Uniden FP100 - Manual - manualsarea.com

Page 2 - INTRODUCTION

2 INTRODUCTION Congratulations on the purchase of your Uniden FP100 Telephone. The FP100 has been designed and engineered to exacting standards for reliability, long life and outstanding performance. To obtain the full benefit from your new telephone, please read this OperatingGuide thoroughly. For ...

Page 5 - IMPORTANT INFORMATION; IMPORT

5 IMPORTANT INFORMATION When using your telephone equipment, basic safety precautions should always befollowed to reduce the risk of fire, electrical shock, and injury to persons,including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the p...

Page 6 - CARING FOR YOUR TELEPHONE; CAUTION; PLEASE READ BEFORE USE AND

CARING FOR YOUR TELEPHONE Clean your telephone using a soft damp cloth. Do Not Use solvents, detergents, sprays, abrasive pads,scouring powder or other products that may damage your telephone.Do Not place the telephone in direct sunlight.Do Not Use in extreme humidity. CAUTION IMPORT ANT INFORMA TIO...

Page 10 - FEA; call

10 FEA TURES & FUNCTIONS FEATURES & FUNCTIONS 1. Button 2. Button 3. Button 4. Button 5. Handset Retainer Tab 6. Telephone Number Card 7. Numeric Keypad 8. call LED 9. status LED 10. Button 11. Button 12. tone Slide Switch 13. Not used14. Telephone Line Jack15. ringer Volume Switch (Hi/Med/L...

Page 11 - INSTALLATION; HANDSET CORD CONNECTION

• Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected. • Use caution when installing or modifying telephone lines. CAUTION 11 INSTALLATION INST ALLA TION HANDSET CORD CONNECTION Plug one end o...

Page 12 - WALL MOUNTING

INST ALLA TION INSTALLATION WALL MOUNTING You can mount your phone directly on a wall. Before mounting your phone,consider the following:• Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall. •...

Page 13 - USING

MEMORY DIAL NUMBERS 3 one touch speed dial numbers can be stored into the memory of your telephone. STORING ONE-TOUCH SPEED DIAL MEMORIES 1. To program One-Touch Memories ( ~ ). a. Pickup the Handset.b. Press the button. c. Enter telephone number that you want to program.d. Press the button. e. Pres...

Page 14 - PAUSE; DIALING ONE TOUCH SPEED DIAL MEMORY NUMBERS

USING YOUR FP100 USING YOUR FP100 PAUSE During the memory storage procedure you may enter a 4 second delay betweennumbers (for accessing a switchboard, or long distance service) by pressing the button on the Handset at the point in the number sequence you wish to pause. The button counts as one digi...

Page 15 - ADJUSTING THE RINGER VOLUME CONTROL; LED Indicators; status

15 USING YOUR FP100 USING YOUR FP100 ADJUSTING THE RINGER VOLUME CONTROL While the phone is ringing, you can adjust the ringer volume of your telephone bymoving the ringer switch to the desired low/medium/high position. ADJUSTING THE RINGER TONE CONTROL While the phone is ringing, you can adjust the...

Page 16 - PLACING A TELEPHONE CALL

16 USING YOUR FP100 USING YOUR FP100 PLACING A TELEPHONE CALL 1. Remove the Handset from the Base.2. Press the keypad buttons to dial the phone number you want.3. After you have completed the phone call, place the Handset back on the Base. REDIAL If you want to redial the last number dialed, simply ...

Page 17 - TROUBLESHOOTING

TROUBLESHOOTING Problem Can’t make or receive calls. Can’t hear the telephone ringing. One Touch Speed Dial Numbers are not working correctly. Handset does not hang up in the wall mountPosition. Suggestion • Make sure you use only the telephone line cord supplied with this telephone. • Check that bo...

Page 18 - Specifications for New Zealand Model; SPECIFICATIONS; Specifications for Australian Model; SPECIFICA

18 Specifications for New Zealand Model Compliance PTC200 Size: 150mm(W) x 225mm(D) x 70mm(H) Weight: Approx. 536g Specifications, Features and availability of Optional Accessories shown are typicaland subject to change without notice. NOTE: FOR USE OF THIS DEVICE IN NEW ZEALAND 1. The grant of a Te...

Page 19 - One-Year Limited Warranty

19 WARRANTY W ARRANTY One-Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: Uniden Australia Pty Limited ACN 001 865 498 Uniden New Zealand Limited ELEMENTS OF WARRANTY : Uniden warrants to the original retail owner for the duration of this w...

Page 20 - THANK YOU; FOR