Uniden UH013 - Manual - manualsarea.com

Page 2 - UNIDEN Model UH013 UHF CB Radio; Contents

Introduction 2 Features 2 Preventive Maintenance 2 Troubleshooting 2 Controls / Connectors 3 Indicators 4 Included with your UH013 5 Mounting Options 6 Operation 8 Setting the Squelch 8 Monitor 8 Selecting a Channel 9 Transmitting 9 Using Repeater Channels 9 Operating the UH013 in Duplex Mode 10 Sca...

Page 3 - Optional Tone Squelch Unit Function; Introduction; NOTE; If the transceiver is completely inoperative:; Check the power cord and fuse.; If there is trouble with receiving:; Check the VOLUME control setting. Be sure the SQUELCH is adjusted; If there is trouble with transmitting:; Check that the transmission line (coaxial cable) is; securely connected

Preventive Maintenance: The following system checks should be made every six to twelve months: Check the Standing Wave Ratio (SWR). Inspect the tightness of all electrical connections. Inspect the antenna coaxial cable for wear or breaks on the shielding.Inspect the tightness of all screws and other...

Page 4 - Controls / Connectors; Front; Controls and Connectors; Page

UNIDEN Model UH013 UHF CB Radio Controls / Connectors 3 UHF ANT. EXT.SP. DC 13.8V 6 4 5 9 10 11 12 1 2 3 8 15 13 14 Front Rear 7 Liquid Crystal Display (LCD) Rotary Channel Selector On/Off Volume Push to Talk (PTT) Button Tone Call Monitor Button SLCT - Select Button SRCH - Search Button SCAN - Open...

Page 5 - Indicators

UNIDEN Model UH013 UHF CB Radio Indicators 4 SCN - Scan SLT - Select SRC - Search HLD - Hold BCL - Busy Channel Lockout SQT - Squelch Tight M - Memory - Channel Number - CTCSS Code S/RF - RF Signal Strength VOX - Voice Operated Microphone CTCSS - Continuous Tone Coded Squelch System INS - Instant Ch...

Page 6 - Included with your UH013

5 UH013 Owners Manual OWNER’S MANUAL UNIDEN Model UH0 13 UHF CB Radio Microphone Hanger, Screws and Washers DC Power Cord with Fuse Display Mount Bracket Display Unit Microphone Consumer Support Card Uniden Australia Pty Limited Attn: Service Division 345 Princes Highway Rockdale NSW 2216 AUSTRALIA ...

Page 7 - Mounting Options; Mounting the complete radio (Transceiver with Display Unit); Hinge the Display Unit into the

UNIDEN Model UH013 UHF CB Radio Mounting Options Mounting the complete radio (Transceiver with Display Unit) Remote mounting of the Transceiver Unit 6 The radio can be mounted complete - or - with the Display Unit remote of the Transceiver. a) Plug in display cable from the Display Unit to the trans...

Page 8 - Top fix; Remote mounting of the Display Unit

Fixing the Display Rear Bracket To mount the Display Unit it needs tobe fitted with a Display Rear Bracket(included in package). a) Position the Display Rear Bracketso that one end fits over the two studs at the end of the Display Unit. b) Push it into place until the fixing screw hole is aligned wi...

Page 9 - Setting the Squelch; Press the; button on the microphone to open the squelch and receive all; MONI; button for 2 seconds to hold the squelch; MONI; again momentarily to cancel.; Monitor; MONI; Operation

Turn the Unit ON by rotating thevolume control clockwise.The UH013 has 2 Levels PresetSquelch. It requires no adjustment.However, if you are in a very highnoise area it may break through.Press to select the tight squelchmode. The SQT icon appears. Setting the Squelch Strong Signals Medium Signals We...

Page 10 - Selecting a Channel; Transmitting; Select the desired channel. Press the Microphone’s; button and speak normally; PTT; button; PTT

The Signal coming from your radio is received by the Repeater Station and then retransmitted at the same timeon another channel. This operation is called "Duplexing".For example, CH01 on Duplex Mode will Receive on CH 01 but Transmit on CH31CH02 on Duplex Mode will Receive on CH 02 but Trans...

