Uniden XC600/700 - Manual

Introduction Congratulations on your purchase of the Uniden XC600/700 SERIES Cordless Telephone. These phones are designed to exacting standards whichprovide reliability, long life, and outstandingperformance. This series of phones is available in designercolors which are designated by differentmode...

Included with the XC600/700 SERIES If any of these items are missing or damaged,contact Uniden Customer Service at:(800) 297-1023, 8:00 a.m. to 5:00 p.m. Central,Monday through Friday. Handset pag e/find 25 CHANNE L PLUS ULTRA CLEAR Extend A Phone • • Base Unit Rechargeable Battery AC Adapter Short ...

Important Electrical Considerations Unplug all electrical appliances when you know anelectrical storm is approaching. Lightning can passthrough your household wiring and damage anydevice connected to it. This phone is no exception. Warning: Please do not attempt to unplug any appliance during an ele...

Installation Selecting a Location Before choosing a location for your new phone,there are some important guidelines you shouldconsider: • The location should be close to both aphone jack and continuous power outlet. Note: A continuous power outlet is an AC outlet which does not have a switch tointer...

Telephone Line Outlets There are two types of phone outlets: Modular Jack Most phone equipment available now usesmodular jacks. Phone cords are fitted witha molded plastic connector which plugsinto this type of jack. If you do not have modular phone jacks, contact your localtelephone company for inf...

Desk or Tabletop Installation 1. Place the Base on a desk or tabletop. 2. Plug the AC Adapter cord into the 9V DCinput jack on theBase Unit. 3. Place the AC Adapter cord around thestrain relief. 4. Plug one end of the long telephone cordinto the TEL LINE jack on the Base Unit. DC IN 9V PULSE–T ONE T...

Wall Installation Standard Wall Plate Mounting These phones are designed to be mounted on astandard AT&T or GTE wall plate. 1. Plug the AC Adapter into the Base Unit. 2. Place the AC Adapter cord inside themolded channel. 3. Plug one end of the short telephone cordinto the TEL LINE jack on the B...

Direct Wall Mounting If you do not have a standard wall plate, you canmount your phone directly on a wall. Beforemounting your phone, consider the following: • Select a location away from electricalcables, pipes, or other items behind themounting location that could cause ahazard when inserting scre...

7. Plug the other end of the telephone linecord into the wall jack. 8. Plug the AC Adapter into a standard 120VAC wall outlet. Note: Do not use an outlet controlled by awall switch. Setting the Handset Retainer The handset retainer holds the Handset in place ifyour phone is mounted on a wall. The st...

Setting Up Your Phone Extending the Antenna Before using your phone, be sure to raise itsantenna to the vertical position. Installing the Handset Battery Pack 1. Press in on the Battery CoverRelease. 2. Slide the battery compartment coverdown. charge 20

3. Align the plastic connector of theNickel-Cadmiumbattery pack with itssocket and plug it in. Note: The black lead will be on the leftwhen the plug isproperly aligned. 4. Place the battery pack inside thebattery compartment,and slide the batterycover back on. Note: The built-in Memory Backup featur...

Cleaning the Battery Contacts To maintain a good charge, it is important to cleanall charging contacts on the Handset and Base Unitabout once a month. Use a pencil eraser or othercontact cleaner. Do not use any liquids or solvents. page/find 25 CHANNEL PLUS ULTRACLEAR Extend A Phone • • Contacts 1 3...

Charging the Battery Pack Initial Battery Charging The rechargeable Nickel-Cadmium battery packmust be fully charged before using your phone forthe first time. We recommend that the battery packcharge for approximately 15-20 hours, withoutinterruption, before plugging the phone line into yournew pho...

Charging from the Charging Cradle (Only for the XC700 SERIES phones.) 1. Plug the Charging Cradle AC Adaptercord into the DCInput Jack on theCharging Cradle. 2. Place the AC Adapter cord around thestrain relief. 3. Plug the AC Adapter into a standard 120VAC wall outlet. Note: Do not use anoutlet con...

Continuous Battery Charging For the best battery performance, return theHandset to the Base Unit at the end of the day. Thiskeeps the battery fully charged, so your phoneworks best. Low Battery Indicator When the BatteryPack in the Handsetis very low and needsto be charged, the TALK/BATT LOW LED fla...

