Page 2 - Customer Care
Customer Care At Uniden®, we care about you!If you need assistance, please do NOT return this product to your place of purchase. Our customer care specialists are available to serve you.Quickly find answers to your questions by: 1. Reading your owner’s manual, included with this product.2. Visiting ...
Page 3 - Contents
Contents Customer Care ............................................................................................. 2 IntroDuCtIon ..........................................................................4 FEATURES ......................................................................................
Page 4 - IntroDuCtIon; Features
4 IntroDuCtIon Features • 2.4GHz Digital FHSS • 4.3” high-resolution touchscreen LCD • Easy to use graphic interface • Secure, interference-free video • Up to 500’ wireless transmission • Video and audio transmission • Quad, Scan, and Full screen view • Supports up to 4 cameras • Infrared LEDs for n...
Page 5 - GettInG starteD; usInG thIs manuaL
5 GettInG starteD usInG thIs manuaL This manual is set up in six main sections: • Getting Started. This section describes your hardware and how to physically set it up. • Uniden Guardian™ Lullaboo Firmware Operations Overview. This section lists basic operations in an abbreviated format. It referenc...
Page 6 - GettInG to KnoW the monItor anD Camera
6 GettInG to KnoW the monItor anD Camera Receiver Power Dock Data Cable Connection AC Power Connection Power On/Off SD slot AC Power Connection Monitor (back/side) Cradle Pull-Out Stand Reset Antenna Light Sensor IR LEDs Charge Link Power LEDs Microphone Antenna PowerLinkDC Jack Camera Lens
Page 7 - What the LIGhts mean; LED; settInG uP the equIPment; set uP the monItor; button on the top of the monitor for 3 - 4 seconds to power it up.
7 What the LIGhts mean LED State What it means Power On (Blue) The camera is on. Off The camera is off. Link Flashing The camera is in pairing mode. On (Amber) The camera is connected to the monitor. Off The camera is in standby. Charge On (Green) The battery is charging. Off The battery has charged...
Page 8 - mount the Camera stanD; General Guidelines
8 mount the Camera stanD General Guidelines The camera included with your monitor is NOT weatherproof; it is an indoor camera. As dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the infrared LED and might lower video quality. Periodically clean the lens glass wit...
Page 9 - settInG uP Your sYstem; Camera settInGs
9 attaCh the Camera Place the stand swivel mount over the camera’s stand connection and slide the mount to the left until it clicks in place. ConneCt to PoWer 1. Insert the AC adapter power plug into the camera’s DC adapter input jack. Plug the other end into a 120 volt AC (standard indoor) power ou...
Page 10 - reCorDInG settInGs; Motion Detection (“Motion Detection” on page 22)
10 • Language (default language is English; “Changing the Language” on page 36) reCorDInG settInGs • Motion Detection (“Motion Detection” on page 22) • Schedule Recordings (“Schedule Record” on page 25)
Page 11 - live; LIVe sCreen
11 unIDen GuarDIan LuLLaBoo FIrmWare oPeratIon oVerVIeW Your baby monitor uses Uniden Guardian Lullaboo firmware to operate a series of screens that lets you choose groups of operations. For example, when you tap on the camera icon in the Pop Up menus, you can set how you want the main viewing scree...
Page 12 - What the ICons mean; Icon; • Full view (1 camera displays on full screen); Adjust the volume level.; Indicates memory capacity remaining.
12 What the ICons mean Icon What it does CamEra moDE Select how you want the Live screen to display camera input:• Scan between cameras (5 seconds) • Quad view (all paired cameras display) • Full view (1 camera displays on full screen) VoLumE Adjust the volume level. unIDEn GuarDIan LuLLaboo FIrmWar...
Page 15 - usInG Your sYstem; reCorDInG LIVe VIDeo; PLaYInG BaCK reCorDeD VIDeo; The Record List screen displays.; record list
15 usInG Your sYstem reCorDInG LIVe VIDeo 1. On the live screen, tap for the camera to begin recording. 2. Tap it again to stop recording. You can record from all cameras at the same time. PLaYInG BaCK reCorDeD VIDeo From the pop-up menus, tap the following icons as they appear on the screens: The R...
Page 16 - aDDInG neW Cameras; some thinGs to knoW about PairinG cameras
16 aDDInG neW Cameras Your monitor supports a total of four active cameras at a time. When you add a camera, you have to pair it to the monitor (that is, you have “introduce” the camera and monitor so they can communicate). some thinGs to knoW about PairinG cameras • If a camera is already assigned ...
Page 17 - troubleshootinG camera PairinG
17 troubleshootinG camera PairinG Consult the following table for camera pairing troubleshooting suggestions: If... try... the camera’s signal status icon shows no bars • making sure the camera is plugged in and the blue LED is on. • making sure that both the camera’s and the monitor’s antennas are ...
