Uniden SS E15+1 - Manual

Installing the Phone Do the following steps: A. Choose the best locationB. Install the Rechargeable Battery Packs into the HandsetsC. Connect the base unit and charging cradle and charge the handsetsD. Set the visual ringer brightness (optional)E. Mount the base unit on a wall (optional) A. Choose t...

[6] B. Install the Rechargeable Battery Packs into the Handsets Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base or charging cradle.1) Locate the separate battery and battery cover. 2) Plug the battery pack conne...

5) Once the handset battery packs are fully charged, connect the telephone cord to the tel line jack and to a telephone outlet. Ifyour telephone outlet isn't modular, contact your telephone company for assistance. 6) After the phone is connected, pick up the handset from the base and press talk. If ...

E. Mount the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate.1) Remove the wall mount adapter from the base and snap it into the notches on thebottom of the base. 2) Plug the AC adapter to the DC in 9V jack. 3) Wrap the AC adapter cord inside the...

[10] • Try to mount your phone within 1.5m of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #10 screws (minimum length of 35mm) with anchoring devices suitable for the wall material where the bas...

[12] Make sure to return the handsets to the cradles after each phone call. When to Re-register Handsets 1) You’ll need to re-register the second handset (follow steps on page 11) each time the digital security code is changed. Refer to page 33 for details regarding the Digital Security Code. 2) Whe...

Basic Setup There are four basic options that you will need to set up: AutoTalk, CIDCW (Caller IDon Call Waiting), Name Tag and Insert 0. CIDCW option can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Handset 1 shows i...

Setting the Insert 0 This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off. 1) When the phone is in standby mode, press the menu key. The following screen appears. 2) Press the volume/ /- ...

[16] Selecting the Ringer Tone and Volume Base ringer on/off The ringer on/off switch allows you to set the base ringer on or off. If you set the switch to off, you never hear the base ringer tone. Base ringer tone Press the ringer tone button in standby mode to select one of 7 ringer tones. Base ri...

Using Your Phone Making and Receiving Calls Making a call 1) Remove the handset from the cradle. 2) Press the talk key. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the talk key. Receiving a call 1) Remove the handset from th...

[18] Transferring a Call Your cordless phone allows you to transfer outside calls from handset to handset; only one handset at a time can talk with an outside caller. The second handset cannot go off hook to listen to conversations or make an outgoing call while the other handset is in use. To trans...

B A S IC S 4) Press the redial/pause key. OR 1) Remove the handset from the cradle. 2) Press the redial/pause key. 3) Press the talk key. Adjusting the Handset Earpiece Volume To change the earpiece volume, press volume/ /+ or volume/ /- key during a call. Audio boost As we get older, it often becom...

Selecting a Different Channel If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. This function works only when the phone is in use. Press the select/channel key. Scanning appears on the display, indicating the phone is changing to a...

You must subscribe to voice mail service from your telephone company in order to use this feature. The voice mail company will provide you with the access number. B A S IC S [21] Using Call Waiting If you have Call Waiting service, you can receive calls whileon the line. 1) If a call comes in while ...

Emergency Dial Emergency Dial is a one-touch speed dial key. Store your mostimportant or most frequently called number as your EmergencyDial number. Then, simply press the emergency ( ) key, and your phone will automatically dial the number. Storing the Emergency Dial 1) When the phone is in standby...

Using the Speed Dial Memory The speed dial memory allows you to store up to 10 names and numbers in each handset. You can dial these numbers with just a few key presses.The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your ...

4) Enter a name according to the instructions below, then press the select/channel key. If no name is required, go to step 5. • The name can be up to 13 characters.• Use the #/ and /tone/ keys to move the cursor to the desired location. • Use the delete/transfer key to delete characters as needed. •...

7) Press the select/channel key. You will hear a confirmation tone, and the following screen appears. Memory storage is complete.After about 2 seconds, the following screen displays all the speed dial memory entries. 8) Press the memory key to exit memory setup mode. The phone returns to standby. St...

[27] U S IN G T H E S P E E D D IA L M E M O R Y 4) Press the select/channel key. You hear a confirmation tone, and the number is stored in memory. The display returns to the Caller ID list. If a message has already been stored in the selectedmemory number location, a confirmation screenis displayed...

Caller ID and CIDCW (Caller ID on Call Waiting) You must subscribe to Caller ID service through your local telephone provider to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller's, phone number, date and time of call, and Name Tag (POP ID) feature allow...

! In Caller ID operation, if no key is pressed for more than 30 seconds, an error tone sounds and the telephone returns to standby mode. ! Each message can be up to 15 characters for the phone number and the name. ! The number of calls from the same Caller ID appears next to the received time. Once ...

Deleting all Caller ID names/numbers 1) With the phone in standby mode, press the CID key. 2) Press the delete/transfer key. 3) Press the volume/ /+ key to select Yes , and then press the select/channel key. You hear a confirmation tone and all stored Caller IDmessages are deleted. C A L L E R ID F ...

[32] You cannot make a call from the Caller ID list if your cordless phone is connected to a private branch exchange (PBX). Making a Call from the Caller ID List You can place a call from the Caller ID list.1) Press the CID key. Select the phone number that you want to dial by pressing the volume/ /...

Changing the Digital Security Code To protect you against misbilled calls which might result from your phone beingactivated by other equipment, the cordless phone provides AutoSecure (whichelectronically locks your phone when the handset is in the cradle) and Random Code digital security (which auto...

[34] Note on Power Sources Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, Low Battery appears on the LCD and none of the keys will operate. If the phone is in use, Low Bat...

[35] A D D IT IO N A L IN F O R M A T IO N Battery replacement and handling When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. Please contact your place of purchase or visit our website for ...

[36] Maintenance To maintain a good charge, it is important to clean the charging contacts on the handsets, main base and charging cradle. Using water only, dampen a cloth to clean the charging contacts. Then, make sure to go back over the charging contacts with a dry cloth. Caution Do not use paint...

[37] Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, visit our website for further information (www.uniden.com.au or www.uniden.co.nz). Symptom Suggestion The charge/ in use LED or • Make sure the AC...

[38] Severe noise interference. • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, roommonitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference.• Press the sel...

[39] A D D IT IO N A L IN F O R M A T IO N Liquid Damage Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps. Case Action If the handset or base is Wipe off the liquid, and use as normal. exposed to moisture or liquid, but it only aff...

[40] General Information Operating temperature: -10° to +50°C (+14°F to +122°F) AC Adapter Information (for the base) (for the charger) AC Adapter part number: AAD--041S AAD--600S Input Voltage: 230-240V AC 50Hz 230-240V AC 50Hz Output Voltage: 9V DC 350 mA 9V DC 210 mA Battery Information Battery p...

[41] Index A Connect the base unit ...........7 R AC adapter information .......40 Controls and Functions .....3, 4 Receiving a call ...................17 Audio boost .........................19 Register ..........................11,12 D Redial ............................18, 19 B Digital security c...

UNIDEN SSE15+1 CORDLESS PHONEImportant: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty is only valid in the original country of purchase. ELEMENT OF WARRANTY: Uniden warrants to the ori...

THANK YOU FOR BUYING A UNIDEN PRODUCT. © 2007 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China UPZZ01091ZA(0)