Uniden EXP2240 - Manual - manualsarea.com

Page 2 - Introduction; Controls and Functions

1 Introduction The Uniden EXP2240 Series (EXP2240/EXP2241/EXP2243) 2.4 GHz cordless phones are designedand engineered to exacting standards for reliability, long life, and outstanding performance. ▼ Features • 2.4 GHz Extended Range Technology • 10-Number Memory Dialing • 20 Channel Autoscan • Pulse...

Page 3 - Do the following steps:; A. Choose the best location; Included with Your Phone

2 Do the following steps: A. Choose the best location C. Connect the base unit B. Install the battery pack D. Choose the dialing mode A. Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS includedin the PRECAUTIONS AND IMPORTANT SAFETY INSTRU...

Page 4 - Low Battery Alert; C. Connect the base unit; plugging into the phone line

3 4) Place the handset on the base. Be sure there is sufficient space to raise the base antenna to a vertical position. NOTE: Use only the Uniden Battery (BT-905) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department. Battery use time (per charge) Fro...

Page 5 - Making and Receiving Calls; D. Choose the dialing mode; Handset On Base; Using Your Phone; Handset Off Base

Making and Receiving Calls NOTES: • The redial/p key redials the last number dialed. • The redialed number can be up to 24 digits long. 5) Connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged. TIP : If your telephone outlet isn’t modular, cont...

Page 6 - Terminology; Standby Mode; Talk Mode; Adjusting the Ringer and Earpiece Volume; Ringer tone; Tone Dialing Switch-over; Selecting a Different Channel

5 Terminology Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminologyexplanation. • Standby Mode - The handset is not in use, off the base, and talk has not been pressed. A dial tone is not present. • Talk Mode - The handset is off the base and talk has been pr...

Page 7 - Storing a Phone Number in Memory; Dialing a Stored Number; Using the memory location features

6 Page To locate the handset (while it’s off the base), press find handset on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any key, find handset on the base or return the handset to the base. Flash and Call Waiting If you have “call waiting” service and a call waiting...

Page 8 - Chain Dialing; Changing the Digital Security Code

7 One-touch RocketDial Your phone is equipped with “One-touch RocketDial” for instant dialing. It isused to dial the phone number stored in memory location 1. (See “Storing aPhone Number in Memory”.) To instantly dial the phone number stored in memory location 1, simply press RocketDial . (There is ...

Page 9 - Troubleshooting; Symptom; Suggestion

8 Troubleshooting If your EXP2240 Series cordless telephone is not performing to your expectations, please try thesesimple steps. NOTE : Do not attempt to service this unit yourself. Servicing must be performed by qualified personnel. Symptom The status LED won’t illuminate when the handset is place...

Page 10 - Rechargeable Nickel-Cadmium Battery Warning; Important Safety Instructions; Important Electrical Considerations; The FCC Wants You To Know

9 Precautions! Before you read anything else, please observe the following: Warning! Uniden America Corporation DOES NOT represent this unit to bewaterproof. To reduce the risk of fire, electrical shock, or damage to theunit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium B...

Page 11 - Installation Considerations; One Year Limited Warranty

10 the trouble has been corrected. Radio Interference Radio interference may occasionally cause buzzing and humming in yourcordless handset, or clicking noises in the base. This interference iscaused by external sources such as TV, refrigerator, vacuum cleaner,fluorescent lighting, or electrical sto...

Uniden EXP2240 - Manual

Table of Contents:

Summary

Other Uniden Models