Uniden EXR2460 - Manual

I n s t a l l i n g a n d A d j u s t i n g Yo u r P h o n e DESK/TABLETOP INSTALLATION 1) Plug the AC adapter cord into the 10 V DC input jack on the back of the base. 2) Wrap the AC adapter cord around the strain relief notch. 3) Plug the AC adapter into a standard 120 V AC wall outlet. 4) Charge ...

7) Attach the desktop stand to the base. 8) Set the base on a desk or tabletop and place the handset into the base. Then, raise the antenna to a vertical position. WALL INSTALLATION ▼ Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1) Remove the mounting ...

INSTALLING THE HANDSET BATTERY PACK 1) Press in on the battery cover release and slide the cover down until it comes off. 2) Install the nickel-cadmium battery with the label facing down. 3) Slide the battery cover on until it snaps into place. 10 ! Use only Uniden batterymodel (BT2499) suppliedwith...

CHARGING THE BATTERY PACK ▼ Initial battery charging Before plugging the phone line into your new phone for the first time, fully charge the battery pack for 12-15 hours without interruption. 1) Place the handset on the base. 2) Make sure that status LED lights. If the LED doesn’t light, check to se...

▼ Low battery indicator When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, Low Battery flashes. If the phone is in use, Low Battery flashes and the handset beeps. Complete your conversation as ...

ADJUSTING THE HANDSET VOLUME CONTROLS ▼ Handset ringer volume When the phone is in standby mode, pressing the vol ▲ or ▼ key on the handset selects the handset ringer volume. There are two ringer volume settings; high and low.To select the high volume setting, press vol ▲ . The handset displays Ring...

INSTALLING THE BELTCLIP ▼ To attach the beltclip 1) Remove the slot cover. 2) Insert the beltclip into the empty slot and press down until it clicks. ▼ To remove the beltclip 1) Pull back on the release tab and pull the beltclip up. 2) Replace the slot cover. You can store either the beltclip or slo...

U s i n g Yo u r N e w P h o n e MAKING AND RECEIVING CALLS Handset On Base Handset Off Base To answer a call 1) Pick up the handset.2) If not in Autotalk Mode, press talk . 1) Press any key.2) If not in Autotalk Mode, press talk . To make a call 1) Pick up the handset. 2) Press talk . 3) Listen for...

STORING A PHONE NUMBER IN MEMORY 1) Remove the handset from the base. 2) Press and hold memory until the confirmation tone sounds. The following screen appears. 3) Use the : and ; keys or number keypad to choose the memory location where you would like to enter a number. 4) Press select . The follow...

EDITING A PHONE NUMBER IN MEMORY Follow these steps to edit a phone number that you have already programmed into memory. 1) Remove the handset from the base. 2) Press and hold memory until the confirmation tone sounds. The display shows the Memory Store screen and any saved numbers. 3) Use the : and...

9) Press select. The handset beeps and displays a confirmation screen. For example, if you store a name and number into memory location number one, then the handset shows Memory 1 Stored . 10)The display then returns to the Memory Store screen. You may select another number to edit (return to step 3...

8) Press select . There is a confirmation tone, and the handset displays Memory 1 Deleted . 9) The display then returns to the Memory Store screen. You may select another number to delete (return to step 3) or you may press memory to return to standby. USING MEMORY DIALING Follow the steps below to ...

USING CALLER ID You must subscribe to Caller ID from your phone company in order to use this feature . ▼ Setting up Caller ID options There are three Caller ID setup options available; they are Autotalk, CIDCW, and Area Code. AutoTalk allows you to answer the phone without pressing the talk button. ...

4) A confirmation tone sounds, and the following screen appears. 5) Press call id to return to standby. USING REDIAL The redial key redials the last number dialed. The redialed number can be up to 32 digits long. To call the last number dialed from the handset, press talk , then press redial . or Pr...

USING THE PAGE FEATURE To locate the handset (while it’s off the base), press page on the base. To beep the handset for 5 seconds, press page on the base, and the handset displays paging. To beep the handset for 60 seconds, press and hold page . Press talk on the handset to end paging. Press talk ag...

Tr o u b l e s h o o t i n g QUICK REFERENCE CHART If your phone is not performing to your expectations, please try these simple steps before calling Uniden customer service. If you are still unable to resolve the problem, call customer service at (800) 297-1023. PROBLEM SUGGESTION The charge light ...

S p e c i f i c a t i o n s G E N E R A L The EXR2460 complies with FCC Parts 15 and 68.Frequency control: PLLModulation: Direct Sequence Spread Spectrum; DBPSKOperating temperature: 0° to 50° C (+32° F to +122° F) B A S E Frequency: 2400 to 2483.5 MHz (20 channels)Power requirements: 10 V 500 mA (f...