Page 18 - GuarDIan LuLLaBoo sCreen DesCrIPtIon; oVerVIeW; following icons as they appear; main Screen
18 GuarDIan LuLLaBoo sCreen DesCrIPtIon oVerVIeW This section describes the Guardian Lullaboo firmware screens in detail. It provides a path to the screen being viewed. GuarDIan LuLLaBoo settInGs sCreen From the pop-up menu, tap the following icons as they appear on the screens: This screen should d...
Page 20 - Camera setuP sCreen; some thinGs to knoW about PairinG cameras:; This screen should display:; on the camera’s side. The 60 second countdown will end when the
20 Camera setuP sCreen PaIrInG Your camera is paired to the monitor at the factory to channel 1. When you add a new camera to your system, you have to pair it to the monitor (that is, you have “introduce” the camera and monitor so they can communicate). some thinGs to knoW about PairinG cameras: • I...
Page 21 - Camera on
21 Camera on When you add a camera to your system, pair the camera with the monitor and the system will automatically turn it on. An X indicates a camera that is turned off; a check mark indicates the camera is turned on. From the pop-up menu, tap the following icons as they appear on the screens: T...
Page 22 - reCorDer setuP sCreen; Use the
22 briGhtness From the pop-up menu, tap the following icons as they appear on the screens: This screen should display: Tap the camera whose brightness level you want to change. The default brightness is 0, and the range is from -2 through 2. reCorDer setuP sCreen Use the recorder setup scree...
Page 23 - the following icons as they
23 2. Tap to return to the main motion detection screen. The Motion Detection default setting is to Low. The system records for 2 minutes when motion is detected. email alert The Guardian Lullaboo firmware can notify you when cameras detect motion by sending you an e-mail alert. The e-mail alert con...
Page 25 - For Gmail; schedule record; and; arrows to scroll through the times.
25 For Gmail SMTP Server Smtp.gmail.com Enter this. SMTP Port 465 Enter this. Username [email protected] Enter your gmail address in full, including @gmail.com. Password XXXXXXXXXX Enter the password for this gmail account. Email to [email protected] Enter the email address where you want the alerts sent....
Page 26 - recorder setup; netWorK setuP sCreen; network setup
26 4. Tap on the blank Date box. The recorder setup calendar screen displays. 5. Tap on the date you want the recording. The previous screen displays. 6. Set up the recording and then tap saVe . You can select another recording session to schedule, return the previous screen, or return to the live s...
Page 27 - Selection; at the system reboot prompt. The
27 internet setuP 1. Tap Internet Setup icon to display the internet setup screen. 2. Tap on your selection and fill in the fields requested. Tap oK . Selection Fields Static IP • IP Address • Subnet Mask • Default Gateway • DNS Server DHCP None 3. Tap oK at the system reboot prompt. The network set...
Page 28 - on the system reboot prompt. The
28 2. If you have not entered a security code, you can enter it here. If you have previously entered a security code, your current security code displays. The default security code is set to 123456. We recommend that you change this code to something you will remember. You will need the code to acce...
Page 29 - aLarm setuP sCreen; From the
29 netWork information screen 1. Tap the Network Information icon to display the network information screen. 2. Tap the arrow to return to the previous screen. The DID is a unique code specific to your monitor and is required (along with the security code) to gain remote access to your camera over t...
Page 31 - Tap the BACK arrow to return to the previous screen.; sYstem setuP sCreen; PoWer savinG
31 2. A check mark appears on the melody you tap and the monitor briefly plays a sample of the selected melody. 3. Tap the BACK arrow to return to the previous screen. sYstem setuP sCreen PoWer savinG When you turn on Power Saving mode, the monitor goes into sleep mode (LCD turns off) after it is id...
Page 32 - screen auto lock; button, whether or not the; arrow to return to the previous screen.
32 2. A check mark appears on your selection.3. Tap to return to the previous screen. screen auto lock When you turn on Auto Lock mode, the monitor will automatically enter screen lock mode after it has been idle for 2 minutes. Auto Lock disables the touchscreen and removes the icons from the displa...
Page 33 - The following screen displays:; clock alarm
33 time The time screen lets you set up clock alarms, set the system time, and set a timer. From the pop-up menu, tap the following icons as they appear on the screens: The following screen displays: clock alarm This feature operates as an independent alarm clock. It does not affect the oper...
Page 34 - time settinG
34 4. Tap on the minute block. The uP/DoWn arrows move to the minute block. Set the minute. 5. Tap on am/Pm to toggle between the two. 6. Tap saVe when you are finished. time settinG This screen contains fields to set the Month, Day, Year, Hour, Minute, and AM/PM. 1. Tap to display the time setting ...
