Page 2 - Total Control; Owner’s Manual; Visit the; Contact Support; My Installer/Programmer; T e c h n i c a l S u p p o r t; Navigating the Intercom Menu 19
Total Control TKP-7600 Owner’s Manual Rev 1.0 Introducing the TKP-7600 Thank you for purchasing URC’s TKP-7600 In-Wall Network Keypad. Its easy andintuitive use helps to simplify your life while adding control of more things than youthought possible. Online Support Total Control is sold direct only ...
Page 3 - Features and Benefits; Enjoy these key features:; Updated User Experience
1 Total Control TKP-7600 Owner’s Manual Features and Benefits The TKP-7600 In-Wall Network Keypad is one of URC’s most advanced devices that isoptimized for usage with Total Control. Enjoy these key features: Updated User Experience This device has the capability of using URC’s Total Control softwar...
Page 5 - Part List; • 4x - Mounting Screws; Mounting Ring
3 Total Control TKP-7600 Owner’s Manual Part List Included in the TKP-7600: • 1x - TKP-7600 Network Keypad • 1x - Mounting Ring • 4x - Mounting Screws • 4x - Spacers TKP-7600 Mounting Ring Spacers Mounting Screws
Page 6 - Installation; • PoE Injector; shielded Ethernet; cable is preferred. The IEEE; Using the Spacers
4 Total Control TKP-7600 Owner’s Manual Installation The TKP-7600 is wall mountable and fits into a standard dual gang (J-box orMud Ring) opening. Prior to installation, make sure power is available at thepreferred location. Power can be supplied to the TKP-7600 through an Ethernet (RJ45) cable conn...
Page 7 - Follow the steps below for installation:
5 Total Control TKP-7600 Owner’s Manual Wall Mounting Follow the steps below for installation: 1. Assure the dual-gang opening is fitted with the standard two-gang retro-box (available at almost any electronic supplier). 2. Mount the wall-plate to the two-gang retro-box. 3. Connect the Ethernet cabl...
Page 8 - Main Menu Navigation; Actual navigation is performed via screen swipes:
6 Total Control TKP-7600 Owner’s Manual Main Menu Navigation Although specific screen design and certain options are dictated by the customintegrator that programmed the Total Control system, the general layoutremains the same. Actual navigation is performed via screen swipes: • Left Swipe: Swipe le...
Page 9 - This is the default view mode and it
7 Total Control TKP-7600 Owner’s Manual Main Menu: View Modes Total Control features two different view modes for theTKP- 7600. Each view mode has its own unique propertiesthat compliment the user experience. The view mode must be programmed from within the Acceleratorsoftware, speak to a custom hom...
Page 10 - Title Bar; Select this to hide the Title Bar Menu.
8 Total Control TKP-7600 Owner’s Manual Title Bar The Title Bar is always present regardless of what menu and/or room the TKP-7600 is currently using. On the left of the Title Bar , the current room the TKP-7600 is controlling is displayed. Selecting it reveals the Rooms Menu . At the right of the T...
Page 12 - button, this displays the; Room Linking Menu; in the system to link. Only rooms that are DMS; Check
10 Total Control TKP-7600 Owner’s Manual Room Linking Remember, Room Linking can only be used by DMS Zones/Areas. The followingsteps take place from within the Room’s Menu: 1. Select the Room Link button, this displays the Room Linking Menu . 2. Select which rooms in the system to link. Only rooms t...
Page 13 - In the example at the right,; Now Playing; reads “
11 Total Control TKP-7600 Owner’s Manual Now Playing On the right hand side of the Title Bar is the Now Playing area. The NowPlaying area always dictates what activity is currently playing in the room. In the example at the right, Now Playing reads “ SNP-2 Pandora ”. This means that in the Home Thea...
Page 14 - Core Buttons; Used to control an active audio device.; Mute
12 Total Control TKP-7600 Owner’s Manual Core Buttons These buttons are almost always on display. Each one of these buttons has aspecific function: A. Volume: Used to control an active audio device. B. Shortcut Popup: Use this to display the Shortcut Popup Menu. This menu contains up to six (6) curr...
Page 15 - The; Shortcut Popup Menu; holds the end-user’s favorite or most; Adding Shortcuts; Follow these steps to add a Shortcut:
13 Total Control TKP-7600 Owner’s Manual Shortcut Popup Menu The Shortcut Popup Menu holds the end-user’s favorite or most frequently used devices/activities and places them in one easy toaccess location. Adding Shortcuts Follow these steps to add a Shortcut: 1. Locate an available button and hold i...
Page 16 - ) items and each item must already be a device/activity; Removing Shortcuts; Follow these steps to remove a Shortcut:; press and hold; the Shortcut that; Remove a Shortcut
14 Total Control TKP-7600 Owner’s Manual Just tap on a Shortcut button to launch that device/activity. Remember, this menucan only hold up to six ( 6 ) items and each item must already be a device/activity programmed into that current room. Removing Shortcuts Follow these steps to remove a Shortcut:...
Page 18 - The icons here represent the current page
16 Total Control TKP-7600 Owner’s Manual B. Page Indicator: The icons here represent the current page number the interface is on. However, the icon located to theleft is the Scenes Menu icon. All icons to the right of thatrepresent page numbers. C. Time: This is always present on the right hand side...
Page 19 - Intercom; ) different types of intercom calls that can be made:
17 Total Control TKP-7600 Owner’s Manual Intercom The TKP-7600 has the capability of communicating across the home network to anyIntercom-Enabled client (interface). There are three ( 3 ) different types of intercom calls that can be made: 1. Audio-Video: This type of call uses the camera and microp...
