Page 3 - WarNING to PareNts aND otHer users; SAVE THESE INSTRUCTIONS!; FOR BEST RESULTS
WarNING to PareNts aND otHer users Failure to follow these warnings and the assembly instructions could result in serious injury or death. This product is not designed or intended for use as a medical monitor, nor should this product be used as a substitution for medical or parental supervision. Alw...
Page 4 - CoNteNts
Uniden surveillance products are not manufactured and/or sold with the intent to be used for illegal purposes. Uniden expects consumer’s use of these products to be in compliance with all local, state and federal law. For further information on video surveillance and audio recording legal requiremen...
Page 5 - oVerVIeW; Features; materials and other obstructions in wireless signal path.; Camera
5 oVerVIeW Features • Digital wireless technology provides excellent image quality and clarity • Interference free, secure, and private signal • Up to 500 ft. transmission range Maximum open space transmission range. The actual range varies depending on building materials and other obstructions in w...
Page 6 - monitor; usING tHe maNuaL
6 IR illumination range of 15ft./4.5m under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application. monitor • 2.3” color LCD monitor with superior image quality • Rechargeable lithium polymer battery for true portability • Audio...
Page 7 - Solving Problems. Troubleshooting tips are located here.
7 • Maintaining Your System. This section provides tips on how to keep your UBR223 hardware clean and in excellent working condition. • Solving Problems. Troubleshooting tips are located here. • Specification. This last section contains hardware and software specifications.
Page 8 - GettING starteD; WHat’s INCLuDeD; Screws and Anchors; moNItor INstaLLatIoN; feet from the crib.
8 GettING starteD WHat’s INCLuDeD The system comes with the following components: Digital Wireless Monitor (1) Digital Wireless Camera (1) Suction Cup Adapter Bar (1) AC Power Adapter (2) Screws and Anchors Owner’s Manual If any items are missing or damaged, contact our Customer Care Line immediatel...
Page 9 - to turn the unit on or off. Let the monitor charge for 6 hours prior to; Camera INstaLLatIoN; Placement Considerations; Out of range
9 3. Plug the power plug into a 120 volt AC (standard indoor) power outlet or surge protector.4. Press and hold PoWer to turn the unit on or off. Let the monitor charge for 6 hours prior to first time use so the built-in rechargeable monitor battery is fully charged. DO NOT remove the power cable fr...
Page 10 - Wall mount; Be sure to leave room for the mounting to fit over the screw heads.; suction mount; Clip the UBR223 on ledges and shelves.; Connect Power
10 Wall mount The UBR223 camera mounting clip has two slots that fit over screws to mount the unit on the wall. 1. Mark the position of the screw holes on the wall. 2. Drill holes and insert the anchors and screws provided. Be sure to leave room for the mounting to fit over the screw heads. 3. Place...
Page 11 - BasIC oPeratIoN; WIreLess Camera; Item; Camera Antenna: Sends and receives signals to or from the monitor.; Mounting; : Press this button to play lullabies. See page 28 for details.; LED night light bars.
11 BasIC oPeratIoN WIreLess Camera Item What it is 1 Camera Antenna: Sends and receives signals to or from the monitor. 2 Temperature sensor: Detects temperature at camera side and displays it on the monitor LCD. 3 PaIr : Pairs the camera to the monitor. 4 Mounting Clip: This fastener can attach the...
Page 12 - Light sensor: Measures light intensity on the camera side.; : Press to turn the night light ON or OFF.
12 Item What it is 12 Light sensor: Measures light intensity on the camera side. 13 Lens: Camera lens. 14 Microphone: Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. 15 Speaker: Produces the sound transmitted from the monitor. 16 PoWer : Turns the ca...
Page 13 - WIreLess moNItor; Monitor Antenna: Sends & receives signals to or from the camera.; • Increase speaker volume.
13 WIreLess moNItor Item What it is 1 Monitor Antenna: Sends & receives signals to or from the camera. 2 LED light bar. The left LED indicates power and the remaining LEDS indicate sound. 3 PoWer : Turns the camera on and off. 4 2.3 inch LCD screen. 5 ▲ Vol: • Increase speaker volume. • In Menus...
Page 14 - : Select a menu option or accept a setting.; • In Live view: Switch between available cameras.; : Remotely turn the camera night light ON or OFF.
14 Item What it is 8 CH ◄ : • In Menus: Scroll left. • In Zoom: Scroll left. • In Live view: Switch between available cameras. 9 Microphone. 10 ▼ Vol: • Decrease speaker volume. • In Menus: Scroll down. • In Lullaby: decrease volume. • In Zoom: Scroll down. 11 meNu/oK : Select a menu option or accep...
Page 15 - LCD DIsPLaY
15 LCD DIsPLaY Item Icon What it is 1 Signal Indicator (displays in full screen mode only). The number of bars in the signal indicator shows the strength of the signal received from the camera. One or no bars indicates the signal is poor, and 4 bars indicate a very strong signal. Signal Strength Ind...
Page 16 - icon; displays after the Lullaby indicator (item; Viewing modes
16 Item Icon What it is 2 CAM1 Camera Indicator. indicates which camera is displaying. Press CH ► or CH ◄ on the monitor to switch between available cameras. It will cycle in the following order: CH ► : CAM1—CAM2—CAM3—CAM4—QUAD—AUTO SCAN — CAM1 CH ◄ : CAM1—Auto SCAN—QUAD—CAM4—CAM3—CAM2—CAM1 3 77°F T...