Page 11 - Press and hold; Scanning; button on the microphone.

UNIDEN Model UH013 UHF CB Radio Operation Press and hold for 2 seconds to switch Duplex ON. The DUP icon appears.If Duplex is not required - press and hold for2 seconds again to switch Duplex off.Only channels 01 - 08 are available for Duplex 10 NOTE Check with your local Retailer forinformation on ...

Page 12 - Programming Scan Channels; icon appears and

To deactivate SCAN, press the buttonor the PTT button.Press and hold for 2 seconds to turnoff Group Scan Mode. UNIDEN Model UH013 UHF CB Radio Operation 11 If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. Ifthe received signal ceases, P...

Page 13 - Busy Channel Lockout; Recalling the Instant Channel; VOX Operation (optional VOX headset required); Programming the Instant Priority Channel

12 If the channel is already in use, you can preventthe UH013 from transmitting . This is particularlyimportant when using CTCSS.Press 2 times. Turn the Rotary ChannelSelector to display . Press and hold for 2 seconds to store the new setting. SLCT SLCT Busy Channel Lockout If a button is not presse...

Page 14 - Wide Band Scanning; Band; store the new setting.; C T C S S (Continuous Tone Coded Squelch System)

13 Turn the Rotary Channel Selector to the desiredchannel to use CTCSS. Press and hold for 2 seconds. CTCSS icon flashes.Turn the Rotary Channel Selector to select thedesired CTCSS code 01 - 38. Press once to store the new setting. Rotary ChannelSelector Channels 05 and 35 are Emergency Channelsand ...

Page 15 - Searching; Skip; Scanning Stored Frequencies; HLD; Programming Scan Frequencies; Deleting stored frequencies

14 UNIDEN Model UH013 UHF CB Radio Operation Searching Searching checks every frequency within the Band. If an active channel is located the UH013 will stop on thatchannel until 2 seconds after the transmission ends, then continue.Search Hold1. To stop the search, press at any time. HLD is displayed...

Page 16 - Outline; Optional Selective Calling system; Call Alarm; Scans only tone squelched Channels.; Tone Calling; Allows you to selectively call another radio.; Group Calling Capability; Transmits and Responds to Group Calls.; Selective Calling (Optional Selcall PCB Required)

15 Outline Selective Calling (SELCALL) is a special Sequential Tone Squelch System that allows the user to receive/transmitcalls selectively from/to an individual or group, on a shared busy channel. The UH013 has an Optional Selective Calling system . Exceptional features, like Receiver Quieting, To...

Page 17 - Frequency & CTCSS Tone Lists; CTCSS TONE List; Simplex Mode

UNIDEN Model UH013 UHF CB Radio Frequency & CTCSS Tone Lists 16 NOTE: Channel 05 11 and 35 are not CTCSS programmable. CTCSS TONE List Tone No. 010 203040506070809101112 13141516171819202122 2425 26272829303132333435363738 23 OFF 67.071.974.477.079.782.585.488.591.594.897.4100.0 Tone Frequency (...

Page 18 - ONE YEAR LIMITED WARRANTY; ELEMENTS OF WARRANTY:; In the event that the Product does not conform to this warranty at; PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY:; in the event that the Product; Warranty; AUSTRALIA

ONE YEAR LIMITED WARRANTY IMPORTANT: Evidence of the original purchase is required for warranty service. WARRANTOR: Uniden New Zealand Limited. Uniden Australia Pty Ltd. ACN 001 865 498 ELEMENTS OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty its UH013 (he...

Page 19 - 002 Uniden Australia Pty Limited / Uniden New Zealand Limited

C 2002 Uniden Australia Pty Limited / Uniden New Zealand Limited Printed in the PhilippinesPPC: UTZZ01887ZZ