Uniden XS1215 +1 - Manual

[5] Terms Used in this Manual • Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The key has not been pressed and there is no dial tone. • Talk Mode - The handset is off the cradle and the key has been pressed, enabling a dial tone. • CID - Caller ID • CIDCW - Calle...

Installing the Phone Do the following steps: A. Choose the best location B. Install the rechargeable battery pack into the handset C. Connect the base unit and charging cradle (XS1215+1 only), and charge the handset D. Mount the base unit on a wall E. Choose the dialing mode When choosing a location...

B. Install the Rechargeable Battery Pack into the Handset The handset(s) are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the charging cradle. 1) Press down on the handset battery case cover (use the finger indention for a better grip) and ...

C. Connect the Main Base and Charging Cradle (XS1215+1 only), and Charge the Handsets 1) Connect each AC adapter to the jack and to each standard AC wall outlet. 2) Place one handset in the main base (and the other in the charging cradle - XS1215+1 only) with the keypad facing forward. 3) Make sure ...

D. Mount the Main Base on a Wall Standard wall plate mounting DC IN 9V 240V TEL LINE This phone can be mounted on any standard wall plate. 1) Locate the base unit on the wall mount adapter as shown and slide the wall mount adapter into the notches on the base bottom with the tab pressed. 2) Plug the...

Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try t...

Headset Installation Your phone may be used with an optional headset . To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com.au or www.uniden.co.nz.) [11]

Register Handsets to the Main Base before Using! (XS1215+1 only) Whichever handset you choose to charge in the main base will automatically register to the main base. The second handset (charging in the extra charging cradle) MUST also be registered to the main base before use. Follow the steps belo...

Basic Setup There are four basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Name Tag and Insert 0. CIDCW option can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Handset 1 shows ...

Setting Insert 0 This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off. 1) When the phone is in standby mode, press and hold the . The following screen appears. 2) Press the key three time...

Selecting the Ring Tone and Volume Your phone has five different ringer tone/volume combinations you can choose from. 1) With the phone in standby mode, press the key. 2) The phone will sound the different ring tones at different volumes. To turn the ringer off, select . 3) When the phone sounds the...

Using Your Phone Making and Receiving Calls Making a call Receiving a call h, , Hanging up 1) Remove the handset from the cradle. 2) Press the key. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the key. 1) Remove the handset f...

Transferring a Call (XS1215+1 only) Redialing the Last Dialed Number Your cordless phone allows you to transfer outside calls from handset to handset; only one handset at a time can talk with an outside caller. The second handset cannot go off hook to listen to conversations or make an outgoing call...

Selecting a Different Channel Find Handsets If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. While using your phone, press the key (XS1215) or the key (XS1215+1). appears on the display, indicating the phone is changing to another...

Storing Caller ID Messages in Speed Memory Locations Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory dialing. For instructions on viewing the Caller ID Message list, see page 29. 1) Press the key. Select the phone number to be stored from the Caller ID list by ...

Making Calls from Speed Dial Memory Easy Dial (New Zealand only) 1) Press the key. The handset displays your programmed speed dial number. 2) Enter the number - ), or press the key to select the speed dial number you would like to dial. 3) Press the key. and the number selected appear on the display...

Caller ID and CIDCW (Caller ID on Call Waiting) You must subscribe to Caller ID service through your local telephone provider to use this feature. CIDCW (Caller ID on Call Waiting) is currently available in Australia only. When the telephone rings, the Caller ID feature allows you to view the caller...

Viewing the Caller ID Message List The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. You can also view the Caller ID list during a call. 1) Press the key.The summary screen displays the number of new messages and total messages. 2) Use the key to scroll throu...

Deleting Information from the Caller ID List If the phone receives more Caller ID messages than it can store, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually. 1) Press the key in standby mode. Find the message to be deleted from the Caller ID list by ...

Making a Call from the Caller ID List Caller ID on Call Waiting (CIDCW) You can place a call from the Caller ID list. 1) Press the key in standby mode. Select the phone number that you want to dial by pressing the key. 2) Press the key. The displayed phone number dials automatically. With CIDCW, you...

Changing the Digital Security Code To protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides (which electrically locks your phone when each handset is in the cradle) and digital security which automatically selects one o...

Note on Power Sources Low battery alert Battery replacement and handling Warning: When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, appears on the LCD and none of the keys will operate. If the...

Cleaning the battery charging contacts Caution: To maintain a good charge, clean the charging contacts on the handset once a month. Dampen a cloth with plain water. Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning th...

General Information Operating temperature: AC Adapter Information Battery Information www.uniden.com.au or www.uniden.co.nz 0 °C to +50 °C (+ 32 °F to +122 °F) AC Adapter part number: AAD-210 Input Voltage: 230-240VAC 50Hz Output Voltage: 9V DC 210mA Battery part number: BT-905 Capacity: 600mAh, 3.6...

Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, visit our website for further information (www.uniden.com.au or www.uniden.co.nz). Symptom Suggestion Symptom Suggestion The LED or LED won't illuminat...

Liquid Damage Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps. Case Action If the handset or base is exposed to moisture or liquid, but it only affects the exterior plastic housing. If moisture or liquid has entered the plastic- h...

Index A B C D E,F, G, H, I,J,K,L M, N, O, P, Q R S T,U V,W ,X ,Y,Z AC adapter information 35 Basic setup 14 Battery pack Information 35 Installing 7 Preparing and charging 7 Replacement and handling 33 Beltclip installation 10 Call transfer feature 19 Call waiting 21 Caller ID service 28 Deleting 30...

Important:Warrantor: ELEMENT OF WARRANTY: WARRANTY DURATION: PARTS COVERED: STATEMENT OF REMEDY: PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: Evidence of original purchase is required for warranty service. Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Uniden warra...

THANK YOU FOR BUYING A UNIDEN PRODUCT. (c) 2005 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China UPZZ01060ZZ