Page 20 - This type of call is audio communication
18 Total Control TKP-7600 Owner’s Manual 3. Audio Broadcast Call: This type of call is audio communication between two or more clients. An ideal way to communicated acrossmultiple Intercom-Enabled interfaces in almost any home.
Page 21 - As mentioned on; In the case where a 3rd party door station has
19 Total Control TKP-7600 Owner’s Manual Navigating the Intercom Menu As mentioned on page 6 of this document, accessing the Intercom button is performed by swiping down on the Title Bar . After selecting the Intercom button from the Title Bar Menu, the Intercom Menudisplays. This menu presents the ...
Page 22 - Select an available client from the; Intercom Menu; almost always displayed after selecting an available client.
20 Total Control TKP-7600 Owner’s Manual Making Calls: Audio-Video Remember that the Intercom feature must be enabled from with in the SettingsMenu. The following steps take place from the Intercom Menu, to access this menurefer to page 6 : 1. Select an available client from the Intercom Menu . Afte...
Page 23 - Use the; Volume Slider; at the right of the video feedback to raise or slower; End Call
21 Total Control TKP-7600 Owner’s Manual Once the call is accepted, the TKP-7600 provides auditory and visual two-wayfeedback on the screen. Use the Volume Slider at the right of the video feedback to raise or slower the volume. Slide the indicator to the top for maximum volume or slide it downto th...
Page 24 - . The following steps take place from the
22 Total Control TKP-7600 Owner’s Manual 1 2 Making Calls: Audio Calls Remember that the Intercom feature must be enabled from with in the Settings Menu . The following steps take place from the Intercom Menu , to access this menu refer to page 6 : 1. Select an available client from the Intercom Men...
Page 25 - at the right of the call icon area to raise or slower the; Audio Call
23 Total Control TKP-7600 Owner’s Manual Once the call is accepted, the TKP-7600 provides two-way communicationbetween clients via audio only. Use the Volume Slider at the right of the call icon area to raise or slower the volume. Slide the indicator to the top for maximum volume or slide it down to...
Page 29 - Scenes Menu
27 Total Control TKP-7600 Owner’s Manual Scenes Menu The Scenes Menu is dictated by the system programmer. Access this menu by swipingto the right from the Main Menu. The Scenes Menu can contain up to a hundred (100) Scenes (buttons) per room. Keep inmind that the Scene Menu is unique to each room. ...
Page 30 - Settings Menu; Most settings do; NOT; require interaction with the end-user. Changing some; URC Technical Support; These are the available options:
28 Total Control TKP-7600 Owner’s Manual Settings Menu Access the Settings Menu by sliding the Title Bar and selecting the Settingsbutton, refer to page 6 for more details. Most settings do NOT require interaction with the end-user. Changing some settings could cause issues with the Total Control sy...
Page 32 - The following can have its
30 Total Control TKP-7600 Owner’s Manual General Using the left and right arrow keys, enter the valuesof each category: 1. Date: The following can have its value changed: • Month • Day • Year 2. Time: The following can have its value changed: • Hour • Minutes • Seconds • AM/PM • 12 Hour/24 Hour 3. A...
Page 33 - ) button to lower the TKP-7600’s audio output or press the plus; Brightness; The TKP-7600 is equipped with an ambient light
31 Total Control TKP-7600 Owner’s Manual Sound Press the minus ( - ) button to lower the TKP-7600’s audio output or press the plus ( + ) button to increase the volume. Additionally, dragging the slider to the right increase the audio output whiledragging it to the left decreases it. Brightness Press...
Page 34 - ) button to lower the sensitivity on the TKP-7600’s; Enable Proximity Sensor; : By default this check box is
32 Total Control TKP-7600 Owner’s Manual Proximity Sensor Press the minus ( - ) button to lower the sensitivity on the TKP-7600’s Proximity Sensor or press the plus ( + ) button to increase the sensitivity. Additionally, dragging the slider to the right increases the sensitivitywhile dragging it to ...
Page 37 - Set Intercom Notification Sound:
35 Total Control TKP-7600 Owner’s Manual Intercom The Audio-Video Intercom Settings menu is the location where the Intercomfeatures must be enabled. By default this feature is disabled, it must be enabledin order for the TKP-7600 to communicate with other Intercom-Enabled devices. • Enable Intercom ...
Page 38 - This should only be attempted by a
36 Total Control TKP-7600 Owner’s Manual Factory Default This should only be attempted by a custom install professional that is familiar with Total Control or under instruction from URC Technical Support . Selecting this option resets the TKP-7600 to its factory state and does not functionuntil the ...
Page 39 - Specifications; These are the technical specifications for the TKP-7600:; Limited Warranty Statement; The terms and conditions of the End User Agreement available at; Federal Communication Commission Interference Statement; • Reorient or relocate the receiving antenna.
37 Total Control TKP-7600 Owner’s Manual Specifications These are the technical specifications for the TKP-7600: Microprocessor: Cortex-A9 Dual 1Ghz Memory: 4GB eMMC, 1GB RAM Devices: Supports up to 255 devices Pages: Supports up to 255 pages on each device Macro Capability: Up to 255 steps Network:...
Page 40 - Regulatory Information to the User; 014/30/EU issued by the commission of the European Community.
38 Total Control TKP-7600 Owner’s Manual Regulatory Information to the User • CE conformity Notice Products with “CE” marking comply EMC Directive 2014/30/EU issued by the commission of the European Community. 1. EMC Directive • Emission• Immunity• Power • Declaration of Conformity “Hereby, Universa...
