Channel Scan on the previous page). NOTE: Favorite channels can only be programmed for onemode. Af...
Page 17 - CHANGING VOLUME LOCK; Global Volume Lock
CHANGING VOLUME LOCK The One For All DVD Expert Universal Remote Controlis set at the factory for independent volume control ofeach selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device’s volume will be locked to one mode (e.g., to control TV volume ...
Page 18 - MANUFACTURER’S CODES; Setup Codes For Audio Amplifiers
CHANGING VOLUME LOCK (continued) Unlocking All Volume Control (RestoringDefault Setting) NOTE: Performing these instructions will restore independentvolume control for all programmed devices (e.g., TV volumecontrol in TV mode, VCR volume in DVD/VCR mode, etc.). 1. On the remote control, press and ho...
Page 19 - Setup Codes For Audio Receivers
Realistic 0395 Sansui 0321 Shure 0264 Sony 0689, 0220 Soundesign 0078, 0211 Technics 0308, 0521 Victor 0331 Wards 0078, 0013, 0211 Yamaha 0354, 0133 Setup Codes For Audio Receivers Aiwa 0121, 0158, 0189, 0405 Arcam 1120 Carver 0189 Denon 0004 Garrard 0463 Harman/Kardon 0110, 0189, 1304 Integra 0135 ...
Page 20 - Setup Codes For Cable Boxes
MANUFACTURER’S CODES (continued) Setup Codes For Cable Boxes ABC 0003, 0008, 0014, 0017Americast 0899 Bell & Howell 0014 Bell South 0899 Director 0476 General Instrument 0476, 0003, 0276, 0810 GoldStar 0144 Hamlin 0009, 0273Jerrold 0476, 0003, 0276, 0012, 0014, 0810 Memorex 0000 Motorola 0476, 0...
Page 22 - Setup Codes For PVRs
MANUFACTURER’S CODES Setup Codes For DVD Players (continued) Yamaha 0490, 0539, 0545, 0817 Yamakawa 0665 Zenith 0503, 0591, 0741 Setup Codes For Home-Theater-In-A-Box Devices Aiwa 1388, 1641 Alco 1390 Anam 1609 Apex Digital 1257 Audiovox 1390 Daewoo 1250 Fisher 1801 Integra 1298 JVC 1374 KLH 1390 Ko...
Page 23 - Setup Codes For TVs
Dish Network System 1005, 0775, 1775 DishPro 1005, 0775, 1775 Echostar 1005, 0775, 1775 Expressvu 0775, 1775 GE 0566 GOI 0775 General Instrument 0869 HTS 0775 Hitachi 0819 Hughes Network Systems 1142, 0749, 1749, 1242JVC 0775 Magnavox 0724, 0722 Memorex 0724 Mitsubishi 0749 Motorola 0869 Next Level ...
Page 28 - Setup Codes For VCRs
MANUFACTURER’S CODES (continued) Setup Codes For VCRs Admiral 0048, 0209 Adventura 0000 Aiwa 0037, 0000 American High 0035 Asha 0240 Audiovox 0037 Beaumark 0240 Bell & Howell 0104 Broksonic 0184, 0121, 0209, 1479 Calix 0037 Canon 0035 Carver 0081 Citizen 0037, 1278 Craig 0037, 0047, 0240 Curtis ...
Page 30 - Setup Codes For VCR/DVD Player Combos
MANUFACTURER’S CODES Setup Codes For VCRs (continued) Sony 0035, 0032, 0000, 0636, 1232 Sylvania 0035, 0081, 0000, 0043, 1781 Symphonic 0000 TMK 0240 Teac 0000 Technics 0035, 0162 Teknika 0035, 0037, 0000 Thomas 0000 Tivo 0618, 0636 Toshiba 0045, 0043, 0845 Totevision 0037, 0240 Unitech 0240 Vector ...
Page 31 - TROUBLESHOOTING
31 TROUBLESHOOTING PROBLEM: LED (red light) does not blink when you press a key. SOLUTION: Replace batteries with two new AAA alkaline batteries. PROBLEM: LED blinks when you press a key, but home entertainment device does notrespond. SOLUTION: Make sure the remote control is aimed at your home ente...
Page 32 - INSTRUCTIONS TO THE USER
32 INSTRUCTIONS TO THE USER This equipment has been tested and found to complywith the limits for a class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed toprovide a reasonable protection against harmful inter-ference in a residential installation. This equipmentgene...
Page 33 - LIFETIME WARRANTY
33 LIFETIME WARRANTY One For ALL ("OFA") warrants this product to be freefrom defects in materials and workmanship, undernormal use, throughout the period of the product’sownership by the original purchaser. This warrantydoes not cover damage or failures caused by productsor services not sup...
Page 34 - ADDITIONAL INFORMATION
34 ADDITIONAL INFORMATION As you update your home entertainment system, OneFor All® has a universal remote control that will fit yourneeds. Look for these exciting products at a retailernear you. One For All Access 3 . . . . . . . . . . . . . . . . . . . . . URC-3605 One For All Big Easy 3-Device . ...
