Uniden DSS3415+1 - Manual

[8] 24. Base charging contacts25. key 26. Base Antenna27. Charge LED28. DC in 9V Jack29. TEL LINE Jack30. Registration Button (not used) [find hs] Parts of the Base

[9] B P Handset Icons ICON STATUS DESCRIPTION Standby/Talk Standby Talk Talk Talk Talk The icon indicates the handset battery status: full, medium, low, and empty. The icon indicates that the ringer is turned off. The icon appears when you mute the handset. The icon appears when the Clarity Boost fe...

The Standby Screen When the phone is in standby, the handset display shows the following items: [10]

[11] Using the Interface Using the Handset Menus Using the Four-way Function Key [menu/clear] [select/ ] [ ] Your handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button. By moving this key to the left,...

[12] Entering Text from Your Handset You can use the number keypad on your phone to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to dis...

Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: • The location should be close to both a phone jack and a power outlet that is not controlled by a wall switch. • The base and handset should be kept a...

[14] Installing the Rechargeable Battery Use only the Uniden BT-909 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install a battery. 1. Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to...

[15] Connecting the Base and Charging the Handset 1. Connect the AC adapter to the DC IN 9V jack. 2. Connect the AC adapter to a wall outlet that is not controlled by a switch. 3. Place the handset in the base with the LCD screen facing forward. 4. Make sure that the charge LED illuminates. If the L...

[16] Installing the Belt Clip 1. Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. 2. To remove the belt clip , pull either side of the belt clip to release the tabs from the holes.

[18] Testing the Connection To test your connection try making a call. If your call connects, the settings are fine. If your call does not connect check the following: 1. Check the AC adapter cord. Make sure it is securely connected to the DC IN 9V connector and to a standard AC power outlet. 2. Che...

[19] Basic Setup Setting the Day and Time Note: If you don't press any keys for two minutes when setting the day and time, the phone exits the menu. [menu/clear] [select/ ] [select/ ] [select/ ] [select/ ] To change the day and time shown in the display, follow the steps below. 1. Press . Select the...

Activating Caller ID on Call Waiting Activating Distinctive Ring Your phone supports Caller ID on Call Waiting (CIDCW), so you see the name and number of someone who calls when you're already on the line. You need to subscribe to these features with your phone company before you can use them. The Ca...

number into your phone, you can simply press to access your voice mail. When you subscribe to the service, your voice mail provider provides you with the access number and the required voice mail signaling tone. [select/ ] Notes: Voice Mail Access Numbers : Australia - Message Bank : 125101, Home Me...

[22] Activating Name Tag (POP ID) Activating the Insert 0 The Name Tag feature works with the Caller Display number from Caller ID. A subscription to the Caller ID service is required from your network provider. There is usually a fee for this service. When the phone rings the received Caller Displa...

[23] Adding Extra Handsets Your phone supports up to four handsets, including any handsets supplied with your phone. Accessory handsets do not need to be connected to a phone jack. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. The ...

[24] Registering Accessory Handsets If you purchase an accessory handset, you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, pre-registered handsets display a handset ID ...

[25] Resetting Handsets Creating Phonebook Entries If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset. 1. Press and hold and for at least 5 seconds, until the SYSTEM RESET menu...

[26] keypad to enter a name for this entry; the name can contain up to 16 characters. (See page 12 for entering text instructions.) If you do not want to enter a name for this entry, your phone stores this entry as <No Name>. Press 5. Enter the number for this entry (STORE/EDIT NO.). Once you ...

[27] Finding a Phonebook Entry Press to open the phonebook. Then, select DIAL/EDIT. Phonebook entries are stored in alphabetical order. To scroll through the phonebook from A to Z, press . To scroll through the phonebook from Z to A press . You can also use the letters on the number keys to jump to ...

[29] Deleting All the Phonebook Entries at Once Copying Phonebook Entries to Another Handset 1. When the phone is in standby, press . 2. Move the cursor to select DELETE ALL, and press . DELETE ALL? appears in the display. 3. Select YES, then press . A confirmation tone sounds, and DELETED! appears ...

[30] Customizing Your Phone Changing the Handset Banner [menu/clear] [select/ ] Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more t...

[31] Selecting Ring Tones You may choose from 10 melodies or 10 tones for your phone's primary ring tone. Each station can use a different ring tone or melody. The available ring tones are listed below: 1. Press . 2. Select the HANDSET SETUP menu, and then the RINGER TONES submenu. 3. Move the curso...