Page 17 - to cycle through these modes.; Common operations; CAM1—CAM2—CAM3—CAM4—QUAD—AUTO Scan — CAM1
17 • Quad mode: Monitor displays video from all cameras on a single screen in 4 quadrants. Any channel that does not have a camera is blank. • Single mode: Monitor displays video from one camera at a time. • Scan mode: Monitor displays video from one camera at a time, but cycles through all cameras ...
Page 18 - sYstem meNu DesCrIPtIoNs; sYstem
18 sYstem meNu DesCrIPtIoNs Press meNu/oK to access system menus. Use the navigating buttons to navigate up ( ▲ Vol ) , down ( ▼ Vol ) , left ( CH ◄ ) , and right ( CH ► ) in the menus, then press meNu /oK to confirm a setting. Use CH ► or CH ◄ to focus on the 5 different system menu selections on t...
Page 19 - to increase/decrease the number for that setting.; or; to save the current setting and move to the next setting.
19 • Temp. alert range Date/time This option allows you to set the system date and time. The display format is Month.Day.Year Hour:Minute (Default = 01.02.2013 12:26) 1. From the System menu, select Date/Time and press meNu/oK . The Date/Time screen displays. 2. Press ▲ Vol or ▼ Vol to increase/decr...
Page 20 - Brightness; Factory reset
20 Brightness This option allows you to adjust the brightness level for each camera. (Default = 3) 1. From the System menu, select Brightness and press meNu/oK . The Brightness screen displays. 2. Press CH ► or CH ◄ to increase or decrease the brightness level (6 levels). 3. Press meNu/oK to save th...
Page 21 - Language; temperature Display unit; System
21 3. Press meNu/oK to save the setting and return to the main System options. Camera pairing settings and Date/Time setting will NOT be affected by a reset. Cameras will remain paired with the monitor. Language This option allows you to select the system’s display language from English, Español, or...
Page 22 - temperature alert range; Off
22 2. Press ▲ Vol or ▼ Vol to select ° C or ° F . 3. Press meNu/oK to save the setting and return to the main System options. temperature alert range Your UBR223 measures the ambient room temperature where the camera is. If the temperature falls outside of a preset range, the system alerts you. Temp...
Page 23 - On; aLert; Alert
23 5. Press CH ► or CH ◄ to toggle between On (Enable) or Off (disable). Either button will work. 6. Press meNu/oK to save the settings and return to the main System options. aLert Temperatures out of range or a camera out of range triggers alerts. This option allows you to set the alert volume. The...
Page 24 - VoX; From the main menu selections, select; High
24 VoX This option allows you to set the sound sensitivity for the camera. (Default = High) 1. From the main menu selections, select VOX and press meNu/oK . The VOX sensitivity screen displays. 2. Press ▲ Vol or ▼ Vol to select a level ( High , Low , or Off ). 3. Press meNu/oK to save the selection ...
Page 25 - Pair
25 Camera This option allows you to pair the monitor with cameras (up to 4 cameras supported) or to turn on/off an individual camera. The cameras are still powered on but no longer visible to the monitor. 1. From the main menu selections, select Camera and press meNu/oK . 2. The Camera options scree...
Page 27 - PoWer saVe; Power Save
27 4. Press ▲ Vol or ▼ Vol to select another camera. 5. Press meNu/oK to accept that setting and return to the Camera options screen. PoWer saVe Activating the Power Save feature turns off the LCD after two minutes of inactivity. This option allows you to enable or disable this function. (Default = ...
Page 28 - sPeCIaL Features
28 sPeCIaL Features Zoom Zoom displays the camera image in double size. Press ▲ Vol , ▼ Vol , CH ►, or CH ◄ to see the parts of the image not displayed on the LCD screen. Press Zoom again to return to normal view. NIGHt LIGHt You can control the UBR223 night light using the NIGHt LIGHt button on the...
Page 29 - usING tHe INterCom; to listen to the response.; Camera PaIrING; Pair the cameras to the monitor before mounting the cameras.
29 4. Press LuLLaBY sKIP to skip to Lullaby #3. The system plays Lullaby #3 then repeats it. 5. Press LuLLaBY sKIP to skip to Lullaby #4. The system plays Lullaby #4 then repeats it. 6. Press LuLLaBY sKIP to skip to Lullaby #1. The system plays Lullaby #1 then cycles through all lullabies. 7. Press ...
Page 30 - maINtaINING Your sYstem; moNItor
30 maINtaINING Your sYstem moNItor As you use your monitor, keep the screen clean by wiping it with a microfiber cloth to remove fingerprints, dust, etc. Camera When dust and grime builds up on the camera lens and glass, it affects the camera’s “vision.” Use a microfiber cloth to regularly clean the...
Page 31 - soLVING ProBLems; If
31 soLVING ProBLems If you have problems with the system, there is often a quick and simple solution. Please try the following: If Try There is no picture from the camera • checking all connections to the camera. Make sure the adapter is plugged in. • making sure that the cameras and monitor are bot...
Page 32 - sPeCIFICatIoNs; GeNeraL; RoHS Compliance
32 sPeCIFICatIoNs GeNeraL Camera Monitor Operating Frequency Range 2.400 ~ 2.4835GHz TX Power 15dBm NA RX Sensitivity NA –81dBm Type of Spread Spectrum Used FHSS Type of Modulation Used GFSK Communication Range 500ft. Line of Sight Camera Image Sensor TypeManufacturer/ Model # 1/6.5” Color CMOS Imag...
Page 34 - rF exposure Information; IC Compliance Information; radio equipment Notice; three-Year Limited Warranty
34 rF exposure Information The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.9”) from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. IC Compliance Information radio equipment Notice...