Page 35 - to begin the timer. When the timer reaches; format storaGe
35 timer This feature operates as an independent timer. It does not affect the operation of live video or recording video. 1. Tap to display the timer screen. 2. Tap on each field to set it. The uP/DoWn arrows shift to that field. Use uP/DoWn to set the field. 3. Tap start to begin the timer. When t...
Page 36 - to proceed to format storage or tap; to discontinue and return to the previous; sYstem uPGraDe; LanGuaGe; chanGinG the lanGuaGe
36 1. Tap on start ; a warning statement displays. 2. Tap oK to proceed to format storage or tap CanCeL to discontinue and return to the previous screen. 3. The system indicates success or failure. sYstem uPGraDe To upgrade the Uniden Guardian Lullaboo firmware, you will need to download the file fr...
Page 37 - do not want to reset the language, tap; and return to the previous screen.; quICK tIPs; The
37 From the pop up menus, tap the following icons as they appear on the screens: This screen should display: 1. Select a language to change to that language. The restore default settings screen displays. 2. Tap oK to continue with the language reset. The system will reboot in about 5 seconds...
Page 38 - remote aCCess; sYstem requIrements; ConneCtInG to the Internet
38 remote aCCess oVerVIeW Uniden’s Lullaboo baby monitor lets you view live video from your Windows® PC, an iPhone®, iPad®, or Android TM smartphone or tablet. Free apps are available through the iTunes® App Store or the Android Market. This system uses P2P remote access technology and does not requ...
Page 39 - ConneCtInG to the Intranet (home netWorK); DoWnLoaDInG anD usInG the aPPs; anDroID; doWnload; smart phone or tablet with your system to remotely connect to
39 2. Connect the other end into your primary router (typically, the router from your service provider). 3. Place cradle maximum distance away from your router.4. Insert the monitor into the cradle. A screen asks if you want to connect to the internet or to only charge the monitor. 5. Tap connect . ...
Page 41 - aPP oPeration; System Setup; return
41 aPP oPeration When you open the APP on your Android phone, the image displayed on the main screen is the last camera image, captured automatically, from your previously established session. Main screen Tap to add an additional Guardian system. Tap to enter System Setup page. Tap to refresh the sy...
Page 42 - IPhone®; When you tap
42 IPhone® In a similar fashion to the Android smart phone, you can use the Apple® iPhone® smart phone or iPad® tablet with your Lullaboo system to remotely connect to and view camera videos. Follow these steps to download the Uniden Guardian iPhone® App and set it up to work with your Lullaboo. doW...
Page 44 - soLVInG ProBLems; If...; Record; “Camera On” on page 21)
44 soLVInG ProBLems If you have any trouble with your system, try these simple steps. If you are still having a problem with your camera, check the manual that came with your camera. If you still have a question, call our Customer Care Line; see “Customer Care” on page 2. If… try.. The motion sensor...
Page 45 - Live
45 If… try.. The camera won’t pair with the monitor • Making sure the camera is plugged in and the blue (Power) LED is on and the yellow (Pairing) LED is flashing. • Pressing and releasing the pairing button quickly. Do not press and hold the pairing button. When I power up my monitor and camera for...
Page 46 - aDDItIonaL InFormatIon; ProDuCt sPeCIFICatIons; radio Frequency transceiver
46 aDDItIonaL InFormatIon ProDuCt sPeCIFICatIons radio Frequency transceiver RF Frequency 2.4 GHz Modulation GFSK Spread spectrum Frequency Hopping Anti Interference Clean Channel Dynamic Select Selectable camera channel 4 Data rate 2 Mbps Transmitting range 500 feet (152 meters) in an open area (li...
Page 47 - Lithium-Polymer Battery Warning; This equipment contains a rechargeable lithium-polymer battery.; recycling and Disposal Information; to find an
47 System Specifications Camera monitor Operating voltage 5 V DC @ 1 Amp Power consumption 650 mA max Low light solution 12 IR LEDs, 1 Low light sensor Low light sensitivity 1-8 lux Picture sensor OV7725 1/4’ Color CMOS Lens F3.6mm H:53 V:40 Lithium-Polymer Battery Warning • This equipment contains ...
Page 48 - FCC Compliance Information; Part 15 Compliance statement; Reorient or relocate the receiving antenna.; rF exposure Information
48 • If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for recycling. FCC Compliance Information Part 15 Compliance statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this ...
Page 49 - IC Compliance Information; radio equipment notice; Ce Compliance Information
49 IC Compliance Information radio equipment notice The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must a...
