Uniden EXS 9660 - Manual

3 INCLUDED IN YOUR PACKAGE Handset Rechargeable Battery Long Telephone Cord Base Short Telephone Cord AC Adapter Beltclip Desktop/Wall Mount Adapter Wall Mounting Screws l This Owner’s Manual l Precautions and Important Safety Instructions l Registration Card To get the most fromyour phone, please r...

INST ALLIN G 4 Before choosing a location for your new phone, read theINSTALLATION CONSIDERATIONS included in the PRECAUTIONS ANDIMPORTANT SAFETY INSTRUCTIONS brochure. Here are someimportant guidelines you should consider: l The location should be close to both a phone jack and acontinuous power ou...

5 1. Snap the desktop/wall mount adapter into the top of the base as shown. 2. Plug the AC adapter cord into the 10V DC input jack on the back of the base. 3. Wrap the AC adapter cord around the strain relief notch. 4. Plug the AC adapter into a standard 120V AC wall outlet. 5. Charge the battery (r...

DO NOT use an outlet controlled by awall switch. t Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1. Snap the desktop/wall mount adapter into the bottom of the baseas shown. 2. Plug the AC adapter into the base. 3. Place the AC adapter cord inside the mo...

1. Press the battery cover release. Slide cover off. 2. Install the nickel-cadmium battery with the label down. 3. Slide the battery cover forward until it snaps into place. INSTALLING THE HANDSET BATTERY PACK 10 Use only Uniden Battery(model BT-990) suppliedwith your phone. exs9660 Reference Guide....

11 t Initial battery charging Before connecting your phone for the first time, charge therechargeable battery pack for 15-20 hours without interruption. 1. Place the handset on the base. 2. Make sure that status LED lights. If the LED doesn’t light, be sure the ACadapter is plugged in and the handse...

Most phone systems usetone dialing. Check withyour local phonecompany if you’re notsure whether yoursystem is tone or pulse. 12 t Low battery indicator When the battery pack is very low and needs to be charged, the phone is programmed toeliminate some functions to save power. If thephone is not in u...

13 t Handset ringer volume Remove the handset from the base. Press the vol s or t key on the handset to set the handset ringer volume. There aretwo ringer volume settings; high and low. To select the high volume setting, press vol s . The following screen displays: To select the low volume setting, ...

t To attach the beltclip 1. Remove the slot cover. 2. Insert the beltclip into the empty slot. Press down until it clicks. t To remove the beltclip 1. Pull back on the release tab. Lift the beltclip up. 2. Replace the slot cover. You can store either the beltclip, or the slot cover, in the bottom of...

Your phone may be used with an optional headset, the Uniden HS910. To use this feature, simply plug the headset plug into the headset jack. Your phone is ready forhands-free conversation. To prevent other parties from making unauthorized calls on yourphone line, a digital code was added to the EXS 9...

1. Press line 1 or line 2 . 2. Listen for dial tone.3. Dial number. or 1. Dial number.2. Press line 1 or line 2 . 1. Press line 1 or line 2 . 2. Listen for dial tone.3. Press redial . 1. Press line 1 or line 2 . 2. Listen for dial tone.3. Dial number. t Basic 2-line operation 16 USIN G YOUR NEW PHON...

17 When you have connected power and a telephone line to your EXS 9660, the phone is in “ Standby mode ,” ready to receive and make calls. For clarity, the instructions in this Owner’s Manual designates line 1unless the procedure requires using line 2. The same instructions applyto line 2. 1. The ba...

18 1. The handset rings and the following screen appears: 2. Press line 1 to answer your call. 3. When you finish the call press line 1 on the handset, or return the handset tothe base. 1. Press line 1. 2. Dial the number on the keypad, or, use the memory feature. (See USINGMEMORY DIALING, page 34.)...

t On-Hook Dialing 1. Pick up the handset. 2. Dial the number on the keypad, or use one of the memory features. (See USING MEMORY DIALING, page 34). 3. Press line 1 . 4. When you finish the call, press line 1 , or return the handset to the base. If you are dialing in the pulse mode and need to enter ...

The redial key redials the last number dialed. The redialed number can be up to 32 digits long. To redial from the handset: Press line 1 , then press redial . Or, press redial , then press line 1 . If any key is pressed before redialing, thelast number will not redial. To redial from the base: Press...

21 You can mute your conversation from the base. This prevents the partyyou are speaking to from hearing what you, or someone else in theroom, is saying. For example, to use this privacy feature while using line 1. 1. Press mute . The line 1 LED flashes red. You can hear the party on line 1, butthey...

25 t From the Base to the Handset 1. Press page/int’com on the base. The handset beeps. (If no answer, press page/int’com again to disconnect.) 2. Press int’com on the handset. Speak into the mouthpiece to answer the page. To hang up at the base: Press page/int’com. To hang up at the handset: Press ...

t From Handset to Base 1. To transfer a call from the handset to the base, press hold. The line 1 LED turns red. 2. On the handset, press int’com. The status LED flashes on the base. The following screen appears: 3. Answer at the base by pressing page/int’com . You may then announce the call with th...

Your EXS 9660 stores up to 30 name/numbers in the handset plus 10numbers in the base. Memory locations are shared by both lines. t On the Handset 1. Remove the handset from the base. 2. Press and hold memory for two seconds. The following screen appears: 3. Use the s and t keys, or number keypad, to...

30 To edit a number you have stored in the handset: 1. Remove the handset from the base. 2. Press and hold memory for two seconds. The display shows the Memory Store screen and any saved name/numbers. 3. Use the s and t keys or number keypad to select the memory location youwould like to edit. 4. Pr...

After erasing a number, you may add a new address to memory. t From the Handset 1. Remove the handset from the base. 2. Press and hold memory for two seconds. The handset shows the Memory Store screen with saved name/numbers displayed. 3. Use the s and t keys, or number keypad, to select the memory ...

Follow the steps below to dial a number using a programmed memory location. t On-Hook Dialing from the Handset 1. Press memory . The handset displays your programmed memory locations. 2. Use the s and t keys to select the memory location you would like to dial. Or, you may enter a memory location nu...

36 USIN G You must subscribe to Caller ID from your phone companyto use this feature. t Setting up Caller ID options There are three Caller ID options available; they are AutoTalk, CIDCW,and Area Code. AutoTalk allows you to answer the phone without pressing line 1 or line 2 . If the phone rings whe...

44 If your phone is not performing to your expectations, please try thesesimple steps before calling Uniden customer service at (800) 297-1023. QUICK REFERENCE CHART TR OUBLESHOOTIN G YOUR NEW PHONE The charge LEDwon’t come onwhen the handsetis placed in the base. l Make sure the AC adapter is plugg...

The EXS 9660 complies with FCC Parts 15 and 68.Frequency control: PLL Modulation: Direct Sequence Spread Spectrum; DBPSK Operating temperature: 0º to +50º C (+32º F to +122º F) Frequency: 904.2 to 925.8 MHz (20 channels) Power requirements: 10V 500 mA (from AC adapter) Size: 7-3/8 in.(W) x 3-1/2 in....

FOR PUR CHASIN G A UNIDEN PHONE THANK Y O U Covered by one or more of the following patents: 4,511,761 4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905 5,491,745 5,533,010 5,574,727 5,650,790 5,660,269 5,661,780 5,663,981 5,671,248 5,717,312 5,754,407 5,768,345 5,787,356 5,838,721  1999 ...