Setting the Pulse/Tone Switch Be sure the PULSE/TONE switch is in the TONE position. Note: Most phone systems are Tone dialing. Checkwith your local phone company if you arenot sure whether your system is Tone orPulse dialing. Adjusting Ringer Controls To adjust the ringervolume of yourHandset, pres...

Automatic Digital Code Security To avoid unauthorized calls on your phone, a DigitalCode was added to all XC600/700 SERIES phones. This Digital Code is shared only betweenthe Handset and Base Unit. The Code is set automatically when you first use the phone. To change the Digital Code, be sure the Ha...

Using Your Phone Making and Receiving Calls The following features of the XC600/700 SERIES phones are different depending on the Handset’slocation when you make or receive a call. HANDSET ON BASE HANDSET OFF BASE ANSWERCALL Pick up Handset(AutoTalk) Press MAKECALL 1) Pick up Handset2) Press3) Listen...

Changing Channels, Flash, andPage/Find To change channels or access call waiting while thephone is in use, or to use the one-way page tolocate the Handset, follow these steps: PRESS THESE KEYS YOU WILL HEAR CHANGINGCHANNELS Press Note: Change channels to helpeliminatebackground noise. A click simila...

Programming Your Phone All programming functions must be completed whenyour phone is in the standby mode becauseprogramming keys do not function while you are onthe phone. Storing a Number in Memory 1. Remove the Handset from the Base Unit. 2. Press M . The TALK/BATT LOW LED blinks. 3. Enter the num...

Storing a Mixed Number If your phone is set up for Pulse dialing, you canstore a mixed mode number so that you can easilyaccess long distance services. 1. Remove Handset from the Base Unit. 2. Press M . The TALK/BATT LOW LED blinks. 3. Enter the number to be dialed in pulsemode. 5551212 1 3 2 4 5 6 ...

Dialing a Stored Number To dial a number previously stored in memory,follow these steps: 1. Remove the Handset from the Base Unit. 2. Press A . 3. Press M . page/find 25 CHANNEL PLUS ULTRA CLEAR Extend A Phone • • 1 3 2 4 5 6 7 8 0 Q 9 def abc ghi jkl mno pqrs tone mem r.tone r.vol chan pause volume...

4. Press the memory location number (0-9). Chain Dialing On certain occasions, after dialing a number, youmay be requested by the party or service you arecalling to enter a special access code, such aswhen performing a banking transaction. To do this,simply: 1. Store the access code into one of the ...

Troubleshooting If your XC600/700 SERIES Cordless Telephone is not performing to your expectations, please trythese simple steps. If you are still unable to resolvethe problems, contact Uniden Customer Service at(800) 297-1023, 8:00 a.m. to 5:00 p.m. Central,Monday through Friday. Problem Suggestion...

Specifications General – The XC600/700 SERIES complies with FCC Parts 15 and 68. Frequency Control PLL Modulation FM Operating Temperature – 10 ° to 50 ° C Base Unit Receive Frequency 48.76 to 49.99 MHz (25 Channels)Transmit Frequency 43.72 to 46.97 MHz (25 Channels)Power Requirements 120V AC 60 Hz ...

Extend .A.Phone ® Operating Guide Operating Guide UDZZ01384FZ pag e/find 25 CHANNEL PLUS ULTRA CLEAR Extend A Phone • • XC 600/700 Series

PRECAUTIONS Before you read anything else, please observe the following: WARNING! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire,electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. RECHARGEABLENICKEL-CADMIUMBATTE...

Controls and Functions page/find 25 CHANNEL PLUS ULTRACLEAR Extend A Phone • • 11 12 charge 1 3 2 4 5 6 7 8 0 Q 9 def abc ghi jkl mno pqrs tone mem r.tone r.vol chan pause volume talk talk batt low flash/rdl tuv oper wxyz 1 6 8 7 9 10 5 23 4 1 3 2 4 5 6 7 8 0 Q 9 def abc ghi jkl mno pqrs tone tuv op...

One-Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be freefrom defects in materials and craftsm...