[33] Using Your Phone Making a call Answering a call Hanging up From a cordless handset [ / flash] OR [ / flash] [ / flash] [ ] From a handset speaker phone [ ] OR [ ] [ ] [ ] 1. Remove the handset from the charging cradle. 2. Press . 3. Listen for the dial tone. 4. Dial the number. 1. Remove the ha...

[34] Keypad Lock Use Keypad Lock to disable key response. You can still answer calls, receive page and receive copy phonebook locations - keylock will reactivate after these operations. To lock the keypad To unlock the keypad Press and hold until you hear a confirmation tone. KEYPAD LOCKED appears. ...

[36] Using Call Waiting If you have Call Waiting service and a second call comes in when you are on the phone, a call waiting tone will sound. Press and then to switch between callers. There is a short pause during the switch. Press to switch between callers. There is a short pause during the switch...

[37] Redialing a Number Deleting a Redial Record Adjusting the Ringer, Earpiece, and Speaker Volume You can quickly redial the last 3 numbers dialed on each handset. If you want to delete a phone number from the handset's redial list, follow the steps below: 1. With the phone in standby, press . 2. ...

[38] Adjusting the Earpiece and Speaker Volume Adjusting the Audio Tone and Clarity Boost Finding a Lost Handset You can choose from six volume levels for the earpiece and speaker. To adjust the volume while on a call, press to make it louder or to make it softer. If you aren't satisfied with the au...

[39] Using Hold, Conference, and Transfer Conferencing Placing a Call on Hold During a call, press on the handset to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read LINE ON HOLD. To return to the party on hold, press or on a handset. Th...

[41] Using Special Features Muting the Ringer (One Call Only) Muting the Microphone Privacy Mode While a handset is ringing, press on the handset to mute the ringer for this call. The phone rings again on the next call. Mute turns off the microphone so the caller can't hear you. The display shows wh...

[42] Using the DirectLink Communication Feature Using the DirectLink feature, a pair of handsets can function as two-way radios. You can have up to two pairs of handsets using DirectLink at a time. DirectLink communication does not interfere with the main base's ability to make or receive telephone ...

[43] Making a DirectLink Call Exiting DirectLink Operation Making an Intercom Page 1. To call another handset with DirectLink communication, press . 2. The display shows TO DIRECTLINK A HANDSET PRESS . 3. Press the number of the handset you want to call. If the handset is out of range or not using D...

[44] Answering an Intercom Page Room/Baby Monitor When the intercom page tone sounds, the display shows the ID of the station that is paging. From the handset, press or . If AutoTalk is on, the handset automatically answers the page when you remove the handset from the cradle. If Any Key Answer is o...

[46] Maintenance Warning Battery Replacement and Handling Battery Contact Maintenance With average use, your phone's battery should last approximately one year. To order replacement batteries, please visit www.uniden.com.au (Australian Model) or www.uniden.co.nz (New Zealand Model). To maintain a go...

Low Battery Alert Troubleshooting When the battery pack is very low, the phone is programmed to eliminate functions in order to save power. The battery pack needs to be charged when the empty battery icon appears. When LOW BATTERY appears in the display and the phone is in standby, none of the keys ...

[48] To reset the handset, do the following: [ ] [#/>] Note: It is also possible to reset the handset back to its original factory settings. All changes including phonebook entries and Caller ID information will be erased. For more information on resetting the handset back to factory settings and...

[52] Liquid Damage Moisture and liquid can damage your cordless phone. Follow the suggestions below if your phone gets wet: If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. If moisture or liquid has en...

[53] Specifications Operating Temperature 0° C to +50° C (+32° F to +122° F) Notes: Part Number Base: AAD-041S Charging cradle: AAD-600S Input Voltage Base: 240V AC, 50 Hz Charging cradle: 240V AC, 50 Hz Output Voltage Base: 9V DC @ 350 mA Charging cradle: 9V DC @ 210 mA Use only the supplied AAD-04...

[54] Index A B C D E F H I K L M N O P R S T V Adjusting Audio Tone 38 Answering a Call 33 Any Key Answer 32 AutoTalk 32 Battery Contact Maintenance 46 Battery Replacement and Handling 46 Caller ID on Call Waiting 20 Clarity Boost 38 Controls Part of the Handset 7 Day and Time 19 Deleting a Redial R...

[55] Important: Warrantor: ELEMENT OF WARRANTY: WARRANTY DURATION: PARTS COVERED: STATEMENT OF REMEDY: PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: Evidence of original purchase is required for warranty service. Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Uniden...

THANK YOU FOR BUYING A UNIDEN PRODUCT. © 2006 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China UPZZ01411BZ(0)