Uniden UBW2101 - Manual - manualsarea.com

Page 2 - Important Safety Precautions; This manual contains important information about this product’s

2 Important Safety Precautions This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fir...

Page 3 - Warnings to Parents and Other Users; SAVE THESE INSTRUCTIONS!; safety instructions

3 Important Safety Precautions (cont’d) Warnings to Parents and Other Users Failure to follow these warnings and the assembly instructions could result in serious injury or death. This product is not designed or intended for use as a medical monitor, nor should this product be used as a substitution...

Page 4 - Contents

4 Contents What’s in the Box? 1 x Digital Wireless Camera1 x 3.5” LCD Digital Wireless Monitor1 x AC Adapter for Camera1 x AC Adapter for Monitor1 x Goose Neck Camera Stand with mount screws1 x Owner’s Manual # If any items are missing or damaged, contact our Customer Care Line immediately! Importan...

Page 5 - Parts of the Baby Monitoring System; Camera

5 Parts of the Baby Monitoring System Camera 1. Lens 2. IR (Infrared) LEDs 3. Light Sensor 4. Battery Indicator 5. Link Indicator 6. Power Indicator 7. Power/Lullaby play switch 8. Pairing Key 9. Reset 10. DC IN Jack 11. Power Adapter 12. Goose Neck Mount Stand LCD Monitor (Receiver) 1. Battery Indi...

Page 6 - Getting Started; Camera Connection; the green battery indicator turns off.; LCD Monitor Connection; using the monitor in portable mode.

6 Getting Started Step 1. Connection & Installation Camera Connection 2 DC IN 5V/1A 1 1. Connect the power cable to the camera’s DC IN jack, and then plug the power adapter to a standard 120V AC wall outlet. 2. Slide the power switch down once to turn ON the camera. # The built-in Lithium-Polyme...

Page 7 - Installing the Camera on the Goose Neck Mount Stand; Desktop mount option; Step 2: Basic Operation; I. Get to Know The Camera

7 Getting Started (cont’d) Installing the Camera on the Goose Neck Mount Stand Use the goose neck mount stand to install the camera at an appropriate angle in a semi-permanent (desktop mount option) or permanent (wall mount option) location . # Ensure the install location is within range of a standa...

Page 8 - LED off; II. Get to Know the LCD Monitor; ) Battery Indicator

8 Step 2: Basic Operation (cont’d) 1) Battery Indicator Green LED: Battery charging; charge battery until green LED turns off. Red LED: Battery low (portable mode); camera will turn off within 3 minutes. Connect the power adapter for charging or continuous use. LED off : Battery fully charged. 2) Li...

Page 9 - Step 3: Advanced Operation; I. Get to Know the Display Icons

9 Standard View Mode Menu Mode Quad View Mode 3) View Next Camera (CH1-4) Cursor Up Hot Key CH 1 4) Volume Down Cursor Left Hot Key CH 2 5) Lullaby Play Switch Cursor Down Hot Key CH 3 6) Volume Up Cursor Right Hot Key CH 4 7) Enter Menu Mode ESC (back) 8) Manual Record Delete Record File 9) Push to...

Page 10 - II. Get to Know the Main Menu; MENU; OK; OK

10 Advanced Operation (cont’d) II. Get to Know the Main Menu 1. Press MENU in standard view mode to display the main menu (the example shows the menu with the Brightness option highlighted). 2. Use / / ◄ / ► to highlight a menu option. ◄ Press OK to enter the setting menu. 3. Use / to select a setti...

Page 11 - Camera Setup

11 Advanced Operation (cont’d) II. Get to Know the Main Menu Camera Setup - Turn Camera(s) On/Off 1. Use ◄ / ► to select the camera you want to turn off. 2. Press OK to change ON/OFF status. # Make sure available cameras are set to ON for SCAN or Quad mode. Camera Setup - Camera Scan Period Pairing ...

Page 12 - Pairing; Power Saving; SD Card Format

12 Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) Pairing - Pairing a Camera 1. Use ◄ / ► to select a channel. 2. Press OK to start system countdown from 60 seconds. 3. Within the 60 second countdown, press PAIR at the camera side. The camera signal will display when pairing is c...

Page 13 - VOX Setting; Brightness

13 Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) VOX Setting - VOX Sensitivity (VOX is voice activation) Use ◄ / ► to adjust the VOX sensitivity level. Level 1 - low sensitivity.Level 3 - high sensitivity. # At OFF setting, the VOX function is disabled. VOX Setting - Enable VOX ...

Page 14 - Playback Mode

14 Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) Alarm Setup - Alarm Setup 1. Use ◄ / ► to move between the items. 2. Press OK to shift to ON/OFF. VOX alarm ON : The monitor will give an alarm for 15 seconds when the camera is triggered by voice. Battery low alarm ON : The monit...

Page 15 - About Digital Wireless Technology; Problem Diagnosis; About 2.4GHz Digital Wireless Signal; How to improve the wireless signal quality

15 About Digital Wireless Technology This section offers some helpful information to overcome most problems you may encounter. Problem Diagnosis About 2.4GHz Digital Wireless Signal This innovative digital wireless solution integrates advanced Frequency Hopping Spread Spectrum (FHSS) technology. Thi...

Page 16 - Troubleshooting Guide; Problems

16 Troubleshooting Guide If you have any trouble with your baby monitor, check this section first. If you need help, visit the customer support page of our website listed on the front cover. Problems Possible Causes Remedies System message shows “NO Signal” No power supply to camera (Battery low) Ch...

Page 17 - Product Specification; Camera Unit; Maximum Channels; Storage Media Management; SD Card Capacity; Lithium-Polymer Battery Warning; Recycling and Disposal Information

17 Product Specification Camera Unit Monitor Unit Maximum Channels 4 Communication Range 500 feet (300 m) in open space Resolution 320 x 240 (QVGA) Operating Temperature -10˚C (+14˚F) ~ +40˚C (+104˚F) Operation Voltage DC 5V / 1A DC 5V / 1A Current Consumption 680 mA (max) 680 mA (max) Night Vision ...

Page 18 - FCC Compliance Information; Part 15 Compliance Statement; CAUTION! Any changes or modifications to this equipment not; RF Exposure Information; IC Compliance Information; Radio Equipment Notice; CE Compliance Information

18 FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference...

Page 19 - One Year Limited Warranty

19 One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”).ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & c...

Uniden UBW2101 - Manual

Table of Contents:

Summary

Other Uniden Models